Special cases: *
value.
*/
CesiumMath.sinh = function(value) {
var part1 = Math.pow(Math.E, value);
var part2 = Math.pow(Math.E, -1.0 * value);
return (part1 - part2) * 0.5;
};
/**
* Returns the hyperbolic cosine of a number.
* The hyperbolic cosine of value is defined to be
* (ex + e-x)/2.0
* where e is Euler's number, approximately 2.71828183.
*
* Special cases: *
value.
*/
CesiumMath.cosh = function(value) {
var part1 = Math.pow(Math.E, value);
var part2 = Math.pow(Math.E, -1.0 * value);
return (part1 + part2) * 0.5;
};
/**
* Computes the linear interpolation of two values.
*
* @param {Number} p The start value to interpolate.
* @param {Number} q The end value to interpolate.
* @param {Number} time The time of interpolation generally in the range [0.0, 1.0].
* @returns {Number} The linearly interpolated value.
*
* @example
* var n = Cesium.Math.lerp(0.0, 2.0, 0.5); // returns 1.0
*/
CesiumMath.lerp = function(p, q, time) {
return ((1.0 - time) * p) + (time * q);
};
/**
* pi
*
* @type {Number}
* @constant
*/
CesiumMath.PI = Math.PI;
/**
* 1/pi
*
* @type {Number}
* @constant
*/
CesiumMath.ONE_OVER_PI = 1.0 / Math.PI;
/**
* pi/2
*
* @type {Number}
* @constant
*/
CesiumMath.PI_OVER_TWO = Math.PI * 0.5;
/**
* pi/3
*
* @type {Number}
* @constant
*/
CesiumMath.PI_OVER_THREE = Math.PI / 3.0;
/**
* pi/4
*
* @type {Number}
* @constant
*/
CesiumMath.PI_OVER_FOUR = Math.PI / 4.0;
/**
* pi/6
*
* @type {Number}
* @constant
*/
CesiumMath.PI_OVER_SIX = Math.PI / 6.0;
/**
* 3pi/2
*
* @type {Number}
* @constant
*/
CesiumMath.THREE_PI_OVER_TWO = (3.0 * Math.PI) * 0.5;
/**
* 2pi
*
* @type {Number}
* @constant
*/
CesiumMath.TWO_PI = 2.0 * Math.PI;
/**
* 1/2pi
*
* @type {Number}
* @constant
*/
CesiumMath.ONE_OVER_TWO_PI = 1.0 / (2.0 * Math.PI);
/**
* The number of radians in a degree.
*
* @type {Number}
* @constant
* @default Math.PI / 180.0
*/
CesiumMath.RADIANS_PER_DEGREE = Math.PI / 180.0;
/**
* The number of degrees in a radian.
*
* @type {Number}
* @constant
* @default 180.0 / Math.PI
*/
CesiumMath.DEGREES_PER_RADIAN = 180.0 / Math.PI;
/**
* The number of radians in an arc second.
*
* @type {Number}
* @constant
* @default {@link CesiumMath.RADIANS_PER_DEGREE} / 3600.0
*/
CesiumMath.RADIANS_PER_ARCSECOND = CesiumMath.RADIANS_PER_DEGREE / 3600.0;
/**
* Converts degrees to radians.
* @param {Number} degrees The angle to convert in degrees.
* @returns {Number} The corresponding angle in radians.
*/
CesiumMath.toRadians = function(degrees) {
if (!defined(degrees)) {
throw new DeveloperError('degrees is required.');
}
return degrees * CesiumMath.RADIANS_PER_DEGREE;
};
/**
* Converts radians to degrees.
* @param {Number} radians The angle to convert in radians.
* @returns {Number} The corresponding angle in degrees.
*/
CesiumMath.toDegrees = function(radians) {
if (!defined(radians)) {
throw new DeveloperError('radians is required.');
}
return radians * CesiumMath.DEGREES_PER_RADIAN;
};
/**
* Converts a longitude value, in radians, to the range [-Math.PI, Math.PI).
*
* @param {Number} angle The longitude value, in radians, to convert to the range [-Math.PI, Math.PI).
* @returns {Number} The equivalent longitude value in the range [-Math.PI, Math.PI).
*
* @example
* // Convert 270 degrees to -90 degrees longitude
* var longitude = Cesium.Math.convertLongitudeRange(Cesium.Math.toRadians(270.0));
*/
CesiumMath.convertLongitudeRange = function(angle) {
if (!defined(angle)) {
throw new DeveloperError('angle is required.');
}
var twoPi = CesiumMath.TWO_PI;
var simplified = angle - Math.floor(angle / twoPi) * twoPi;
if (simplified < -Math.PI) {
return simplified + twoPi;
}
if (simplified >= Math.PI) {
return simplified - twoPi;
}
return simplified;
};
/**
* Convenience function that clamps a latitude value, in radians, to the range [-Math.PI/2, Math.PI/2).
* Useful for sanitizing data before use in objects requiring correct range.
*
* @param {Number} angle The latitude value, in radians, to clamp to the range [-Math.PI/2, Math.PI/2).
* @returns {Number} The latitude value clamped to the range [-Math.PI/2, Math.PI/2).
*
* @example
* // Clamp 108 degrees latitude to 90 degrees latitude
* var latitude = Cesium.Math.clampToLatitudeRange(Cesium.Math.toRadians(108.0));
*/
CesiumMath.clampToLatitudeRange = function(angle) {
if (!defined(angle)) {
throw new DeveloperError('angle is required.');
}
return CesiumMath.clamp(angle, -1*CesiumMath.PI_OVER_TWO, CesiumMath.PI_OVER_TWO);
};
/**
* Produces an angle in the range -Pi <= angle <= Pi which is equivalent to the provided angle.
*
* @param {Number} angle in radians
* @returns {Number} The angle in the range [-CesiumMath.PI, CesiumMath.PI].
*/
CesiumMath.negativePiToPi = function(x) {
if (!defined(x)) {
throw new DeveloperError('x is required.');
}
return CesiumMath.zeroToTwoPi(x + CesiumMath.PI) - CesiumMath.PI;
};
/**
* Produces an angle in the range 0 <= angle <= 2Pi which is equivalent to the provided angle.
*
* @param {Number} angle in radians
* @returns {Number} The angle in the range [0, CesiumMath.TWO_PI].
*/
CesiumMath.zeroToTwoPi = function(x) {
if (!defined(x)) {
throw new DeveloperError('x is required.');
}
var mod = CesiumMath.mod(x, CesiumMath.TWO_PI);
if (Math.abs(mod) < CesiumMath.EPSILON14 && Math.abs(x) > CesiumMath.EPSILON14) {
return CesiumMath.TWO_PI;
}
return mod;
};
/**
* The modulo operation that also works for negative dividends.
*
* @param {Number} m The dividend.
* @param {Number} n The divisor.
* @returns {Number} The remainder.
*/
CesiumMath.mod = function(m, n) {
if (!defined(m)) {
throw new DeveloperError('m is required.');
}
if (!defined(n)) {
throw new DeveloperError('n is required.');
}
return ((m % n) + n) % n;
};
/**
* Determines if two values are equal using an absolute or relative tolerance test. This is useful
* to avoid problems due to roundoff error when comparing floating-point values directly. The values are
* first compared using an absolute tolerance test. If that fails, a relative tolerance test is performed.
* Use this test if you are unsure of the magnitudes of left and right.
*
* @param {Number} left The first value to compare.
* @param {Number} right The other value to compare.
* @param {Number} relativeEpsilon The maximum inclusive delta between left and right for the relative tolerance test.
* @param {Number} [absoluteEpsilon=relativeEpsilon] The maximum inclusive delta between left and right for the absolute tolerance test.
* @returns {Boolean} true if the values are equal within the epsilon; otherwise, false.
*
* @example
* var a = Cesium.Math.equalsEpsilon(0.0, 0.01, Cesium.Math.EPSILON2); // true
* var b = Cesium.Math.equalsEpsilon(0.0, 0.1, Cesium.Math.EPSILON2); // false
* var c = Cesium.Math.equalsEpsilon(3699175.1634344, 3699175.2, Cesium.Math.EPSILON7); // true
* var d = Cesium.Math.equalsEpsilon(3699175.1634344, 3699175.2, Cesium.Math.EPSILON9); // false
*/
CesiumMath.equalsEpsilon = function(left, right, relativeEpsilon, absoluteEpsilon) {
if (!defined(left)) {
throw new DeveloperError('left is required.');
}
if (!defined(right)) {
throw new DeveloperError('right is required.');
}
if (!defined(relativeEpsilon)) {
throw new DeveloperError('relativeEpsilon is required.');
}
absoluteEpsilon = defaultValue(absoluteEpsilon, relativeEpsilon);
var absDiff = Math.abs(left - right);
return absDiff <= absoluteEpsilon || absDiff <= relativeEpsilon * Math.max(Math.abs(left), Math.abs(right));
};
var factorials = [1];
/**
* Computes the factorial of the provided number.
*
* @param {Number} n The number whose factorial is to be computed.
* @returns {Number} The factorial of the provided number or undefined if the number is less than 0.
*
* @exception {DeveloperError} A number greater than or equal to 0 is required.
*
*
* @example
* //Compute 7!, which is equal to 5040
* var computedFactorial = Cesium.Math.factorial(7);
*
* @see {@link http://en.wikipedia.org/wiki/Factorial|Factorial on Wikipedia}
*/
CesiumMath.factorial = function(n) {
if (typeof n !== 'number' || n < 0) {
throw new DeveloperError('A number greater than or equal to 0 is required.');
}
var length = factorials.length;
if (n >= length) {
var sum = factorials[length - 1];
for (var i = length; i <= n; i++) {
factorials.push(sum * i);
}
}
return factorials[n];
};
/**
* Increments a number with a wrapping to a minimum value if the number exceeds the maximum value.
*
* @param {Number} [n] The number to be incremented.
* @param {Number} [maximumValue] The maximum incremented value before rolling over to the minimum value.
* @param {Number} [minimumValue=0.0] The number reset to after the maximum value has been exceeded.
* @returns {Number} The incremented number.
*
* @exception {DeveloperError} Maximum value must be greater than minimum value.
*
* @example
* var n = Cesium.Math.incrementWrap(5, 10, 0); // returns 6
* var n = Cesium.Math.incrementWrap(10, 10, 0); // returns 0
*/
CesiumMath.incrementWrap = function(n, maximumValue, minimumValue) {
minimumValue = defaultValue(minimumValue, 0.0);
if (!defined(n)) {
throw new DeveloperError('n is required.');
}
if (maximumValue <= minimumValue) {
throw new DeveloperError('maximumValue must be greater than minimumValue.');
}
++n;
if (n > maximumValue) {
n = minimumValue;
}
return n;
};
/**
* Determines if a positive integer is a power of two.
*
* @param {Number} n The positive integer to test.
* @returns {Boolean} true if the number if a power of two; otherwise, false.
*
* @exception {DeveloperError} A number greater than or equal to 0 is required.
*
* @example
* var t = Cesium.Math.isPowerOfTwo(16); // true
* var f = Cesium.Math.isPowerOfTwo(20); // false
*/
CesiumMath.isPowerOfTwo = function(n) {
if (typeof n !== 'number' || n < 0) {
throw new DeveloperError('A number greater than or equal to 0 is required.');
}
return (n !== 0) && ((n & (n - 1)) === 0);
};
/**
* Computes the next power-of-two integer greater than or equal to the provided positive integer.
*
* @param {Number} n The positive integer to test.
* @returns {Number} The next power-of-two integer.
*
* @exception {DeveloperError} A number greater than or equal to 0 is required.
*
* @example
* var n = Cesium.Math.nextPowerOfTwo(29); // 32
* var m = Cesium.Math.nextPowerOfTwo(32); // 32
*/
CesiumMath.nextPowerOfTwo = function(n) {
if (typeof n !== 'number' || n < 0) {
throw new DeveloperError('A number greater than or equal to 0 is required.');
}
// From http://graphics.stanford.edu/~seander/bithacks.html#RoundUpPowerOf2
--n;
n |= n >> 1;
n |= n >> 2;
n |= n >> 4;
n |= n >> 8;
n |= n >> 16;
++n;
return n;
};
/**
* Constraint a value to lie between two values.
*
* @param {Number} value The value to constrain.
* @param {Number} min The minimum value.
* @param {Number} max The maximum value.
* @returns {Number} The value clamped so that min <= value <= max.
*/
CesiumMath.clamp = function(value, min, max) {
if (!defined(value)) {
throw new DeveloperError('value is required');
}
if (!defined(min)) {
throw new DeveloperError('min is required.');
}
if (!defined(max)) {
throw new DeveloperError('max is required.');
}
return value < min ? min : value > max ? max : value;
};
var randomNumberGenerator = new MersenneTwister();
/**
* Sets the seed used by the random number generator
* in {@link CesiumMath#nextRandomNumber}.
*
* @param {Number} seed An integer used as the seed.
*/
CesiumMath.setRandomNumberSeed = function(seed) {
if (!defined(seed)) {
throw new DeveloperError('seed is required.');
}
randomNumberGenerator = new MersenneTwister(seed);
};
/**
* Generates a random number in the range of [0.0, 1.0)
* using a Mersenne twister.
*
* @returns {Number} A random number in the range of [0.0, 1.0).
*
* @see CesiumMath.setRandomNumberSeed
* @see {@link http://en.wikipedia.org/wiki/Mersenne_twister|Mersenne twister on Wikipedia}
*/
CesiumMath.nextRandomNumber = function() {
return randomNumberGenerator.random();
};
/**
* Computes Math.acos(value), but first clamps value to the range [-1.0, 1.0]
* so that the function will never return NaN.
*
* @param {Number} value The value for which to compute acos.
* @returns {Number} The acos of the value if the value is in the range [-1.0, 1.0], or the acos of -1.0 or 1.0,
* whichever is closer, if the value is outside the range.
*/
CesiumMath.acosClamped = function(value) {
if (!defined(value)) {
throw new DeveloperError('value is required.');
}
return Math.acos(CesiumMath.clamp(value, -1.0, 1.0));
};
/**
* Computes Math.asin(value), but first clamps value to the range [-1.0, 1.0]
* so that the function will never return NaN.
*
* @param {Number} value The value for which to compute asin.
* @returns {Number} The asin of the value if the value is in the range [-1.0, 1.0], or the asin of -1.0 or 1.0,
* whichever is closer, if the value is outside the range.
*/
CesiumMath.asinClamped = function(value) {
if (!defined(value)) {
throw new DeveloperError('value is required.');
}
return Math.asin(CesiumMath.clamp(value, -1.0, 1.0));
};
/**
* Finds the chord length between two points given the circle's radius and the angle between the points.
*
* @param {Number} angle The angle between the two points.
* @param {Number} radius The radius of the circle.
* @returns {Number} The chord length.
*/
CesiumMath.chordLength = function(angle, radius) {
if (!defined(angle)) {
throw new DeveloperError('angle is required.');
}
if (!defined(radius)) {
throw new DeveloperError('radius is required.');
}
return 2.0 * radius * Math.sin(angle * 0.5);
};
/**
* Finds the logarithm of a number to a base.
*
* @param {Number} number The number.
* @param {Number} base The base.
* @returns {Number} The result.
*/
CesiumMath.logBase = function(number, base) {
if (!defined(number)) {
throw new DeveloperError('number is required.');
}
if (!defined(base)) {
throw new DeveloperError('base is required.');
}
return Math.log(number) / Math.log(base);
};
/**
* @private
*/
CesiumMath.fog = function(distanceToCamera, density) {
var scalar = distanceToCamera * density;
return 1.0 - Math.exp(-(scalar * scalar));
};
return CesiumMath;
});
/*global define*/
define('Core/Cartesian3',[
'./Check',
'./defaultValue',
'./defined',
'./DeveloperError',
'./freezeObject',
'./Math'
], function(
Check,
defaultValue,
defined,
DeveloperError,
freezeObject,
CesiumMath) {
'use strict';
/**
* A 3D Cartesian point.
* @alias Cartesian3
* @constructor
*
* @param {Number} [x=0.0] The X component.
* @param {Number} [y=0.0] The Y component.
* @param {Number} [z=0.0] The Z component.
*
* @see Cartesian2
* @see Cartesian4
* @see Packable
*/
function Cartesian3(x, y, z) {
/**
* The X component.
* @type {Number}
* @default 0.0
*/
this.x = defaultValue(x, 0.0);
/**
* The Y component.
* @type {Number}
* @default 0.0
*/
this.y = defaultValue(y, 0.0);
/**
* The Z component.
* @type {Number}
* @default 0.0
*/
this.z = defaultValue(z, 0.0);
}
/**
* Converts the provided Spherical into Cartesian3 coordinates.
*
* @param {Spherical} spherical The Spherical to be converted to Cartesian3.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter or a new Cartesian3 instance if one was not provided.
*/
Cartesian3.fromSpherical = function(spherical, result) {
Check.typeOf.object(spherical, 'spherical');
if (!defined(result)) {
result = new Cartesian3();
}
var clock = spherical.clock;
var cone = spherical.cone;
var magnitude = defaultValue(spherical.magnitude, 1.0);
var radial = magnitude * Math.sin(cone);
result.x = radial * Math.cos(clock);
result.y = radial * Math.sin(clock);
result.z = magnitude * Math.cos(cone);
return result;
};
/**
* Creates a Cartesian3 instance from x, y and z coordinates.
*
* @param {Number} x The x coordinate.
* @param {Number} y The y coordinate.
* @param {Number} z The z coordinate.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter or a new Cartesian3 instance if one was not provided.
*/
Cartesian3.fromElements = function(x, y, z, result) {
if (!defined(result)) {
return new Cartesian3(x, y, z);
}
result.x = x;
result.y = y;
result.z = z;
return result;
};
/**
* Duplicates a Cartesian3 instance.
*
* @param {Cartesian3} cartesian The Cartesian to duplicate.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter or a new Cartesian3 instance if one was not provided. (Returns undefined if cartesian is undefined)
*/
Cartesian3.clone = function(cartesian, result) {
if (!defined(cartesian)) {
return undefined;
}
if (!defined(result)) {
return new Cartesian3(cartesian.x, cartesian.y, cartesian.z);
}
result.x = cartesian.x;
result.y = cartesian.y;
result.z = cartesian.z;
return result;
};
/**
* Creates a Cartesian3 instance from an existing Cartesian4. This simply takes the
* x, y, and z properties of the Cartesian4 and drops w.
* @function
*
* @param {Cartesian4} cartesian The Cartesian4 instance to create a Cartesian3 instance from.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter or a new Cartesian3 instance if one was not provided.
*/
Cartesian3.fromCartesian4 = Cartesian3.clone;
/**
* The number of elements used to pack the object into an array.
* @type {Number}
*/
Cartesian3.packedLength = 3;
/**
* Stores the provided instance into the provided array.
*
* @param {Cartesian3} value The value to pack.
* @param {Number[]} array The array to pack into.
* @param {Number} [startingIndex=0] The index into the array at which to start packing the elements.
*
* @returns {Number[]} The array that was packed into
*/
Cartesian3.pack = function(value, array, startingIndex) {
Check.typeOf.object(value, 'value');
Check.defined(array, 'array');
startingIndex = defaultValue(startingIndex, 0);
array[startingIndex++] = value.x;
array[startingIndex++] = value.y;
array[startingIndex] = value.z;
return array;
};
/**
* Retrieves an instance from a packed array.
*
* @param {Number[]} array The packed array.
* @param {Number} [startingIndex=0] The starting index of the element to be unpacked.
* @param {Cartesian3} [result] The object into which to store the result.
* @returns {Cartesian3} The modified result parameter or a new Cartesian3 instance if one was not provided.
*/
Cartesian3.unpack = function(array, startingIndex, result) {
Check.defined(array, 'array');
startingIndex = defaultValue(startingIndex, 0);
if (!defined(result)) {
result = new Cartesian3();
}
result.x = array[startingIndex++];
result.y = array[startingIndex++];
result.z = array[startingIndex];
return result;
};
/**
* Flattens an array of Cartesian3s into an array of components.
*
* @param {Cartesian3[]} array The array of cartesians to pack.
* @param {Number[]} result The array onto which to store the result.
* @returns {Number[]} The packed array.
*/
Cartesian3.packArray = function(array, result) {
Check.defined(array, 'array');
var length = array.length;
if (!defined(result)) {
result = new Array(length * 3);
} else {
result.length = length * 3;
}
for (var i = 0; i < length; ++i) {
Cartesian3.pack(array[i], result, i * 3);
}
return result;
};
/**
* Unpacks an array of cartesian components into an array of Cartesian3s.
*
* @param {Number[]} array The array of components to unpack.
* @param {Cartesian3[]} result The array onto which to store the result.
* @returns {Cartesian3[]} The unpacked array.
*/
Cartesian3.unpackArray = function(array, result) {
Check.defined(array, 'array');
Check.numeric.minimum(array.length, 3);
if (array.length % 3 !== 0) {
throw new DeveloperError('array length must be a multiple of 3.');
}
var length = array.length;
if (!defined(result)) {
result = new Array(length / 3);
} else {
result.length = length / 3;
}
for (var i = 0; i < length; i += 3) {
var index = i / 3;
result[index] = Cartesian3.unpack(array, i, result[index]);
}
return result;
};
/**
* Creates a Cartesian3 from three consecutive elements in an array.
* @function
*
* @param {Number[]} array The array whose three consecutive elements correspond to the x, y, and z components, respectively.
* @param {Number} [startingIndex=0] The offset into the array of the first element, which corresponds to the x component.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter or a new Cartesian3 instance if one was not provided.
*
* @example
* // Create a Cartesian3 with (1.0, 2.0, 3.0)
* var v = [1.0, 2.0, 3.0];
* var p = Cesium.Cartesian3.fromArray(v);
*
* // Create a Cartesian3 with (1.0, 2.0, 3.0) using an offset into an array
* var v2 = [0.0, 0.0, 1.0, 2.0, 3.0];
* var p2 = Cesium.Cartesian3.fromArray(v2, 2);
*/
Cartesian3.fromArray = Cartesian3.unpack;
/**
* Computes the value of the maximum component for the supplied Cartesian.
*
* @param {Cartesian3} cartesian The cartesian to use.
* @returns {Number} The value of the maximum component.
*/
Cartesian3.maximumComponent = function(cartesian) {
Check.typeOf.object(cartesian, 'cartesian');
return Math.max(cartesian.x, cartesian.y, cartesian.z);
};
/**
* Computes the value of the minimum component for the supplied Cartesian.
*
* @param {Cartesian3} cartesian The cartesian to use.
* @returns {Number} The value of the minimum component.
*/
Cartesian3.minimumComponent = function(cartesian) {
Check.typeOf.object(cartesian, 'cartesian');
return Math.min(cartesian.x, cartesian.y, cartesian.z);
};
/**
* Compares two Cartesians and computes a Cartesian which contains the minimum components of the supplied Cartesians.
*
* @param {Cartesian3} first A cartesian to compare.
* @param {Cartesian3} second A cartesian to compare.
* @param {Cartesian3} result The object into which to store the result.
* @returns {Cartesian3} A cartesian with the minimum components.
*/
Cartesian3.minimumByComponent = function(first, second, result) {
Check.typeOf.object(first, 'first');
Check.typeOf.object(second, 'second');
Check.typeOf.object(result, 'result');
result.x = Math.min(first.x, second.x);
result.y = Math.min(first.y, second.y);
result.z = Math.min(first.z, second.z);
return result;
};
/**
* Compares two Cartesians and computes a Cartesian which contains the maximum components of the supplied Cartesians.
*
* @param {Cartesian3} first A cartesian to compare.
* @param {Cartesian3} second A cartesian to compare.
* @param {Cartesian3} result The object into which to store the result.
* @returns {Cartesian3} A cartesian with the maximum components.
*/
Cartesian3.maximumByComponent = function(first, second, result) {
Check.typeOf.object(first, 'first');
Check.typeOf.object(second, 'second');
Check.typeOf.object(result, 'result');
result.x = Math.max(first.x, second.x);
result.y = Math.max(first.y, second.y);
result.z = Math.max(first.z, second.z);
return result;
};
/**
* Computes the provided Cartesian's squared magnitude.
*
* @param {Cartesian3} cartesian The Cartesian instance whose squared magnitude is to be computed.
* @returns {Number} The squared magnitude.
*/
Cartesian3.magnitudeSquared = function(cartesian) {
Check.typeOf.object(cartesian, 'cartesian');
return cartesian.x * cartesian.x + cartesian.y * cartesian.y + cartesian.z * cartesian.z;
};
/**
* Computes the Cartesian's magnitude (length).
*
* @param {Cartesian3} cartesian The Cartesian instance whose magnitude is to be computed.
* @returns {Number} The magnitude.
*/
Cartesian3.magnitude = function(cartesian) {
return Math.sqrt(Cartesian3.magnitudeSquared(cartesian));
};
var distanceScratch = new Cartesian3();
/**
* Computes the distance between two points.
*
* @param {Cartesian3} left The first point to compute the distance from.
* @param {Cartesian3} right The second point to compute the distance to.
* @returns {Number} The distance between two points.
*
* @example
* // Returns 1.0
* var d = Cesium.Cartesian3.distance(new Cesium.Cartesian3(1.0, 0.0, 0.0), new Cesium.Cartesian3(2.0, 0.0, 0.0));
*/
Cartesian3.distance = function(left, right) {
Check.typeOf.object(left, 'left');
Check.typeOf.object(right, 'right');
Cartesian3.subtract(left, right, distanceScratch);
return Cartesian3.magnitude(distanceScratch);
};
/**
* Computes the squared distance between two points. Comparing squared distances
* using this function is more efficient than comparing distances using {@link Cartesian3#distance}.
*
* @param {Cartesian3} left The first point to compute the distance from.
* @param {Cartesian3} right The second point to compute the distance to.
* @returns {Number} The distance between two points.
*
* @example
* // Returns 4.0, not 2.0
* var d = Cesium.Cartesian3.distanceSquared(new Cesium.Cartesian3(1.0, 0.0, 0.0), new Cesium.Cartesian3(3.0, 0.0, 0.0));
*/
Cartesian3.distanceSquared = function(left, right) {
Check.typeOf.object(left, 'left');
Check.typeOf.object(right, 'right');
Cartesian3.subtract(left, right, distanceScratch);
return Cartesian3.magnitudeSquared(distanceScratch);
};
/**
* Computes the normalized form of the supplied Cartesian.
*
* @param {Cartesian3} cartesian The Cartesian to be normalized.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Cartesian3.normalize = function(cartesian, result) {
Check.typeOf.object(cartesian, 'cartesian');
Check.typeOf.object(result, 'result');
var magnitude = Cartesian3.magnitude(cartesian);
result.x = cartesian.x / magnitude;
result.y = cartesian.y / magnitude;
result.z = cartesian.z / magnitude;
if (isNaN(result.x) || isNaN(result.y) || isNaN(result.z)) {
throw new DeveloperError('normalized result is not a number');
}
return result;
};
/**
* Computes the dot (scalar) product of two Cartesians.
*
* @param {Cartesian3} left The first Cartesian.
* @param {Cartesian3} right The second Cartesian.
* @returns {Number} The dot product.
*/
Cartesian3.dot = function(left, right) {
Check.typeOf.object(left, 'left');
Check.typeOf.object(right, 'right');
return left.x * right.x + left.y * right.y + left.z * right.z;
};
/**
* Computes the componentwise product of two Cartesians.
*
* @param {Cartesian3} left The first Cartesian.
* @param {Cartesian3} right The second Cartesian.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Cartesian3.multiplyComponents = function(left, right, result) {
Check.typeOf.object(left, 'left');
Check.typeOf.object(right, 'right');
Check.typeOf.object(result, 'result');
result.x = left.x * right.x;
result.y = left.y * right.y;
result.z = left.z * right.z;
return result;
};
/**
* Computes the componentwise quotient of two Cartesians.
*
* @param {Cartesian3} left The first Cartesian.
* @param {Cartesian3} right The second Cartesian.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Cartesian3.divideComponents = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = left.x / right.x;
result.y = left.y / right.y;
result.z = left.z / right.z;
return result;
};
/**
* Computes the componentwise sum of two Cartesians.
*
* @param {Cartesian3} left The first Cartesian.
* @param {Cartesian3} right The second Cartesian.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Cartesian3.add = function(left, right, result) {
Check.typeOf.object(left, 'left');
Check.typeOf.object(right, 'right');
Check.typeOf.object(result, 'result');
result.x = left.x + right.x;
result.y = left.y + right.y;
result.z = left.z + right.z;
return result;
};
/**
* Computes the componentwise difference of two Cartesians.
*
* @param {Cartesian3} left The first Cartesian.
* @param {Cartesian3} right The second Cartesian.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Cartesian3.subtract = function(left, right, result) {
Check.typeOf.object(left, 'left');
Check.typeOf.object(right, 'right');
Check.typeOf.object(result, 'result');
result.x = left.x - right.x;
result.y = left.y - right.y;
result.z = left.z - right.z;
return result;
};
/**
* Multiplies the provided Cartesian componentwise by the provided scalar.
*
* @param {Cartesian3} cartesian The Cartesian to be scaled.
* @param {Number} scalar The scalar to multiply with.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Cartesian3.multiplyByScalar = function(cartesian, scalar, result) {
Check.typeOf.object(cartesian, 'cartesian');
Check.typeOf.number(scalar, 'scalar');
Check.typeOf.object(result, 'result');
result.x = cartesian.x * scalar;
result.y = cartesian.y * scalar;
result.z = cartesian.z * scalar;
return result;
};
/**
* Divides the provided Cartesian componentwise by the provided scalar.
*
* @param {Cartesian3} cartesian The Cartesian to be divided.
* @param {Number} scalar The scalar to divide by.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Cartesian3.divideByScalar = function(cartesian, scalar, result) {
Check.typeOf.object(cartesian, 'cartesian');
Check.typeOf.number(scalar, 'scalar');
Check.typeOf.object(result, 'result');
result.x = cartesian.x / scalar;
result.y = cartesian.y / scalar;
result.z = cartesian.z / scalar;
return result;
};
/**
* Negates the provided Cartesian.
*
* @param {Cartesian3} cartesian The Cartesian to be negated.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Cartesian3.negate = function(cartesian, result) {
Check.typeOf.object(cartesian, 'cartesian');
Check.typeOf.object(result, 'result');
result.x = -cartesian.x;
result.y = -cartesian.y;
result.z = -cartesian.z;
return result;
};
/**
* Computes the absolute value of the provided Cartesian.
*
* @param {Cartesian3} cartesian The Cartesian whose absolute value is to be computed.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Cartesian3.abs = function(cartesian, result) {
Check.typeOf.object(cartesian, 'cartesian');
Check.typeOf.object(result, 'result');
result.x = Math.abs(cartesian.x);
result.y = Math.abs(cartesian.y);
result.z = Math.abs(cartesian.z);
return result;
};
var lerpScratch = new Cartesian3();
/**
* Computes the linear interpolation or extrapolation at t using the provided cartesians.
*
* @param {Cartesian3} start The value corresponding to t at 0.0.
* @param {Cartesian3} end The value corresponding to t at 1.0.
* @param {Number} t The point along t at which to interpolate.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Cartesian3.lerp = function(start, end, t, result) {
Check.typeOf.object(start, 'start');
Check.typeOf.object(end, 'end');
Check.typeOf.number(t, 't');
Check.typeOf.object(result, 'result');
Cartesian3.multiplyByScalar(end, t, lerpScratch);
result = Cartesian3.multiplyByScalar(start, 1.0 - t, result);
return Cartesian3.add(lerpScratch, result, result);
};
var angleBetweenScratch = new Cartesian3();
var angleBetweenScratch2 = new Cartesian3();
/**
* Returns the angle, in radians, between the provided Cartesians.
*
* @param {Cartesian3} left The first Cartesian.
* @param {Cartesian3} right The second Cartesian.
* @returns {Number} The angle between the Cartesians.
*/
Cartesian3.angleBetween = function(left, right) {
Check.typeOf.object(left, 'left');
Check.typeOf.object(right, 'right');
Cartesian3.normalize(left, angleBetweenScratch);
Cartesian3.normalize(right, angleBetweenScratch2);
var cosine = Cartesian3.dot(angleBetweenScratch, angleBetweenScratch2);
var sine = Cartesian3.magnitude(Cartesian3.cross(angleBetweenScratch, angleBetweenScratch2, angleBetweenScratch));
return Math.atan2(sine, cosine);
};
var mostOrthogonalAxisScratch = new Cartesian3();
/**
* Returns the axis that is most orthogonal to the provided Cartesian.
*
* @param {Cartesian3} cartesian The Cartesian on which to find the most orthogonal axis.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The most orthogonal axis.
*/
Cartesian3.mostOrthogonalAxis = function(cartesian, result) {
Check.typeOf.object(cartesian, 'cartesian');
Check.typeOf.object(result, 'result');
var f = Cartesian3.normalize(cartesian, mostOrthogonalAxisScratch);
Cartesian3.abs(f, f);
if (f.x <= f.y) {
if (f.x <= f.z) {
result = Cartesian3.clone(Cartesian3.UNIT_X, result);
} else {
result = Cartesian3.clone(Cartesian3.UNIT_Z, result);
}
} else {
if (f.y <= f.z) {
result = Cartesian3.clone(Cartesian3.UNIT_Y, result);
} else {
result = Cartesian3.clone(Cartesian3.UNIT_Z, result);
}
}
return result;
};
/**
* Compares the provided Cartesians componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Cartesian3} [left] The first Cartesian.
* @param {Cartesian3} [right] The second Cartesian.
* @returns {Boolean} true if left and right are equal, false otherwise.
*/
Cartesian3.equals = function(left, right) {
return (left === right) ||
((defined(left)) &&
(defined(right)) &&
(left.x === right.x) &&
(left.y === right.y) &&
(left.z === right.z));
};
/**
* @private
*/
Cartesian3.equalsArray = function(cartesian, array, offset) {
return cartesian.x === array[offset] &&
cartesian.y === array[offset + 1] &&
cartesian.z === array[offset + 2];
};
/**
* Compares the provided Cartesians componentwise and returns
* true if they pass an absolute or relative tolerance test,
* false otherwise.
*
* @param {Cartesian3} [left] The first Cartesian.
* @param {Cartesian3} [right] The second Cartesian.
* @param {Number} relativeEpsilon The relative epsilon tolerance to use for equality testing.
* @param {Number} [absoluteEpsilon=relativeEpsilon] The absolute epsilon tolerance to use for equality testing.
* @returns {Boolean} true if left and right are within the provided epsilon, false otherwise.
*/
Cartesian3.equalsEpsilon = function(left, right, relativeEpsilon, absoluteEpsilon) {
return (left === right) ||
(defined(left) &&
defined(right) &&
CesiumMath.equalsEpsilon(left.x, right.x, relativeEpsilon, absoluteEpsilon) &&
CesiumMath.equalsEpsilon(left.y, right.y, relativeEpsilon, absoluteEpsilon) &&
CesiumMath.equalsEpsilon(left.z, right.z, relativeEpsilon, absoluteEpsilon));
};
/**
* Computes the cross (outer) product of two Cartesians.
*
* @param {Cartesian3} left The first Cartesian.
* @param {Cartesian3} right The second Cartesian.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The cross product.
*/
Cartesian3.cross = function(left, right, result) {
Check.typeOf.object(left, 'left');
Check.typeOf.object(right, 'right');
Check.typeOf.object(result, 'result');
var leftX = left.x;
var leftY = left.y;
var leftZ = left.z;
var rightX = right.x;
var rightY = right.y;
var rightZ = right.z;
var x = leftY * rightZ - leftZ * rightY;
var y = leftZ * rightX - leftX * rightZ;
var z = leftX * rightY - leftY * rightX;
result.x = x;
result.y = y;
result.z = z;
return result;
};
/**
* Returns a Cartesian3 position from longitude and latitude values given in degrees.
*
* @param {Number} longitude The longitude, in degrees
* @param {Number} latitude The latitude, in degrees
* @param {Number} [height=0.0] The height, in meters, above the ellipsoid.
* @param {Ellipsoid} [ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the position lies.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The position
*
* @example
* var position = Cesium.Cartesian3.fromDegrees(-115.0, 37.0);
*/
Cartesian3.fromDegrees = function(longitude, latitude, height, ellipsoid, result) {
Check.typeOf.number(longitude, 'longitude');
Check.typeOf.number(latitude, 'latitude');
longitude = CesiumMath.toRadians(longitude);
latitude = CesiumMath.toRadians(latitude);
return Cartesian3.fromRadians(longitude, latitude, height, ellipsoid, result);
};
var scratchN = new Cartesian3();
var scratchK = new Cartesian3();
var wgs84RadiiSquared = new Cartesian3(6378137.0 * 6378137.0, 6378137.0 * 6378137.0, 6356752.3142451793 * 6356752.3142451793);
/**
* Returns a Cartesian3 position from longitude and latitude values given in radians.
*
* @param {Number} longitude The longitude, in radians
* @param {Number} latitude The latitude, in radians
* @param {Number} [height=0.0] The height, in meters, above the ellipsoid.
* @param {Ellipsoid} [ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the position lies.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The position
*
* @example
* var position = Cesium.Cartesian3.fromRadians(-2.007, 0.645);
*/
Cartesian3.fromRadians = function(longitude, latitude, height, ellipsoid, result) {
Check.typeOf.number(longitude, 'longitude');
Check.typeOf.number(latitude, 'latitude');
height = defaultValue(height, 0.0);
var radiiSquared = defined(ellipsoid) ? ellipsoid.radiiSquared : wgs84RadiiSquared;
var cosLatitude = Math.cos(latitude);
scratchN.x = cosLatitude * Math.cos(longitude);
scratchN.y = cosLatitude * Math.sin(longitude);
scratchN.z = Math.sin(latitude);
scratchN = Cartesian3.normalize(scratchN, scratchN);
Cartesian3.multiplyComponents(radiiSquared, scratchN, scratchK);
var gamma = Math.sqrt(Cartesian3.dot(scratchN, scratchK));
scratchK = Cartesian3.divideByScalar(scratchK, gamma, scratchK);
scratchN = Cartesian3.multiplyByScalar(scratchN, height, scratchN);
if (!defined(result)) {
result = new Cartesian3();
}
return Cartesian3.add(scratchK, scratchN, result);
};
/**
* Returns an array of Cartesian3 positions given an array of longitude and latitude values given in degrees.
*
* @param {Number[]} coordinates A list of longitude and latitude values. Values alternate [longitude, latitude, longitude, latitude...].
* @param {Ellipsoid} [ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the coordinates lie.
* @param {Cartesian3[]} [result] An array of Cartesian3 objects to store the result.
* @returns {Cartesian3[]} The array of positions.
*
* @example
* var positions = Cesium.Cartesian3.fromDegreesArray([-115.0, 37.0, -107.0, 33.0]);
*/
Cartesian3.fromDegreesArray = function(coordinates, ellipsoid, result) {
Check.defined(coordinates, 'coordinates');
if (coordinates.length < 2 || coordinates.length % 2 !== 0) {
throw new DeveloperError('the number of coordinates must be a multiple of 2 and at least 2');
}
var length = coordinates.length;
if (!defined(result)) {
result = new Array(length / 2);
} else {
result.length = length / 2;
}
for (var i = 0; i < length; i += 2) {
var longitude = coordinates[i];
var latitude = coordinates[i + 1];
var index = i / 2;
result[index] = Cartesian3.fromDegrees(longitude, latitude, 0, ellipsoid, result[index]);
}
return result;
};
/**
* Returns an array of Cartesian3 positions given an array of longitude and latitude values given in radians.
*
* @param {Number[]} coordinates A list of longitude and latitude values. Values alternate [longitude, latitude, longitude, latitude...].
* @param {Ellipsoid} [ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the coordinates lie.
* @param {Cartesian3[]} [result] An array of Cartesian3 objects to store the result.
* @returns {Cartesian3[]} The array of positions.
*
* @example
* var positions = Cesium.Cartesian3.fromRadiansArray([-2.007, 0.645, -1.867, .575]);
*/
Cartesian3.fromRadiansArray = function(coordinates, ellipsoid, result) {
Check.defined(coordinates, 'coordinates');
if (coordinates.length < 2 || coordinates.length % 2 !== 0) {
throw new DeveloperError('the number of coordinates must be a multiple of 2 and at least 2');
}
var length = coordinates.length;
if (!defined(result)) {
result = new Array(length / 2);
} else {
result.length = length / 2;
}
for (var i = 0; i < length; i += 2) {
var longitude = coordinates[i];
var latitude = coordinates[i + 1];
var index = i / 2;
result[index] = Cartesian3.fromRadians(longitude, latitude, 0, ellipsoid, result[index]);
}
return result;
};
/**
* Returns an array of Cartesian3 positions given an array of longitude, latitude and height values where longitude and latitude are given in degrees.
*
* @param {Number[]} coordinates A list of longitude, latitude and height values. Values alternate [longitude, latitude, height, longitude, latitude, height...].
* @param {Ellipsoid} [ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the position lies.
* @param {Cartesian3[]} [result] An array of Cartesian3 objects to store the result.
* @returns {Cartesian3[]} The array of positions.
*
* @example
* var positions = Cesium.Cartesian3.fromDegreesArrayHeights([-115.0, 37.0, 100000.0, -107.0, 33.0, 150000.0]);
*/
Cartesian3.fromDegreesArrayHeights = function(coordinates, ellipsoid, result) {
Check.defined(coordinates, 'coordinates');
if (coordinates.length < 3 || coordinates.length % 3 !== 0) {
throw new DeveloperError('the number of coordinates must be a multiple of 3 and at least 3');
}
var length = coordinates.length;
if (!defined(result)) {
result = new Array(length / 3);
} else {
result.length = length / 3;
}
for (var i = 0; i < length; i += 3) {
var longitude = coordinates[i];
var latitude = coordinates[i + 1];
var height = coordinates[i + 2];
var index = i / 3;
result[index] = Cartesian3.fromDegrees(longitude, latitude, height, ellipsoid, result[index]);
}
return result;
};
/**
* Returns an array of Cartesian3 positions given an array of longitude, latitude and height values where longitude and latitude are given in radians.
*
* @param {Number[]} coordinates A list of longitude, latitude and height values. Values alternate [longitude, latitude, height, longitude, latitude, height...].
* @param {Ellipsoid} [ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the position lies.
* @param {Cartesian3[]} [result] An array of Cartesian3 objects to store the result.
* @returns {Cartesian3[]} The array of positions.
*
* @example
* var positions = Cesium.Cartesian3.fromRadiansArrayHeights([-2.007, 0.645, 100000.0, -1.867, .575, 150000.0]);
*/
Cartesian3.fromRadiansArrayHeights = function(coordinates, ellipsoid, result) {
Check.defined(coordinates, 'coordinates');
if (coordinates.length < 3 || coordinates.length % 3 !== 0) {
throw new DeveloperError('the number of coordinates must be a multiple of 3 and at least 3');
}
var length = coordinates.length;
if (!defined(result)) {
result = new Array(length / 3);
} else {
result.length = length / 3;
}
for (var i = 0; i < length; i += 3) {
var longitude = coordinates[i];
var latitude = coordinates[i + 1];
var height = coordinates[i + 2];
var index = i / 3;
result[index] = Cartesian3.fromRadians(longitude, latitude, height, ellipsoid, result[index]);
}
return result;
};
/**
* An immutable Cartesian3 instance initialized to (0.0, 0.0, 0.0).
*
* @type {Cartesian3}
* @constant
*/
Cartesian3.ZERO = freezeObject(new Cartesian3(0.0, 0.0, 0.0));
/**
* An immutable Cartesian3 instance initialized to (1.0, 0.0, 0.0).
*
* @type {Cartesian3}
* @constant
*/
Cartesian3.UNIT_X = freezeObject(new Cartesian3(1.0, 0.0, 0.0));
/**
* An immutable Cartesian3 instance initialized to (0.0, 1.0, 0.0).
*
* @type {Cartesian3}
* @constant
*/
Cartesian3.UNIT_Y = freezeObject(new Cartesian3(0.0, 1.0, 0.0));
/**
* An immutable Cartesian3 instance initialized to (0.0, 0.0, 1.0).
*
* @type {Cartesian3}
* @constant
*/
Cartesian3.UNIT_Z = freezeObject(new Cartesian3(0.0, 0.0, 1.0));
/**
* Duplicates this Cartesian3 instance.
*
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter or a new Cartesian3 instance if one was not provided.
*/
Cartesian3.prototype.clone = function(result) {
return Cartesian3.clone(this, result);
};
/**
* Compares this Cartesian against the provided Cartesian componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Cartesian3} [right] The right hand side Cartesian.
* @returns {Boolean} true if they are equal, false otherwise.
*/
Cartesian3.prototype.equals = function(right) {
return Cartesian3.equals(this, right);
};
/**
* Compares this Cartesian against the provided Cartesian componentwise and returns
* true if they pass an absolute or relative tolerance test,
* false otherwise.
*
* @param {Cartesian3} [right] The right hand side Cartesian.
* @param {Number} relativeEpsilon The relative epsilon tolerance to use for equality testing.
* @param {Number} [absoluteEpsilon=relativeEpsilon] The absolute epsilon tolerance to use for equality testing.
* @returns {Boolean} true if they are within the provided epsilon, false otherwise.
*/
Cartesian3.prototype.equalsEpsilon = function(right, relativeEpsilon, absoluteEpsilon) {
return Cartesian3.equalsEpsilon(this, right, relativeEpsilon, absoluteEpsilon);
};
/**
* Creates a string representing this Cartesian in the format '(x, y, z)'.
*
* @returns {String} A string representing this Cartesian in the format '(x, y, z)'.
*/
Cartesian3.prototype.toString = function() {
return '(' + this.x + ', ' + this.y + ', ' + this.z + ')';
};
return Cartesian3;
});
/*global define*/
define('Core/scaleToGeodeticSurface',[
'./Cartesian3',
'./defined',
'./DeveloperError',
'./Math'
], function(
Cartesian3,
defined,
DeveloperError,
CesiumMath) {
'use strict';
var scaleToGeodeticSurfaceIntersection = new Cartesian3();
var scaleToGeodeticSurfaceGradient = new Cartesian3();
/**
* Scales the provided Cartesian position along the geodetic surface normal
* so that it is on the surface of this ellipsoid. If the position is
* at the center of the ellipsoid, this function returns undefined.
*
* @param {Cartesian3} cartesian The Cartesian position to scale.
* @param {Cartesian3} oneOverRadii One over radii of the ellipsoid.
* @param {Cartesian3} oneOverRadiiSquared One over radii squared of the ellipsoid.
* @param {Number} centerToleranceSquared Tolerance for closeness to the center.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter, a new Cartesian3 instance if none was provided, or undefined if the position is at the center.
*
* @exports scaleToGeodeticSurface
*
* @private
*/
function scaleToGeodeticSurface(cartesian, oneOverRadii, oneOverRadiiSquared, centerToleranceSquared, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required.');
}
if (!defined(oneOverRadii)) {
throw new DeveloperError('oneOverRadii is required.');
}
if (!defined(oneOverRadiiSquared)) {
throw new DeveloperError('oneOverRadiiSquared is required.');
}
if (!defined(centerToleranceSquared)) {
throw new DeveloperError('centerToleranceSquared is required.');
}
var positionX = cartesian.x;
var positionY = cartesian.y;
var positionZ = cartesian.z;
var oneOverRadiiX = oneOverRadii.x;
var oneOverRadiiY = oneOverRadii.y;
var oneOverRadiiZ = oneOverRadii.z;
var x2 = positionX * positionX * oneOverRadiiX * oneOverRadiiX;
var y2 = positionY * positionY * oneOverRadiiY * oneOverRadiiY;
var z2 = positionZ * positionZ * oneOverRadiiZ * oneOverRadiiZ;
// Compute the squared ellipsoid norm.
var squaredNorm = x2 + y2 + z2;
var ratio = Math.sqrt(1.0 / squaredNorm);
// As an initial approximation, assume that the radial intersection is the projection point.
var intersection = Cartesian3.multiplyByScalar(cartesian, ratio, scaleToGeodeticSurfaceIntersection);
// If the position is near the center, the iteration will not converge.
if (squaredNorm < centerToleranceSquared) {
return !isFinite(ratio) ? undefined : Cartesian3.clone(intersection, result);
}
var oneOverRadiiSquaredX = oneOverRadiiSquared.x;
var oneOverRadiiSquaredY = oneOverRadiiSquared.y;
var oneOverRadiiSquaredZ = oneOverRadiiSquared.z;
// Use the gradient at the intersection point in place of the true unit normal.
// The difference in magnitude will be absorbed in the multiplier.
var gradient = scaleToGeodeticSurfaceGradient;
gradient.x = intersection.x * oneOverRadiiSquaredX * 2.0;
gradient.y = intersection.y * oneOverRadiiSquaredY * 2.0;
gradient.z = intersection.z * oneOverRadiiSquaredZ * 2.0;
// Compute the initial guess at the normal vector multiplier, lambda.
var lambda = (1.0 - ratio) * Cartesian3.magnitude(cartesian) / (0.5 * Cartesian3.magnitude(gradient));
var correction = 0.0;
var func;
var denominator;
var xMultiplier;
var yMultiplier;
var zMultiplier;
var xMultiplier2;
var yMultiplier2;
var zMultiplier2;
var xMultiplier3;
var yMultiplier3;
var zMultiplier3;
do {
lambda -= correction;
xMultiplier = 1.0 / (1.0 + lambda * oneOverRadiiSquaredX);
yMultiplier = 1.0 / (1.0 + lambda * oneOverRadiiSquaredY);
zMultiplier = 1.0 / (1.0 + lambda * oneOverRadiiSquaredZ);
xMultiplier2 = xMultiplier * xMultiplier;
yMultiplier2 = yMultiplier * yMultiplier;
zMultiplier2 = zMultiplier * zMultiplier;
xMultiplier3 = xMultiplier2 * xMultiplier;
yMultiplier3 = yMultiplier2 * yMultiplier;
zMultiplier3 = zMultiplier2 * zMultiplier;
func = x2 * xMultiplier2 + y2 * yMultiplier2 + z2 * zMultiplier2 - 1.0;
// "denominator" here refers to the use of this expression in the velocity and acceleration
// computations in the sections to follow.
denominator = x2 * xMultiplier3 * oneOverRadiiSquaredX + y2 * yMultiplier3 * oneOverRadiiSquaredY + z2 * zMultiplier3 * oneOverRadiiSquaredZ;
var derivative = -2.0 * denominator;
correction = func / derivative;
} while (Math.abs(func) > CesiumMath.EPSILON12);
if (!defined(result)) {
return new Cartesian3(positionX * xMultiplier, positionY * yMultiplier, positionZ * zMultiplier);
}
result.x = positionX * xMultiplier;
result.y = positionY * yMultiplier;
result.z = positionZ * zMultiplier;
return result;
}
return scaleToGeodeticSurface;
});
/*global define*/
define('Core/Cartographic',[
'./Cartesian3',
'./defaultValue',
'./defined',
'./DeveloperError',
'./freezeObject',
'./Math',
'./scaleToGeodeticSurface'
], function(
Cartesian3,
defaultValue,
defined,
DeveloperError,
freezeObject,
CesiumMath,
scaleToGeodeticSurface) {
'use strict';
/**
* A position defined by longitude, latitude, and height.
* @alias Cartographic
* @constructor
*
* @param {Number} [longitude=0.0] The longitude, in radians.
* @param {Number} [latitude=0.0] The latitude, in radians.
* @param {Number} [height=0.0] The height, in meters, above the ellipsoid.
*
* @see Ellipsoid
*/
function Cartographic(longitude, latitude, height) {
/**
* The longitude, in radians.
* @type {Number}
* @default 0.0
*/
this.longitude = defaultValue(longitude, 0.0);
/**
* The latitude, in radians.
* @type {Number}
* @default 0.0
*/
this.latitude = defaultValue(latitude, 0.0);
/**
* The height, in meters, above the ellipsoid.
* @type {Number}
* @default 0.0
*/
this.height = defaultValue(height, 0.0);
}
/**
* Creates a new Cartographic instance from longitude and latitude
* specified in radians.
*
* @param {Number} longitude The longitude, in radians.
* @param {Number} latitude The latitude, in radians.
* @param {Number} [height=0.0] The height, in meters, above the ellipsoid.
* @param {Cartographic} [result] The object onto which to store the result.
* @returns {Cartographic} The modified result parameter or a new Cartographic instance if one was not provided.
*/
Cartographic.fromRadians = function(longitude, latitude, height, result) {
if (!defined(longitude)) {
throw new DeveloperError('longitude is required.');
}
if (!defined(latitude)) {
throw new DeveloperError('latitude is required.');
}
height = defaultValue(height, 0.0);
if (!defined(result)) {
return new Cartographic(longitude, latitude, height);
}
result.longitude = longitude;
result.latitude = latitude;
result.height = height;
return result;
};
/**
* Creates a new Cartographic instance from longitude and latitude
* specified in degrees. The values in the resulting object will
* be in radians.
*
* @param {Number} longitude The longitude, in degrees.
* @param {Number} latitude The latitude, in degrees.
* @param {Number} [height=0.0] The height, in meters, above the ellipsoid.
* @param {Cartographic} [result] The object onto which to store the result.
* @returns {Cartographic} The modified result parameter or a new Cartographic instance if one was not provided.
*/
Cartographic.fromDegrees = function(longitude, latitude, height, result) {
if (!defined(longitude)) {
throw new DeveloperError('longitude is required.');
}
if (!defined(latitude)) {
throw new DeveloperError('latitude is required.');
}
longitude = CesiumMath.toRadians(longitude);
latitude = CesiumMath.toRadians(latitude);
return Cartographic.fromRadians(longitude, latitude, height, result);
};
var cartesianToCartographicN = new Cartesian3();
var cartesianToCartographicP = new Cartesian3();
var cartesianToCartographicH = new Cartesian3();
var wgs84OneOverRadii = new Cartesian3(1.0 / 6378137.0, 1.0 / 6378137.0, 1.0 / 6356752.3142451793);
var wgs84OneOverRadiiSquared = new Cartesian3(1.0 / (6378137.0 * 6378137.0), 1.0 / (6378137.0 * 6378137.0), 1.0 / (6356752.3142451793 * 6356752.3142451793));
var wgs84CenterToleranceSquared = CesiumMath.EPSILON1;
/**
* Creates a new Cartographic instance from a Cartesian position. The values in the
* resulting object will be in radians.
*
* @param {Cartesian3} cartesian The Cartesian position to convert to cartographic representation.
* @param {Ellipsoid} [ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the position lies.
* @param {Cartographic} [result] The object onto which to store the result.
* @returns {Cartographic} The modified result parameter, new Cartographic instance if none was provided, or undefined if the cartesian is at the center of the ellipsoid.
*/
Cartographic.fromCartesian = function(cartesian, ellipsoid, result) {
var oneOverRadii = defined(ellipsoid) ? ellipsoid.oneOverRadii : wgs84OneOverRadii;
var oneOverRadiiSquared = defined(ellipsoid) ? ellipsoid.oneOverRadiiSquared : wgs84OneOverRadiiSquared;
var centerToleranceSquared = defined(ellipsoid) ? ellipsoid._centerToleranceSquared : wgs84CenterToleranceSquared;
//`cartesian is required.` is thrown from scaleToGeodeticSurface
var p = scaleToGeodeticSurface(cartesian, oneOverRadii, oneOverRadiiSquared, centerToleranceSquared, cartesianToCartographicP);
if (!defined(p)) {
return undefined;
}
var n = Cartesian3.multiplyComponents(p, oneOverRadiiSquared, cartesianToCartographicN);
n = Cartesian3.normalize(n, n);
var h = Cartesian3.subtract(cartesian, p, cartesianToCartographicH);
var longitude = Math.atan2(n.y, n.x);
var latitude = Math.asin(n.z);
var height = CesiumMath.sign(Cartesian3.dot(h, cartesian)) * Cartesian3.magnitude(h);
if (!defined(result)) {
return new Cartographic(longitude, latitude, height);
}
result.longitude = longitude;
result.latitude = latitude;
result.height = height;
return result;
};
/**
* Duplicates a Cartographic instance.
*
* @param {Cartographic} cartographic The cartographic to duplicate.
* @param {Cartographic} [result] The object onto which to store the result.
* @returns {Cartographic} The modified result parameter or a new Cartographic instance if one was not provided. (Returns undefined if cartographic is undefined)
*/
Cartographic.clone = function(cartographic, result) {
if (!defined(cartographic)) {
return undefined;
}
if (!defined(result)) {
return new Cartographic(cartographic.longitude, cartographic.latitude, cartographic.height);
}
result.longitude = cartographic.longitude;
result.latitude = cartographic.latitude;
result.height = cartographic.height;
return result;
};
/**
* Compares the provided cartographics componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Cartographic} [left] The first cartographic.
* @param {Cartographic} [right] The second cartographic.
* @returns {Boolean} true if left and right are equal, false otherwise.
*/
Cartographic.equals = function(left, right) {
return (left === right) ||
((defined(left)) &&
(defined(right)) &&
(left.longitude === right.longitude) &&
(left.latitude === right.latitude) &&
(left.height === right.height));
};
/**
* Compares the provided cartographics componentwise and returns
* true if they are within the provided epsilon,
* false otherwise.
*
* @param {Cartographic} [left] The first cartographic.
* @param {Cartographic} [right] The second cartographic.
* @param {Number} epsilon The epsilon to use for equality testing.
* @returns {Boolean} true if left and right are within the provided epsilon, false otherwise.
*/
Cartographic.equalsEpsilon = function(left, right, epsilon) {
if (typeof epsilon !== 'number') {
throw new DeveloperError('epsilon is required and must be a number.');
}
return (left === right) ||
((defined(left)) &&
(defined(right)) &&
(Math.abs(left.longitude - right.longitude) <= epsilon) &&
(Math.abs(left.latitude - right.latitude) <= epsilon) &&
(Math.abs(left.height - right.height) <= epsilon));
};
/**
* An immutable Cartographic instance initialized to (0.0, 0.0, 0.0).
*
* @type {Cartographic}
* @constant
*/
Cartographic.ZERO = freezeObject(new Cartographic(0.0, 0.0, 0.0));
/**
* Duplicates this instance.
*
* @param {Cartographic} [result] The object onto which to store the result.
* @returns {Cartographic} The modified result parameter or a new Cartographic instance if one was not provided.
*/
Cartographic.prototype.clone = function(result) {
return Cartographic.clone(this, result);
};
/**
* Compares the provided against this cartographic componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Cartographic} [right] The second cartographic.
* @returns {Boolean} true if left and right are equal, false otherwise.
*/
Cartographic.prototype.equals = function(right) {
return Cartographic.equals(this, right);
};
/**
* Compares the provided against this cartographic componentwise and returns
* true if they are within the provided epsilon,
* false otherwise.
*
* @param {Cartographic} [right] The second cartographic.
* @param {Number} epsilon The epsilon to use for equality testing.
* @returns {Boolean} true if left and right are within the provided epsilon, false otherwise.
*/
Cartographic.prototype.equalsEpsilon = function(right, epsilon) {
return Cartographic.equalsEpsilon(this, right, epsilon);
};
/**
* Creates a string representing this cartographic in the format '(longitude, latitude, height)'.
*
* @returns {String} A string representing the provided cartographic in the format '(longitude, latitude, height)'.
*/
Cartographic.prototype.toString = function() {
return '(' + this.longitude + ', ' + this.latitude + ', ' + this.height + ')';
};
return Cartographic;
});
/*global define*/
define('Core/defineProperties',[
'./defined'
], function(
defined) {
'use strict';
var definePropertyWorks = (function() {
try {
return 'x' in Object.defineProperty({}, 'x', {});
} catch (e) {
return false;
}
})();
/**
* Defines properties on an object, using Object.defineProperties if available,
* otherwise returns the object unchanged. This function should be used in
* setup code to prevent errors from completely halting JavaScript execution
* in legacy browsers.
*
* @private
*
* @exports defineProperties
*/
var defineProperties = Object.defineProperties;
if (!definePropertyWorks || !defined(defineProperties)) {
defineProperties = function(o) {
return o;
};
}
return defineProperties;
});
/*global define*/
define('Core/Ellipsoid',[
'./Cartesian3',
'./Cartographic',
'./defaultValue',
'./defined',
'./defineProperties',
'./DeveloperError',
'./freezeObject',
'./Math',
'./scaleToGeodeticSurface'
], function(
Cartesian3,
Cartographic,
defaultValue,
defined,
defineProperties,
DeveloperError,
freezeObject,
CesiumMath,
scaleToGeodeticSurface) {
'use strict';
function initialize(ellipsoid, x, y, z) {
x = defaultValue(x, 0.0);
y = defaultValue(y, 0.0);
z = defaultValue(z, 0.0);
if (x < 0.0 || y < 0.0 || z < 0.0) {
throw new DeveloperError('All radii components must be greater than or equal to zero.');
}
ellipsoid._radii = new Cartesian3(x, y, z);
ellipsoid._radiiSquared = new Cartesian3(x * x,
y * y,
z * z);
ellipsoid._radiiToTheFourth = new Cartesian3(x * x * x * x,
y * y * y * y,
z * z * z * z);
ellipsoid._oneOverRadii = new Cartesian3(x === 0.0 ? 0.0 : 1.0 / x,
y === 0.0 ? 0.0 : 1.0 / y,
z === 0.0 ? 0.0 : 1.0 / z);
ellipsoid._oneOverRadiiSquared = new Cartesian3(x === 0.0 ? 0.0 : 1.0 / (x * x),
y === 0.0 ? 0.0 : 1.0 / (y * y),
z === 0.0 ? 0.0 : 1.0 / (z * z));
ellipsoid._minimumRadius = Math.min(x, y, z);
ellipsoid._maximumRadius = Math.max(x, y, z);
ellipsoid._centerToleranceSquared = CesiumMath.EPSILON1;
if (ellipsoid._radiiSquared.z !== 0) {
ellipsoid._sqauredXOverSquaredZ = ellipsoid._radiiSquared.x / ellipsoid._radiiSquared.z;
}
}
/**
* A quadratic surface defined in Cartesian coordinates by the equation
* (x / a)^2 + (y / b)^2 + (z / c)^2 = 1. Primarily used
* by Cesium to represent the shape of planetary bodies.
*
* Rather than constructing this object directly, one of the provided
* constants is normally used.
* @alias Ellipsoid
* @constructor
*
* @param {Number} [x=0] The radius in the x direction.
* @param {Number} [y=0] The radius in the y direction.
* @param {Number} [z=0] The radius in the z direction.
*
* @exception {DeveloperError} All radii components must be greater than or equal to zero.
*
* @see Ellipsoid.fromCartesian3
* @see Ellipsoid.WGS84
* @see Ellipsoid.UNIT_SPHERE
*/
function Ellipsoid(x, y, z) {
this._radii = undefined;
this._radiiSquared = undefined;
this._radiiToTheFourth = undefined;
this._oneOverRadii = undefined;
this._oneOverRadiiSquared = undefined;
this._minimumRadius = undefined;
this._maximumRadius = undefined;
this._centerToleranceSquared = undefined;
this._sqauredXOverSquaredZ = undefined;
initialize(this, x, y, z);
}
defineProperties(Ellipsoid.prototype, {
/**
* Gets the radii of the ellipsoid.
* @memberof Ellipsoid.prototype
* @type {Cartesian3}
* @readonly
*/
radii : {
get: function() {
return this._radii;
}
},
/**
* Gets the squared radii of the ellipsoid.
* @memberof Ellipsoid.prototype
* @type {Cartesian3}
* @readonly
*/
radiiSquared : {
get : function() {
return this._radiiSquared;
}
},
/**
* Gets the radii of the ellipsoid raise to the fourth power.
* @memberof Ellipsoid.prototype
* @type {Cartesian3}
* @readonly
*/
radiiToTheFourth : {
get : function() {
return this._radiiToTheFourth;
}
},
/**
* Gets one over the radii of the ellipsoid.
* @memberof Ellipsoid.prototype
* @type {Cartesian3}
* @readonly
*/
oneOverRadii : {
get : function() {
return this._oneOverRadii;
}
},
/**
* Gets one over the squared radii of the ellipsoid.
* @memberof Ellipsoid.prototype
* @type {Cartesian3}
* @readonly
*/
oneOverRadiiSquared : {
get : function() {
return this._oneOverRadiiSquared;
}
},
/**
* Gets the minimum radius of the ellipsoid.
* @memberof Ellipsoid.prototype
* @type {Number}
* @readonly
*/
minimumRadius : {
get : function() {
return this._minimumRadius;
}
},
/**
* Gets the maximum radius of the ellipsoid.
* @memberof Ellipsoid.prototype
* @type {Number}
* @readonly
*/
maximumRadius : {
get : function() {
return this._maximumRadius;
}
}
});
/**
* Duplicates an Ellipsoid instance.
*
* @param {Ellipsoid} ellipsoid The ellipsoid to duplicate.
* @param {Ellipsoid} [result] The object onto which to store the result, or undefined if a new
* instance should be created.
* @returns {Ellipsoid} The cloned Ellipsoid. (Returns undefined if ellipsoid is undefined)
*/
Ellipsoid.clone = function(ellipsoid, result) {
if (!defined(ellipsoid)) {
return undefined;
}
var radii = ellipsoid._radii;
if (!defined(result)) {
return new Ellipsoid(radii.x, radii.y, radii.z);
}
Cartesian3.clone(radii, result._radii);
Cartesian3.clone(ellipsoid._radiiSquared, result._radiiSquared);
Cartesian3.clone(ellipsoid._radiiToTheFourth, result._radiiToTheFourth);
Cartesian3.clone(ellipsoid._oneOverRadii, result._oneOverRadii);
Cartesian3.clone(ellipsoid._oneOverRadiiSquared, result._oneOverRadiiSquared);
result._minimumRadius = ellipsoid._minimumRadius;
result._maximumRadius = ellipsoid._maximumRadius;
result._centerToleranceSquared = ellipsoid._centerToleranceSquared;
return result;
};
/**
* Computes an Ellipsoid from a Cartesian specifying the radii in x, y, and z directions.
*
* @param {Cartesian3} [radii=Cartesian3.ZERO] The ellipsoid's radius in the x, y, and z directions.
* @returns {Ellipsoid} A new Ellipsoid instance.
*
* @exception {DeveloperError} All radii components must be greater than or equal to zero.
*
* @see Ellipsoid.WGS84
* @see Ellipsoid.UNIT_SPHERE
*/
Ellipsoid.fromCartesian3 = function(cartesian, result) {
if (!defined(result)) {
result = new Ellipsoid();
}
if (!defined(cartesian)) {
return result;
}
initialize(result, cartesian.x, cartesian.y, cartesian.z);
return result;
};
/**
* An Ellipsoid instance initialized to the WGS84 standard.
*
* @type {Ellipsoid}
* @constant
*/
Ellipsoid.WGS84 = freezeObject(new Ellipsoid(6378137.0, 6378137.0, 6356752.3142451793));
/**
* An Ellipsoid instance initialized to radii of (1.0, 1.0, 1.0).
*
* @type {Ellipsoid}
* @constant
*/
Ellipsoid.UNIT_SPHERE = freezeObject(new Ellipsoid(1.0, 1.0, 1.0));
/**
* An Ellipsoid instance initialized to a sphere with the lunar radius.
*
* @type {Ellipsoid}
* @constant
*/
Ellipsoid.MOON = freezeObject(new Ellipsoid(CesiumMath.LUNAR_RADIUS, CesiumMath.LUNAR_RADIUS, CesiumMath.LUNAR_RADIUS));
/**
* Duplicates an Ellipsoid instance.
*
* @param {Ellipsoid} [result] The object onto which to store the result, or undefined if a new
* instance should be created.
* @returns {Ellipsoid} The cloned Ellipsoid.
*/
Ellipsoid.prototype.clone = function(result) {
return Ellipsoid.clone(this, result);
};
/**
* The number of elements used to pack the object into an array.
* @type {Number}
*/
Ellipsoid.packedLength = Cartesian3.packedLength;
/**
* Stores the provided instance into the provided array.
*
* @param {Ellipsoid} value The value to pack.
* @param {Number[]} array The array to pack into.
* @param {Number} [startingIndex=0] The index into the array at which to start packing the elements.
*
* @returns {Number[]} The array that was packed into
*/
Ellipsoid.pack = function(value, array, startingIndex) {
if (!defined(value)) {
throw new DeveloperError('value is required');
}
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
Cartesian3.pack(value._radii, array, startingIndex);
return array;
};
/**
* Retrieves an instance from a packed array.
*
* @param {Number[]} array The packed array.
* @param {Number} [startingIndex=0] The starting index of the element to be unpacked.
* @param {Ellipsoid} [result] The object into which to store the result.
* @returns {Ellipsoid} The modified result parameter or a new Ellipsoid instance if one was not provided.
*/
Ellipsoid.unpack = function(array, startingIndex, result) {
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
var radii = Cartesian3.unpack(array, startingIndex);
return Ellipsoid.fromCartesian3(radii, result);
};
/**
* Computes the unit vector directed from the center of this ellipsoid toward the provided Cartesian position.
* @function
*
* @param {Cartesian3} cartesian The Cartesian for which to to determine the geocentric normal.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter or a new Cartesian3 instance if none was provided.
*/
Ellipsoid.prototype.geocentricSurfaceNormal = Cartesian3.normalize;
/**
* Computes the normal of the plane tangent to the surface of the ellipsoid at the provided position.
*
* @param {Cartographic} cartographic The cartographic position for which to to determine the geodetic normal.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter or a new Cartesian3 instance if none was provided.
*/
Ellipsoid.prototype.geodeticSurfaceNormalCartographic = function(cartographic, result) {
if (!defined(cartographic)) {
throw new DeveloperError('cartographic is required.');
}
var longitude = cartographic.longitude;
var latitude = cartographic.latitude;
var cosLatitude = Math.cos(latitude);
var x = cosLatitude * Math.cos(longitude);
var y = cosLatitude * Math.sin(longitude);
var z = Math.sin(latitude);
if (!defined(result)) {
result = new Cartesian3();
}
result.x = x;
result.y = y;
result.z = z;
return Cartesian3.normalize(result, result);
};
/**
* Computes the normal of the plane tangent to the surface of the ellipsoid at the provided position.
*
* @param {Cartesian3} cartesian The Cartesian position for which to to determine the surface normal.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter or a new Cartesian3 instance if none was provided.
*/
Ellipsoid.prototype.geodeticSurfaceNormal = function(cartesian, result) {
if (!defined(result)) {
result = new Cartesian3();
}
result = Cartesian3.multiplyComponents(cartesian, this._oneOverRadiiSquared, result);
return Cartesian3.normalize(result, result);
};
var cartographicToCartesianNormal = new Cartesian3();
var cartographicToCartesianK = new Cartesian3();
/**
* Converts the provided cartographic to Cartesian representation.
*
* @param {Cartographic} cartographic The cartographic position.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter or a new Cartesian3 instance if none was provided.
*
* @example
* //Create a Cartographic and determine it's Cartesian representation on a WGS84 ellipsoid.
* var position = new Cesium.Cartographic(Cesium.Math.toRadians(21), Cesium.Math.toRadians(78), 5000);
* var cartesianPosition = Cesium.Ellipsoid.WGS84.cartographicToCartesian(position);
*/
Ellipsoid.prototype.cartographicToCartesian = function(cartographic, result) {
//`cartographic is required` is thrown from geodeticSurfaceNormalCartographic.
var n = cartographicToCartesianNormal;
var k = cartographicToCartesianK;
this.geodeticSurfaceNormalCartographic(cartographic, n);
Cartesian3.multiplyComponents(this._radiiSquared, n, k);
var gamma = Math.sqrt(Cartesian3.dot(n, k));
Cartesian3.divideByScalar(k, gamma, k);
Cartesian3.multiplyByScalar(n, cartographic.height, n);
if (!defined(result)) {
result = new Cartesian3();
}
return Cartesian3.add(k, n, result);
};
/**
* Converts the provided array of cartographics to an array of Cartesians.
*
* @param {Cartographic[]} cartographics An array of cartographic positions.
* @param {Cartesian3[]} [result] The object onto which to store the result.
* @returns {Cartesian3[]} The modified result parameter or a new Array instance if none was provided.
*
* @example
* //Convert an array of Cartographics and determine their Cartesian representation on a WGS84 ellipsoid.
* var positions = [new Cesium.Cartographic(Cesium.Math.toRadians(21), Cesium.Math.toRadians(78), 0),
* new Cesium.Cartographic(Cesium.Math.toRadians(21.321), Cesium.Math.toRadians(78.123), 100),
* new Cesium.Cartographic(Cesium.Math.toRadians(21.645), Cesium.Math.toRadians(78.456), 250)];
* var cartesianPositions = Cesium.Ellipsoid.WGS84.cartographicArrayToCartesianArray(positions);
*/
Ellipsoid.prototype.cartographicArrayToCartesianArray = function(cartographics, result) {
if (!defined(cartographics)) {
throw new DeveloperError('cartographics is required.');
}
var length = cartographics.length;
if (!defined(result)) {
result = new Array(length);
} else {
result.length = length;
}
for ( var i = 0; i < length; i++) {
result[i] = this.cartographicToCartesian(cartographics[i], result[i]);
}
return result;
};
var cartesianToCartographicN = new Cartesian3();
var cartesianToCartographicP = new Cartesian3();
var cartesianToCartographicH = new Cartesian3();
/**
* Converts the provided cartesian to cartographic representation.
* The cartesian is undefined at the center of the ellipsoid.
*
* @param {Cartesian3} cartesian The Cartesian position to convert to cartographic representation.
* @param {Cartographic} [result] The object onto which to store the result.
* @returns {Cartographic} The modified result parameter, new Cartographic instance if none was provided, or undefined if the cartesian is at the center of the ellipsoid.
*
* @example
* //Create a Cartesian and determine it's Cartographic representation on a WGS84 ellipsoid.
* var position = new Cesium.Cartesian3(17832.12, 83234.52, 952313.73);
* var cartographicPosition = Cesium.Ellipsoid.WGS84.cartesianToCartographic(position);
*/
Ellipsoid.prototype.cartesianToCartographic = function(cartesian, result) {
//`cartesian is required.` is thrown from scaleToGeodeticSurface
var p = this.scaleToGeodeticSurface(cartesian, cartesianToCartographicP);
if (!defined(p)) {
return undefined;
}
var n = this.geodeticSurfaceNormal(p, cartesianToCartographicN);
var h = Cartesian3.subtract(cartesian, p, cartesianToCartographicH);
var longitude = Math.atan2(n.y, n.x);
var latitude = Math.asin(n.z);
var height = CesiumMath.sign(Cartesian3.dot(h, cartesian)) * Cartesian3.magnitude(h);
if (!defined(result)) {
return new Cartographic(longitude, latitude, height);
}
result.longitude = longitude;
result.latitude = latitude;
result.height = height;
return result;
};
/**
* Converts the provided array of cartesians to an array of cartographics.
*
* @param {Cartesian3[]} cartesians An array of Cartesian positions.
* @param {Cartographic[]} [result] The object onto which to store the result.
* @returns {Cartographic[]} The modified result parameter or a new Array instance if none was provided.
*
* @example
* //Create an array of Cartesians and determine their Cartographic representation on a WGS84 ellipsoid.
* var positions = [new Cesium.Cartesian3(17832.12, 83234.52, 952313.73),
* new Cesium.Cartesian3(17832.13, 83234.53, 952313.73),
* new Cesium.Cartesian3(17832.14, 83234.54, 952313.73)]
* var cartographicPositions = Cesium.Ellipsoid.WGS84.cartesianArrayToCartographicArray(positions);
*/
Ellipsoid.prototype.cartesianArrayToCartographicArray = function(cartesians, result) {
if (!defined(cartesians)) {
throw new DeveloperError('cartesians is required.');
}
var length = cartesians.length;
if (!defined(result)) {
result = new Array(length);
} else {
result.length = length;
}
for ( var i = 0; i < length; ++i) {
result[i] = this.cartesianToCartographic(cartesians[i], result[i]);
}
return result;
};
/**
* Scales the provided Cartesian position along the geodetic surface normal
* so that it is on the surface of this ellipsoid. If the position is
* at the center of the ellipsoid, this function returns undefined.
*
* @param {Cartesian3} cartesian The Cartesian position to scale.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter, a new Cartesian3 instance if none was provided, or undefined if the position is at the center.
*/
Ellipsoid.prototype.scaleToGeodeticSurface = function(cartesian, result) {
return scaleToGeodeticSurface(cartesian, this._oneOverRadii, this._oneOverRadiiSquared, this._centerToleranceSquared, result);
};
/**
* Scales the provided Cartesian position along the geocentric surface normal
* so that it is on the surface of this ellipsoid.
*
* @param {Cartesian3} cartesian The Cartesian position to scale.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter or a new Cartesian3 instance if none was provided.
*/
Ellipsoid.prototype.scaleToGeocentricSurface = function(cartesian, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required.');
}
if (!defined(result)) {
result = new Cartesian3();
}
var positionX = cartesian.x;
var positionY = cartesian.y;
var positionZ = cartesian.z;
var oneOverRadiiSquared = this._oneOverRadiiSquared;
var beta = 1.0 / Math.sqrt((positionX * positionX) * oneOverRadiiSquared.x +
(positionY * positionY) * oneOverRadiiSquared.y +
(positionZ * positionZ) * oneOverRadiiSquared.z);
return Cartesian3.multiplyByScalar(cartesian, beta, result);
};
/**
* Transforms a Cartesian X, Y, Z position to the ellipsoid-scaled space by multiplying
* its components by the result of {@link Ellipsoid#oneOverRadii}.
*
* @param {Cartesian3} position The position to transform.
* @param {Cartesian3} [result] The position to which to copy the result, or undefined to create and
* return a new instance.
* @returns {Cartesian3} The position expressed in the scaled space. The returned instance is the
* one passed as the result parameter if it is not undefined, or a new instance of it is.
*/
Ellipsoid.prototype.transformPositionToScaledSpace = function(position, result) {
if (!defined(result)) {
result = new Cartesian3();
}
return Cartesian3.multiplyComponents(position, this._oneOverRadii, result);
};
/**
* Transforms a Cartesian X, Y, Z position from the ellipsoid-scaled space by multiplying
* its components by the result of {@link Ellipsoid#radii}.
*
* @param {Cartesian3} position The position to transform.
* @param {Cartesian3} [result] The position to which to copy the result, or undefined to create and
* return a new instance.
* @returns {Cartesian3} The position expressed in the unscaled space. The returned instance is the
* one passed as the result parameter if it is not undefined, or a new instance of it is.
*/
Ellipsoid.prototype.transformPositionFromScaledSpace = function(position, result) {
if (!defined(result)) {
result = new Cartesian3();
}
return Cartesian3.multiplyComponents(position, this._radii, result);
};
/**
* Compares this Ellipsoid against the provided Ellipsoid componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Ellipsoid} [right] The other Ellipsoid.
* @returns {Boolean} true if they are equal, false otherwise.
*/
Ellipsoid.prototype.equals = function(right) {
return (this === right) ||
(defined(right) &&
Cartesian3.equals(this._radii, right._radii));
};
/**
* Creates a string representing this Ellipsoid in the format '(radii.x, radii.y, radii.z)'.
*
* @returns {String} A string representing this ellipsoid in the format '(radii.x, radii.y, radii.z)'.
*/
Ellipsoid.prototype.toString = function() {
return this._radii.toString();
};
/**
* Computes a point which is the intersection of the surface normal with the z-axis.
*
* @param {Cartesian3} position the position. must be on the surface of the ellipsoid.
* @param {Number} [buffer = 0.0] A buffer to subtract from the ellipsoid size when checking if the point is inside the ellipsoid.
* In earth case, with common earth datums, there is no need for this buffer since the intersection point is always (relatively) very close to the center.
* In WGS84 datum, intersection point is at max z = +-42841.31151331382 (0.673% of z-axis).
* Intersection point could be outside the ellipsoid if the ratio of MajorAxis / AxisOfRotation is bigger than the square root of 2
* @param {Cartesian} [result] The cartesian to which to copy the result, or undefined to create and
* return a new instance.
* @returns {Cartesian | undefined} the intersection point if it's inside the ellipsoid, undefined otherwise
*
* @exception {DeveloperError} position is required.
* @exception {DeveloperError} Ellipsoid must be an ellipsoid of revolution (radii.x == radii.y).
* @exception {DeveloperError} Ellipsoid.radii.z must be greater than 0.
*/
Ellipsoid.prototype.getSurfaceNormalIntersectionWithZAxis = function(position, buffer, result) {
if (!defined(position)) {
throw new DeveloperError('position is required.');
}
if (!CesiumMath.equalsEpsilon(this._radii.x, this._radii.y, CesiumMath.EPSILON15)) {
throw new DeveloperError('Ellipsoid must be an ellipsoid of revolution (radii.x == radii.y)');
}
if (this._radii.z === 0) {
throw new DeveloperError('Ellipsoid.radii.z must be greater than 0');
}
buffer = defaultValue(buffer, 0.0);
var sqauredXOverSquaredZ = this._sqauredXOverSquaredZ;
if (!defined(result)) {
result = new Cartesian3();
}
result.x = 0.0;
result.y = 0.0;
result.z = position.z * (1 - sqauredXOverSquaredZ);
if (Math.abs(result.z) >= this._radii.z - buffer) {
return undefined;
}
return result;
};
return Ellipsoid;
});
/*global define*/
define('Core/GeographicProjection',[
'./Cartesian3',
'./Cartographic',
'./defaultValue',
'./defined',
'./defineProperties',
'./DeveloperError',
'./Ellipsoid'
], function(
Cartesian3,
Cartographic,
defaultValue,
defined,
defineProperties,
DeveloperError,
Ellipsoid) {
'use strict';
/**
* A simple map projection where longitude and latitude are linearly mapped to X and Y by multiplying
* them by the {@link Ellipsoid#maximumRadius}. This projection
* is commonly known as geographic, equirectangular, equidistant cylindrical, or plate carrée. It
* is also known as EPSG:4326.
*
* @alias GeographicProjection
* @constructor
*
* @param {Ellipsoid} [ellipsoid=Ellipsoid.WGS84] The ellipsoid.
*
* @see WebMercatorProjection
*/
function GeographicProjection(ellipsoid) {
this._ellipsoid = defaultValue(ellipsoid, Ellipsoid.WGS84);
this._semimajorAxis = this._ellipsoid.maximumRadius;
this._oneOverSemimajorAxis = 1.0 / this._semimajorAxis;
}
defineProperties(GeographicProjection.prototype, {
/**
* Gets the {@link Ellipsoid}.
*
* @memberof GeographicProjection.prototype
*
* @type {Ellipsoid}
* @readonly
*/
ellipsoid : {
get : function() {
return this._ellipsoid;
}
}
});
/**
* Projects a set of {@link Cartographic} coordinates, in radians, to map coordinates, in meters.
* X and Y are the longitude and latitude, respectively, multiplied by the maximum radius of the
* ellipsoid. Z is the unmodified height.
*
* @param {Cartographic} cartographic The coordinates to project.
* @param {Cartesian3} [result] An instance into which to copy the result. If this parameter is
* undefined, a new instance is created and returned.
* @returns {Cartesian3} The projected coordinates. If the result parameter is not undefined, the
* coordinates are copied there and that instance is returned. Otherwise, a new instance is
* created and returned.
*/
GeographicProjection.prototype.project = function(cartographic, result) {
// Actually this is the special case of equidistant cylindrical called the plate carree
var semimajorAxis = this._semimajorAxis;
var x = cartographic.longitude * semimajorAxis;
var y = cartographic.latitude * semimajorAxis;
var z = cartographic.height;
if (!defined(result)) {
return new Cartesian3(x, y, z);
}
result.x = x;
result.y = y;
result.z = z;
return result;
};
/**
* Unprojects a set of projected {@link Cartesian3} coordinates, in meters, to {@link Cartographic}
* coordinates, in radians. Longitude and Latitude are the X and Y coordinates, respectively,
* divided by the maximum radius of the ellipsoid. Height is the unmodified Z coordinate.
*
* @param {Cartesian3} cartesian The Cartesian position to unproject with height (z) in meters.
* @param {Cartographic} [result] An instance into which to copy the result. If this parameter is
* undefined, a new instance is created and returned.
* @returns {Cartographic} The unprojected coordinates. If the result parameter is not undefined, the
* coordinates are copied there and that instance is returned. Otherwise, a new instance is
* created and returned.
*/
GeographicProjection.prototype.unproject = function(cartesian, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
var oneOverEarthSemimajorAxis = this._oneOverSemimajorAxis;
var longitude = cartesian.x * oneOverEarthSemimajorAxis;
var latitude = cartesian.y * oneOverEarthSemimajorAxis;
var height = cartesian.z;
if (!defined(result)) {
return new Cartographic(longitude, latitude, height);
}
result.longitude = longitude;
result.latitude = latitude;
result.height = height;
return result;
};
return GeographicProjection;
});
/*global define*/
define('Core/Intersect',[
'./freezeObject'
], function(
freezeObject) {
'use strict';
/**
* This enumerated type is used in determining where, relative to the frustum, an
* object is located. The object can either be fully contained within the frustum (INSIDE),
* partially inside the frustum and partially outside (INTERSECTING), or somwhere entirely
* outside of the frustum's 6 planes (OUTSIDE).
*
* @exports Intersect
*/
var Intersect = {
/**
* Represents that an object is not contained within the frustum.
*
* @type {Number}
* @constant
*/
OUTSIDE : -1,
/**
* Represents that an object intersects one of the frustum's planes.
*
* @type {Number}
* @constant
*/
INTERSECTING : 0,
/**
* Represents that an object is fully within the frustum.
*
* @type {Number}
* @constant
*/
INSIDE : 1
};
return freezeObject(Intersect);
});
/*global define*/
define('Core/Interval',[
'./defaultValue'
], function(
defaultValue) {
'use strict';
/**
* Represents the closed interval [start, stop].
* @alias Interval
* @constructor
*
* @param {Number} [start=0.0] The beginning of the interval.
* @param {Number} [stop=0.0] The end of the interval.
*/
function Interval(start, stop) {
/**
* The beginning of the interval.
* @type {Number}
* @default 0.0
*/
this.start = defaultValue(start, 0.0);
/**
* The end of the interval.
* @type {Number}
* @default 0.0
*/
this.stop = defaultValue(stop, 0.0);
}
return Interval;
});
/*global define*/
define('Core/Matrix3',[
'./Cartesian3',
'./defaultValue',
'./defined',
'./defineProperties',
'./DeveloperError',
'./freezeObject',
'./Math'
], function(
Cartesian3,
defaultValue,
defined,
defineProperties,
DeveloperError,
freezeObject,
CesiumMath) {
'use strict';
/**
* A 3x3 matrix, indexable as a column-major order array.
* Constructor parameters are in row-major order for code readability.
* @alias Matrix3
* @constructor
*
* @param {Number} [column0Row0=0.0] The value for column 0, row 0.
* @param {Number} [column1Row0=0.0] The value for column 1, row 0.
* @param {Number} [column2Row0=0.0] The value for column 2, row 0.
* @param {Number} [column0Row1=0.0] The value for column 0, row 1.
* @param {Number} [column1Row1=0.0] The value for column 1, row 1.
* @param {Number} [column2Row1=0.0] The value for column 2, row 1.
* @param {Number} [column0Row2=0.0] The value for column 0, row 2.
* @param {Number} [column1Row2=0.0] The value for column 1, row 2.
* @param {Number} [column2Row2=0.0] The value for column 2, row 2.
*
* @see Matrix3.fromColumnMajorArray
* @see Matrix3.fromRowMajorArray
* @see Matrix3.fromQuaternion
* @see Matrix3.fromScale
* @see Matrix3.fromUniformScale
* @see Matrix2
* @see Matrix4
*/
function Matrix3(column0Row0, column1Row0, column2Row0,
column0Row1, column1Row1, column2Row1,
column0Row2, column1Row2, column2Row2) {
this[0] = defaultValue(column0Row0, 0.0);
this[1] = defaultValue(column0Row1, 0.0);
this[2] = defaultValue(column0Row2, 0.0);
this[3] = defaultValue(column1Row0, 0.0);
this[4] = defaultValue(column1Row1, 0.0);
this[5] = defaultValue(column1Row2, 0.0);
this[6] = defaultValue(column2Row0, 0.0);
this[7] = defaultValue(column2Row1, 0.0);
this[8] = defaultValue(column2Row2, 0.0);
}
/**
* The number of elements used to pack the object into an array.
* @type {Number}
*/
Matrix3.packedLength = 9;
/**
* Stores the provided instance into the provided array.
*
* @param {Matrix3} value The value to pack.
* @param {Number[]} array The array to pack into.
* @param {Number} [startingIndex=0] The index into the array at which to start packing the elements.
*
* @returns {Number[]} The array that was packed into
*/
Matrix3.pack = function(value, array, startingIndex) {
if (!defined(value)) {
throw new DeveloperError('value is required');
}
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
array[startingIndex++] = value[0];
array[startingIndex++] = value[1];
array[startingIndex++] = value[2];
array[startingIndex++] = value[3];
array[startingIndex++] = value[4];
array[startingIndex++] = value[5];
array[startingIndex++] = value[6];
array[startingIndex++] = value[7];
array[startingIndex++] = value[8];
return array;
};
/**
* Retrieves an instance from a packed array.
*
* @param {Number[]} array The packed array.
* @param {Number} [startingIndex=0] The starting index of the element to be unpacked.
* @param {Matrix3} [result] The object into which to store the result.
* @returns {Matrix3} The modified result parameter or a new Matrix3 instance if one was not provided.
*/
Matrix3.unpack = function(array, startingIndex, result) {
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
if (!defined(result)) {
result = new Matrix3();
}
result[0] = array[startingIndex++];
result[1] = array[startingIndex++];
result[2] = array[startingIndex++];
result[3] = array[startingIndex++];
result[4] = array[startingIndex++];
result[5] = array[startingIndex++];
result[6] = array[startingIndex++];
result[7] = array[startingIndex++];
result[8] = array[startingIndex++];
return result;
};
/**
* Duplicates a Matrix3 instance.
*
* @param {Matrix3} matrix The matrix to duplicate.
* @param {Matrix3} [result] The object onto which to store the result.
* @returns {Matrix3} The modified result parameter or a new Matrix3 instance if one was not provided. (Returns undefined if matrix is undefined)
*/
Matrix3.clone = function(values, result) {
if (!defined(values)) {
return undefined;
}
if (!defined(result)) {
return new Matrix3(values[0], values[3], values[6],
values[1], values[4], values[7],
values[2], values[5], values[8]);
}
result[0] = values[0];
result[1] = values[1];
result[2] = values[2];
result[3] = values[3];
result[4] = values[4];
result[5] = values[5];
result[6] = values[6];
result[7] = values[7];
result[8] = values[8];
return result;
};
/**
* Creates a Matrix3 from 9 consecutive elements in an array.
*
* @param {Number[]} array The array whose 9 consecutive elements correspond to the positions of the matrix. Assumes column-major order.
* @param {Number} [startingIndex=0] The offset into the array of the first element, which corresponds to first column first row position in the matrix.
* @param {Matrix3} [result] The object onto which to store the result.
* @returns {Matrix3} The modified result parameter or a new Matrix3 instance if one was not provided.
*
* @example
* // Create the Matrix3:
* // [1.0, 2.0, 3.0]
* // [1.0, 2.0, 3.0]
* // [1.0, 2.0, 3.0]
*
* var v = [1.0, 1.0, 1.0, 2.0, 2.0, 2.0, 3.0, 3.0, 3.0];
* var m = Cesium.Matrix3.fromArray(v);
*
* // Create same Matrix3 with using an offset into an array
* var v2 = [0.0, 0.0, 1.0, 1.0, 1.0, 2.0, 2.0, 2.0, 3.0, 3.0, 3.0];
* var m2 = Cesium.Matrix3.fromArray(v2, 2);
*/
Matrix3.fromArray = function(array, startingIndex, result) {
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
if (!defined(result)) {
result = new Matrix3();
}
result[0] = array[startingIndex];
result[1] = array[startingIndex + 1];
result[2] = array[startingIndex + 2];
result[3] = array[startingIndex + 3];
result[4] = array[startingIndex + 4];
result[5] = array[startingIndex + 5];
result[6] = array[startingIndex + 6];
result[7] = array[startingIndex + 7];
result[8] = array[startingIndex + 8];
return result;
};
/**
* Creates a Matrix3 instance from a column-major order array.
*
* @param {Number[]} values The column-major order array.
* @param {Matrix3} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix3} The modified result parameter, or a new Matrix3 instance if one was not provided.
*/
Matrix3.fromColumnMajorArray = function(values, result) {
if (!defined(values)) {
throw new DeveloperError('values parameter is required');
}
return Matrix3.clone(values, result);
};
/**
* Creates a Matrix3 instance from a row-major order array.
* The resulting matrix will be in column-major order.
*
* @param {Number[]} values The row-major order array.
* @param {Matrix3} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix3} The modified result parameter, or a new Matrix3 instance if one was not provided.
*/
Matrix3.fromRowMajorArray = function(values, result) {
if (!defined(values)) {
throw new DeveloperError('values is required.');
}
if (!defined(result)) {
return new Matrix3(values[0], values[1], values[2],
values[3], values[4], values[5],
values[6], values[7], values[8]);
}
result[0] = values[0];
result[1] = values[3];
result[2] = values[6];
result[3] = values[1];
result[4] = values[4];
result[5] = values[7];
result[6] = values[2];
result[7] = values[5];
result[8] = values[8];
return result;
};
/**
* Computes a 3x3 rotation matrix from the provided quaternion.
*
* @param {Quaternion} quaternion the quaternion to use.
* @param {Matrix3} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix3} The 3x3 rotation matrix from this quaternion.
*/
Matrix3.fromQuaternion = function(quaternion, result) {
if (!defined(quaternion)) {
throw new DeveloperError('quaternion is required');
}
var x2 = quaternion.x * quaternion.x;
var xy = quaternion.x * quaternion.y;
var xz = quaternion.x * quaternion.z;
var xw = quaternion.x * quaternion.w;
var y2 = quaternion.y * quaternion.y;
var yz = quaternion.y * quaternion.z;
var yw = quaternion.y * quaternion.w;
var z2 = quaternion.z * quaternion.z;
var zw = quaternion.z * quaternion.w;
var w2 = quaternion.w * quaternion.w;
var m00 = x2 - y2 - z2 + w2;
var m01 = 2.0 * (xy - zw);
var m02 = 2.0 * (xz + yw);
var m10 = 2.0 * (xy + zw);
var m11 = -x2 + y2 - z2 + w2;
var m12 = 2.0 * (yz - xw);
var m20 = 2.0 * (xz - yw);
var m21 = 2.0 * (yz + xw);
var m22 = -x2 - y2 + z2 + w2;
if (!defined(result)) {
return new Matrix3(m00, m01, m02,
m10, m11, m12,
m20, m21, m22);
}
result[0] = m00;
result[1] = m10;
result[2] = m20;
result[3] = m01;
result[4] = m11;
result[5] = m21;
result[6] = m02;
result[7] = m12;
result[8] = m22;
return result;
};
/**
* Computes a 3x3 rotation matrix from the provided headingPitchRoll. (see http://en.wikipedia.org/wiki/Conversion_between_quaternions_and_Euler_angles )
*
* @param {HeadingPitchRoll} headingPitchRoll the headingPitchRoll to use.
* @param {Matrix3} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix3} The 3x3 rotation matrix from this headingPitchRoll.
*/
Matrix3.fromHeadingPitchRoll = function(headingPitchRoll, result) {
if (!defined(headingPitchRoll)) {
throw new DeveloperError('headingPitchRoll is required');
}
var cosTheta = Math.cos(-headingPitchRoll.pitch);
var cosPsi = Math.cos(-headingPitchRoll.heading);
var cosPhi = Math.cos(headingPitchRoll.roll);
var sinTheta = Math.sin(-headingPitchRoll.pitch);
var sinPsi = Math.sin(-headingPitchRoll.heading);
var sinPhi = Math.sin(headingPitchRoll.roll);
var m00 = cosTheta * cosPsi;
var m01 = -cosPhi * sinPsi + sinPhi * sinTheta * cosPsi;
var m02 = sinPhi * sinPsi + cosPhi * sinTheta * cosPsi;
var m10 = cosTheta * sinPsi;
var m11 = cosPhi * cosPsi + sinPhi * sinTheta * sinPsi;
var m12 = -sinTheta * cosPhi + cosPhi * sinTheta * sinPsi;
var m20 = -sinTheta;
var m21 = sinPhi * cosTheta;
var m22 = cosPhi * cosTheta;
if (!defined(result)) {
return new Matrix3(m00, m01, m02,
m10, m11, m12,
m20, m21, m22);
}
result[0] = m00;
result[1] = m10;
result[2] = m20;
result[3] = m01;
result[4] = m11;
result[5] = m21;
result[6] = m02;
result[7] = m12;
result[8] = m22;
return result;
};
/**
* Computes a Matrix3 instance representing a non-uniform scale.
*
* @param {Cartesian3} scale The x, y, and z scale factors.
* @param {Matrix3} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix3} The modified result parameter, or a new Matrix3 instance if one was not provided.
*
* @example
* // Creates
* // [7.0, 0.0, 0.0]
* // [0.0, 8.0, 0.0]
* // [0.0, 0.0, 9.0]
* var m = Cesium.Matrix3.fromScale(new Cesium.Cartesian3(7.0, 8.0, 9.0));
*/
Matrix3.fromScale = function(scale, result) {
if (!defined(scale)) {
throw new DeveloperError('scale is required.');
}
if (!defined(result)) {
return new Matrix3(
scale.x, 0.0, 0.0,
0.0, scale.y, 0.0,
0.0, 0.0, scale.z);
}
result[0] = scale.x;
result[1] = 0.0;
result[2] = 0.0;
result[3] = 0.0;
result[4] = scale.y;
result[5] = 0.0;
result[6] = 0.0;
result[7] = 0.0;
result[8] = scale.z;
return result;
};
/**
* Computes a Matrix3 instance representing a uniform scale.
*
* @param {Number} scale The uniform scale factor.
* @param {Matrix3} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix3} The modified result parameter, or a new Matrix3 instance if one was not provided.
*
* @example
* // Creates
* // [2.0, 0.0, 0.0]
* // [0.0, 2.0, 0.0]
* // [0.0, 0.0, 2.0]
* var m = Cesium.Matrix3.fromUniformScale(2.0);
*/
Matrix3.fromUniformScale = function(scale, result) {
if (typeof scale !== 'number') {
throw new DeveloperError('scale is required.');
}
if (!defined(result)) {
return new Matrix3(
scale, 0.0, 0.0,
0.0, scale, 0.0,
0.0, 0.0, scale);
}
result[0] = scale;
result[1] = 0.0;
result[2] = 0.0;
result[3] = 0.0;
result[4] = scale;
result[5] = 0.0;
result[6] = 0.0;
result[7] = 0.0;
result[8] = scale;
return result;
};
/**
* Computes a Matrix3 instance representing the cross product equivalent matrix of a Cartesian3 vector.
*
* @param {Cartesian3} the vector on the left hand side of the cross product operation.
* @param {Matrix3} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix3} The modified result parameter, or a new Matrix3 instance if one was not provided.
*
* @example
* // Creates
* // [0.0, -9.0, 8.0]
* // [9.0, 0.0, -7.0]
* // [-8.0, 7.0, 0.0]
* var m = Cesium.Matrix3.fromCrossProduct(new Cesium.Cartesian3(7.0, 8.0, 9.0));
*/
Matrix3.fromCrossProduct = function(vector, result) {
if (!defined(vector)) {
throw new DeveloperError('vector is required.');
}
if (!defined(result)) {
return new Matrix3(
0.0, -vector.z, vector.y,
vector.z, 0.0, -vector.x,
-vector.y, vector.x, 0.0);
}
result[0] = 0.0;
result[1] = vector.z;
result[2] = -vector.y;
result[3] = -vector.z;
result[4] = 0.0;
result[5] = vector.x;
result[6] = vector.y;
result[7] = -vector.x;
result[8] = 0.0;
return result;
};
/**
* Creates a rotation matrix around the x-axis.
*
* @param {Number} angle The angle, in radians, of the rotation. Positive angles are counterclockwise.
* @param {Matrix3} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix3} The modified result parameter, or a new Matrix3 instance if one was not provided.
*
* @example
* // Rotate a point 45 degrees counterclockwise around the x-axis.
* var p = new Cesium.Cartesian3(5, 6, 7);
* var m = Cesium.Matrix3.fromRotationX(Cesium.Math.toRadians(45.0));
* var rotated = Cesium.Matrix3.multiplyByVector(m, p, new Cesium.Cartesian3());
*/
Matrix3.fromRotationX = function(angle, result) {
if (!defined(angle)) {
throw new DeveloperError('angle is required.');
}
var cosAngle = Math.cos(angle);
var sinAngle = Math.sin(angle);
if (!defined(result)) {
return new Matrix3(
1.0, 0.0, 0.0,
0.0, cosAngle, -sinAngle,
0.0, sinAngle, cosAngle);
}
result[0] = 1.0;
result[1] = 0.0;
result[2] = 0.0;
result[3] = 0.0;
result[4] = cosAngle;
result[5] = sinAngle;
result[6] = 0.0;
result[7] = -sinAngle;
result[8] = cosAngle;
return result;
};
/**
* Creates a rotation matrix around the y-axis.
*
* @param {Number} angle The angle, in radians, of the rotation. Positive angles are counterclockwise.
* @param {Matrix3} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix3} The modified result parameter, or a new Matrix3 instance if one was not provided.
*
* @example
* // Rotate a point 45 degrees counterclockwise around the y-axis.
* var p = new Cesium.Cartesian3(5, 6, 7);
* var m = Cesium.Matrix3.fromRotationY(Cesium.Math.toRadians(45.0));
* var rotated = Cesium.Matrix3.multiplyByVector(m, p, new Cesium.Cartesian3());
*/
Matrix3.fromRotationY = function(angle, result) {
if (!defined(angle)) {
throw new DeveloperError('angle is required.');
}
var cosAngle = Math.cos(angle);
var sinAngle = Math.sin(angle);
if (!defined(result)) {
return new Matrix3(
cosAngle, 0.0, sinAngle,
0.0, 1.0, 0.0,
-sinAngle, 0.0, cosAngle);
}
result[0] = cosAngle;
result[1] = 0.0;
result[2] = -sinAngle;
result[3] = 0.0;
result[4] = 1.0;
result[5] = 0.0;
result[6] = sinAngle;
result[7] = 0.0;
result[8] = cosAngle;
return result;
};
/**
* Creates a rotation matrix around the z-axis.
*
* @param {Number} angle The angle, in radians, of the rotation. Positive angles are counterclockwise.
* @param {Matrix3} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix3} The modified result parameter, or a new Matrix3 instance if one was not provided.
*
* @example
* // Rotate a point 45 degrees counterclockwise around the z-axis.
* var p = new Cesium.Cartesian3(5, 6, 7);
* var m = Cesium.Matrix3.fromRotationZ(Cesium.Math.toRadians(45.0));
* var rotated = Cesium.Matrix3.multiplyByVector(m, p, new Cesium.Cartesian3());
*/
Matrix3.fromRotationZ = function(angle, result) {
if (!defined(angle)) {
throw new DeveloperError('angle is required.');
}
var cosAngle = Math.cos(angle);
var sinAngle = Math.sin(angle);
if (!defined(result)) {
return new Matrix3(
cosAngle, -sinAngle, 0.0,
sinAngle, cosAngle, 0.0,
0.0, 0.0, 1.0);
}
result[0] = cosAngle;
result[1] = sinAngle;
result[2] = 0.0;
result[3] = -sinAngle;
result[4] = cosAngle;
result[5] = 0.0;
result[6] = 0.0;
result[7] = 0.0;
result[8] = 1.0;
return result;
};
/**
* Creates an Array from the provided Matrix3 instance.
* The array will be in column-major order.
*
* @param {Matrix3} matrix The matrix to use..
* @param {Number[]} [result] The Array onto which to store the result.
* @returns {Number[]} The modified Array parameter or a new Array instance if one was not provided.
*/
Matrix3.toArray = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
return [matrix[0], matrix[1], matrix[2], matrix[3], matrix[4], matrix[5], matrix[6], matrix[7], matrix[8]];
}
result[0] = matrix[0];
result[1] = matrix[1];
result[2] = matrix[2];
result[3] = matrix[3];
result[4] = matrix[4];
result[5] = matrix[5];
result[6] = matrix[6];
result[7] = matrix[7];
result[8] = matrix[8];
return result;
};
/**
* Computes the array index of the element at the provided row and column.
*
* @param {Number} row The zero-based index of the row.
* @param {Number} column The zero-based index of the column.
* @returns {Number} The index of the element at the provided row and column.
*
* @exception {DeveloperError} row must be 0, 1, or 2.
* @exception {DeveloperError} column must be 0, 1, or 2.
*
* @example
* var myMatrix = new Cesium.Matrix3();
* var column1Row0Index = Cesium.Matrix3.getElementIndex(1, 0);
* var column1Row0 = myMatrix[column1Row0Index]
* myMatrix[column1Row0Index] = 10.0;
*/
Matrix3.getElementIndex = function(column, row) {
if (typeof row !== 'number' || row < 0 || row > 2) {
throw new DeveloperError('row must be 0, 1, or 2.');
}
if (typeof column !== 'number' || column < 0 || column > 2) {
throw new DeveloperError('column must be 0, 1, or 2.');
}
return column * 3 + row;
};
/**
* Retrieves a copy of the matrix column at the provided index as a Cartesian3 instance.
*
* @param {Matrix3} matrix The matrix to use.
* @param {Number} index The zero-based index of the column to retrieve.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*
* @exception {DeveloperError} index must be 0, 1, or 2.
*/
Matrix3.getColumn = function(matrix, index, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required.');
}
if (typeof index !== 'number' || index < 0 || index > 2) {
throw new DeveloperError('index must be 0, 1, or 2.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var startIndex = index * 3;
var x = matrix[startIndex];
var y = matrix[startIndex + 1];
var z = matrix[startIndex + 2];
result.x = x;
result.y = y;
result.z = z;
return result;
};
/**
* Computes a new matrix that replaces the specified column in the provided matrix with the provided Cartesian3 instance.
*
* @param {Matrix3} matrix The matrix to use.
* @param {Number} index The zero-based index of the column to set.
* @param {Cartesian3} cartesian The Cartesian whose values will be assigned to the specified column.
* @param {Matrix3} result The object onto which to store the result.
* @returns {Matrix3} The modified result parameter.
*
* @exception {DeveloperError} index must be 0, 1, or 2.
*/
Matrix3.setColumn = function(matrix, index, cartesian, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (typeof index !== 'number' || index < 0 || index > 2) {
throw new DeveloperError('index must be 0, 1, or 2.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result = Matrix3.clone(matrix, result);
var startIndex = index * 3;
result[startIndex] = cartesian.x;
result[startIndex + 1] = cartesian.y;
result[startIndex + 2] = cartesian.z;
return result;
};
/**
* Retrieves a copy of the matrix row at the provided index as a Cartesian3 instance.
*
* @param {Matrix3} matrix The matrix to use.
* @param {Number} index The zero-based index of the row to retrieve.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*
* @exception {DeveloperError} index must be 0, 1, or 2.
*/
Matrix3.getRow = function(matrix, index, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required.');
}
if (typeof index !== 'number' || index < 0 || index > 2) {
throw new DeveloperError('index must be 0, 1, or 2.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var x = matrix[index];
var y = matrix[index + 3];
var z = matrix[index + 6];
result.x = x;
result.y = y;
result.z = z;
return result;
};
/**
* Computes a new matrix that replaces the specified row in the provided matrix with the provided Cartesian3 instance.
*
* @param {Matrix3} matrix The matrix to use.
* @param {Number} index The zero-based index of the row to set.
* @param {Cartesian3} cartesian The Cartesian whose values will be assigned to the specified row.
* @param {Matrix3} result The object onto which to store the result.
* @returns {Matrix3} The modified result parameter.
*
* @exception {DeveloperError} index must be 0, 1, or 2.
*/
Matrix3.setRow = function(matrix, index, cartesian, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (typeof index !== 'number' || index < 0 || index > 2) {
throw new DeveloperError('index must be 0, 1, or 2.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result = Matrix3.clone(matrix, result);
result[index] = cartesian.x;
result[index + 3] = cartesian.y;
result[index + 6] = cartesian.z;
return result;
};
var scratchColumn = new Cartesian3();
/**
* Extracts the non-uniform scale assuming the matrix is an affine transformation.
*
* @param {Matrix3} matrix The matrix.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Matrix3.getScale = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = Cartesian3.magnitude(Cartesian3.fromElements(matrix[0], matrix[1], matrix[2], scratchColumn));
result.y = Cartesian3.magnitude(Cartesian3.fromElements(matrix[3], matrix[4], matrix[5], scratchColumn));
result.z = Cartesian3.magnitude(Cartesian3.fromElements(matrix[6], matrix[7], matrix[8], scratchColumn));
return result;
};
var scratchScale = new Cartesian3();
/**
* Computes the maximum scale assuming the matrix is an affine transformation.
* The maximum scale is the maximum length of the column vectors.
*
* @param {Matrix3} matrix The matrix.
* @returns {Number} The maximum scale.
*/
Matrix3.getMaximumScale = function(matrix) {
Matrix3.getScale(matrix, scratchScale);
return Cartesian3.maximumComponent(scratchScale);
};
/**
* Computes the product of two matrices.
*
* @param {Matrix3} left The first matrix.
* @param {Matrix3} right The second matrix.
* @param {Matrix3} result The object onto which to store the result.
* @returns {Matrix3} The modified result parameter.
*/
Matrix3.multiply = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var column0Row0 = left[0] * right[0] + left[3] * right[1] + left[6] * right[2];
var column0Row1 = left[1] * right[0] + left[4] * right[1] + left[7] * right[2];
var column0Row2 = left[2] * right[0] + left[5] * right[1] + left[8] * right[2];
var column1Row0 = left[0] * right[3] + left[3] * right[4] + left[6] * right[5];
var column1Row1 = left[1] * right[3] + left[4] * right[4] + left[7] * right[5];
var column1Row2 = left[2] * right[3] + left[5] * right[4] + left[8] * right[5];
var column2Row0 = left[0] * right[6] + left[3] * right[7] + left[6] * right[8];
var column2Row1 = left[1] * right[6] + left[4] * right[7] + left[7] * right[8];
var column2Row2 = left[2] * right[6] + left[5] * right[7] + left[8] * right[8];
result[0] = column0Row0;
result[1] = column0Row1;
result[2] = column0Row2;
result[3] = column1Row0;
result[4] = column1Row1;
result[5] = column1Row2;
result[6] = column2Row0;
result[7] = column2Row1;
result[8] = column2Row2;
return result;
};
/**
* Computes the sum of two matrices.
*
* @param {Matrix3} left The first matrix.
* @param {Matrix3} right The second matrix.
* @param {Matrix3} result The object onto which to store the result.
* @returns {Matrix3} The modified result parameter.
*/
Matrix3.add = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = left[0] + right[0];
result[1] = left[1] + right[1];
result[2] = left[2] + right[2];
result[3] = left[3] + right[3];
result[4] = left[4] + right[4];
result[5] = left[5] + right[5];
result[6] = left[6] + right[6];
result[7] = left[7] + right[7];
result[8] = left[8] + right[8];
return result;
};
/**
* Computes the difference of two matrices.
*
* @param {Matrix3} left The first matrix.
* @param {Matrix3} right The second matrix.
* @param {Matrix3} result The object onto which to store the result.
* @returns {Matrix3} The modified result parameter.
*/
Matrix3.subtract = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = left[0] - right[0];
result[1] = left[1] - right[1];
result[2] = left[2] - right[2];
result[3] = left[3] - right[3];
result[4] = left[4] - right[4];
result[5] = left[5] - right[5];
result[6] = left[6] - right[6];
result[7] = left[7] - right[7];
result[8] = left[8] - right[8];
return result;
};
/**
* Computes the product of a matrix and a column vector.
*
* @param {Matrix3} matrix The matrix.
* @param {Cartesian3} cartesian The column.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Matrix3.multiplyByVector = function(matrix, cartesian, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var vX = cartesian.x;
var vY = cartesian.y;
var vZ = cartesian.z;
var x = matrix[0] * vX + matrix[3] * vY + matrix[6] * vZ;
var y = matrix[1] * vX + matrix[4] * vY + matrix[7] * vZ;
var z = matrix[2] * vX + matrix[5] * vY + matrix[8] * vZ;
result.x = x;
result.y = y;
result.z = z;
return result;
};
/**
* Computes the product of a matrix and a scalar.
*
* @param {Matrix3} matrix The matrix.
* @param {Number} scalar The number to multiply by.
* @param {Matrix3} result The object onto which to store the result.
* @returns {Matrix3} The modified result parameter.
*/
Matrix3.multiplyByScalar = function(matrix, scalar, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (typeof scalar !== 'number') {
throw new DeveloperError('scalar must be a number');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = matrix[0] * scalar;
result[1] = matrix[1] * scalar;
result[2] = matrix[2] * scalar;
result[3] = matrix[3] * scalar;
result[4] = matrix[4] * scalar;
result[5] = matrix[5] * scalar;
result[6] = matrix[6] * scalar;
result[7] = matrix[7] * scalar;
result[8] = matrix[8] * scalar;
return result;
};
/**
* Computes the product of a matrix times a (non-uniform) scale, as if the scale were a scale matrix.
*
* @param {Matrix3} matrix The matrix on the left-hand side.
* @param {Cartesian3} scale The non-uniform scale on the right-hand side.
* @param {Matrix3} result The object onto which to store the result.
* @returns {Matrix3} The modified result parameter.
*
*
* @example
* // Instead of Cesium.Matrix3.multiply(m, Cesium.Matrix3.fromScale(scale), m);
* Cesium.Matrix3.multiplyByScale(m, scale, m);
*
* @see Matrix3.fromScale
* @see Matrix3.multiplyByUniformScale
*/
Matrix3.multiplyByScale = function(matrix, scale, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(scale)) {
throw new DeveloperError('scale is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = matrix[0] * scale.x;
result[1] = matrix[1] * scale.x;
result[2] = matrix[2] * scale.x;
result[3] = matrix[3] * scale.y;
result[4] = matrix[4] * scale.y;
result[5] = matrix[5] * scale.y;
result[6] = matrix[6] * scale.z;
result[7] = matrix[7] * scale.z;
result[8] = matrix[8] * scale.z;
return result;
};
/**
* Creates a negated copy of the provided matrix.
*
* @param {Matrix3} matrix The matrix to negate.
* @param {Matrix3} result The object onto which to store the result.
* @returns {Matrix3} The modified result parameter.
*/
Matrix3.negate = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = -matrix[0];
result[1] = -matrix[1];
result[2] = -matrix[2];
result[3] = -matrix[3];
result[4] = -matrix[4];
result[5] = -matrix[5];
result[6] = -matrix[6];
result[7] = -matrix[7];
result[8] = -matrix[8];
return result;
};
/**
* Computes the transpose of the provided matrix.
*
* @param {Matrix3} matrix The matrix to transpose.
* @param {Matrix3} result The object onto which to store the result.
* @returns {Matrix3} The modified result parameter.
*/
Matrix3.transpose = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var column0Row0 = matrix[0];
var column0Row1 = matrix[3];
var column0Row2 = matrix[6];
var column1Row0 = matrix[1];
var column1Row1 = matrix[4];
var column1Row2 = matrix[7];
var column2Row0 = matrix[2];
var column2Row1 = matrix[5];
var column2Row2 = matrix[8];
result[0] = column0Row0;
result[1] = column0Row1;
result[2] = column0Row2;
result[3] = column1Row0;
result[4] = column1Row1;
result[5] = column1Row2;
result[6] = column2Row0;
result[7] = column2Row1;
result[8] = column2Row2;
return result;
};
function computeFrobeniusNorm(matrix) {
var norm = 0.0;
for (var i = 0; i < 9; ++i) {
var temp = matrix[i];
norm += temp * temp;
}
return Math.sqrt(norm);
}
var rowVal = [1, 0, 0];
var colVal = [2, 2, 1];
function offDiagonalFrobeniusNorm(matrix) {
// Computes the "off-diagonal" Frobenius norm.
// Assumes matrix is symmetric.
var norm = 0.0;
for (var i = 0; i < 3; ++i) {
var temp = matrix[Matrix3.getElementIndex(colVal[i], rowVal[i])];
norm += 2.0 * temp * temp;
}
return Math.sqrt(norm);
}
function shurDecomposition(matrix, result) {
// This routine was created based upon Matrix Computations, 3rd ed., by Golub and Van Loan,
// section 8.4.2 The 2by2 Symmetric Schur Decomposition.
//
// The routine takes a matrix, which is assumed to be symmetric, and
// finds the largest off-diagonal term, and then creates
// a matrix (result) which can be used to help reduce it
var tolerance = CesiumMath.EPSILON15;
var maxDiagonal = 0.0;
var rotAxis = 1;
// find pivot (rotAxis) based on max diagonal of matrix
for (var i = 0; i < 3; ++i) {
var temp = Math.abs(matrix[Matrix3.getElementIndex(colVal[i], rowVal[i])]);
if (temp > maxDiagonal) {
rotAxis = i;
maxDiagonal = temp;
}
}
var c = 1.0;
var s = 0.0;
var p = rowVal[rotAxis];
var q = colVal[rotAxis];
if (Math.abs(matrix[Matrix3.getElementIndex(q, p)]) > tolerance) {
var qq = matrix[Matrix3.getElementIndex(q, q)];
var pp = matrix[Matrix3.getElementIndex(p, p)];
var qp = matrix[Matrix3.getElementIndex(q, p)];
var tau = (qq - pp) / 2.0 / qp;
var t;
if (tau < 0.0) {
t = -1.0 / (-tau + Math.sqrt(1.0 + tau * tau));
} else {
t = 1.0 / (tau + Math.sqrt(1.0 + tau * tau));
}
c = 1.0 / Math.sqrt(1.0 + t * t);
s = t * c;
}
result = Matrix3.clone(Matrix3.IDENTITY, result);
result[Matrix3.getElementIndex(p, p)] = result[Matrix3.getElementIndex(q, q)] = c;
result[Matrix3.getElementIndex(q, p)] = s;
result[Matrix3.getElementIndex(p, q)] = -s;
return result;
}
var jMatrix = new Matrix3();
var jMatrixTranspose = new Matrix3();
/**
* Computes the eigenvectors and eigenvalues of a symmetric matrix.
*
* Returns a diagonal matrix and unitary matrix such that:
* matrix = unitary matrix * diagonal matrix * transpose(unitary matrix)
*
*
* The values along the diagonal of the diagonal matrix are the eigenvalues. The columns
* of the unitary matrix are the corresponding eigenvectors.
*
*
* @param {Matrix3} matrix The matrix to decompose into diagonal and unitary matrix. Expected to be symmetric.
* @param {Object} [result] An object with unitary and diagonal properties which are matrices onto which to store the result.
* @returns {Object} An object with unitary and diagonal properties which are the unitary and diagonal matrices, respectively.
*
* @example
* var a = //... symetric matrix
* var result = {
* unitary : new Cesium.Matrix3(),
* diagonal : new Cesium.Matrix3()
* };
* Cesium.Matrix3.computeEigenDecomposition(a, result);
*
* var unitaryTranspose = Cesium.Matrix3.transpose(result.unitary, new Cesium.Matrix3());
* var b = Cesium.Matrix3.multiply(result.unitary, result.diagonal, new Cesium.Matrix3());
* Cesium.Matrix3.multiply(b, unitaryTranspose, b); // b is now equal to a
*
* var lambda = Cesium.Matrix3.getColumn(result.diagonal, 0, new Cesium.Cartesian3()).x; // first eigenvalue
* var v = Cesium.Matrix3.getColumn(result.unitary, 0, new Cesium.Cartesian3()); // first eigenvector
* var c = Cesium.Cartesian3.multiplyByScalar(v, lambda, new Cesium.Cartesian3()); // equal to Cesium.Matrix3.multiplyByVector(a, v)
*/
Matrix3.computeEigenDecomposition = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required.');
}
// This routine was created based upon Matrix Computations, 3rd ed., by Golub and Van Loan,
// section 8.4.3 The Classical Jacobi Algorithm
var tolerance = CesiumMath.EPSILON20;
var maxSweeps = 10;
var count = 0;
var sweep = 0;
if (!defined(result)) {
result = {};
}
var unitaryMatrix = result.unitary = Matrix3.clone(Matrix3.IDENTITY, result.unitary);
var diagMatrix = result.diagonal = Matrix3.clone(matrix, result.diagonal);
var epsilon = tolerance * computeFrobeniusNorm(diagMatrix);
while (sweep < maxSweeps && offDiagonalFrobeniusNorm(diagMatrix) > epsilon) {
shurDecomposition(diagMatrix, jMatrix);
Matrix3.transpose(jMatrix, jMatrixTranspose);
Matrix3.multiply(diagMatrix, jMatrix, diagMatrix);
Matrix3.multiply(jMatrixTranspose, diagMatrix, diagMatrix);
Matrix3.multiply(unitaryMatrix, jMatrix, unitaryMatrix);
if (++count > 2) {
++sweep;
count = 0;
}
}
return result;
};
/**
* Computes a matrix, which contains the absolute (unsigned) values of the provided matrix's elements.
*
* @param {Matrix3} matrix The matrix with signed elements.
* @param {Matrix3} result The object onto which to store the result.
* @returns {Matrix3} The modified result parameter.
*/
Matrix3.abs = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = Math.abs(matrix[0]);
result[1] = Math.abs(matrix[1]);
result[2] = Math.abs(matrix[2]);
result[3] = Math.abs(matrix[3]);
result[4] = Math.abs(matrix[4]);
result[5] = Math.abs(matrix[5]);
result[6] = Math.abs(matrix[6]);
result[7] = Math.abs(matrix[7]);
result[8] = Math.abs(matrix[8]);
return result;
};
/**
* Computes the determinant of the provided matrix.
*
* @param {Matrix3} matrix The matrix to use.
* @returns {Number} The value of the determinant of the matrix.
*/
Matrix3.determinant = function(matrix) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
var m11 = matrix[0];
var m21 = matrix[3];
var m31 = matrix[6];
var m12 = matrix[1];
var m22 = matrix[4];
var m32 = matrix[7];
var m13 = matrix[2];
var m23 = matrix[5];
var m33 = matrix[8];
return m11 * (m22 * m33 - m23 * m32) + m12 * (m23 * m31 - m21 * m33) + m13 * (m21 * m32 - m22 * m31);
};
/**
* Computes the inverse of the provided matrix.
*
* @param {Matrix3} matrix The matrix to invert.
* @param {Matrix3} result The object onto which to store the result.
* @returns {Matrix3} The modified result parameter.
*
* @exception {DeveloperError} matrix is not invertible.
*/
Matrix3.inverse = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var m11 = matrix[0];
var m21 = matrix[1];
var m31 = matrix[2];
var m12 = matrix[3];
var m22 = matrix[4];
var m32 = matrix[5];
var m13 = matrix[6];
var m23 = matrix[7];
var m33 = matrix[8];
var determinant = Matrix3.determinant(matrix);
if (Math.abs(determinant) <= CesiumMath.EPSILON15) {
throw new DeveloperError('matrix is not invertible');
}
result[0] = m22 * m33 - m23 * m32;
result[1] = m23 * m31 - m21 * m33;
result[2] = m21 * m32 - m22 * m31;
result[3] = m13 * m32 - m12 * m33;
result[4] = m11 * m33 - m13 * m31;
result[5] = m12 * m31 - m11 * m32;
result[6] = m12 * m23 - m13 * m22;
result[7] = m13 * m21 - m11 * m23;
result[8] = m11 * m22 - m12 * m21;
var scale = 1.0 / determinant;
return Matrix3.multiplyByScalar(result, scale, result);
};
/**
* Compares the provided matrices componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Matrix3} [left] The first matrix.
* @param {Matrix3} [right] The second matrix.
* @returns {Boolean} true if left and right are equal, false otherwise.
*/
Matrix3.equals = function(left, right) {
return (left === right) ||
(defined(left) &&
defined(right) &&
left[0] === right[0] &&
left[1] === right[1] &&
left[2] === right[2] &&
left[3] === right[3] &&
left[4] === right[4] &&
left[5] === right[5] &&
left[6] === right[6] &&
left[7] === right[7] &&
left[8] === right[8]);
};
/**
* Compares the provided matrices componentwise and returns
* true if they are within the provided epsilon,
* false otherwise.
*
* @param {Matrix3} [left] The first matrix.
* @param {Matrix3} [right] The second matrix.
* @param {Number} epsilon The epsilon to use for equality testing.
* @returns {Boolean} true if left and right are within the provided epsilon, false otherwise.
*/
Matrix3.equalsEpsilon = function(left, right, epsilon) {
if (typeof epsilon !== 'number') {
throw new DeveloperError('epsilon must be a number');
}
return (left === right) ||
(defined(left) &&
defined(right) &&
Math.abs(left[0] - right[0]) <= epsilon &&
Math.abs(left[1] - right[1]) <= epsilon &&
Math.abs(left[2] - right[2]) <= epsilon &&
Math.abs(left[3] - right[3]) <= epsilon &&
Math.abs(left[4] - right[4]) <= epsilon &&
Math.abs(left[5] - right[5]) <= epsilon &&
Math.abs(left[6] - right[6]) <= epsilon &&
Math.abs(left[7] - right[7]) <= epsilon &&
Math.abs(left[8] - right[8]) <= epsilon);
};
/**
* An immutable Matrix3 instance initialized to the identity matrix.
*
* @type {Matrix3}
* @constant
*/
Matrix3.IDENTITY = freezeObject(new Matrix3(1.0, 0.0, 0.0,
0.0, 1.0, 0.0,
0.0, 0.0, 1.0));
/**
* An immutable Matrix3 instance initialized to the zero matrix.
*
* @type {Matrix3}
* @constant
*/
Matrix3.ZERO = freezeObject(new Matrix3(0.0, 0.0, 0.0,
0.0, 0.0, 0.0,
0.0, 0.0, 0.0));
/**
* The index into Matrix3 for column 0, row 0.
*
* @type {Number}
* @constant
*/
Matrix3.COLUMN0ROW0 = 0;
/**
* The index into Matrix3 for column 0, row 1.
*
* @type {Number}
* @constant
*/
Matrix3.COLUMN0ROW1 = 1;
/**
* The index into Matrix3 for column 0, row 2.
*
* @type {Number}
* @constant
*/
Matrix3.COLUMN0ROW2 = 2;
/**
* The index into Matrix3 for column 1, row 0.
*
* @type {Number}
* @constant
*/
Matrix3.COLUMN1ROW0 = 3;
/**
* The index into Matrix3 for column 1, row 1.
*
* @type {Number}
* @constant
*/
Matrix3.COLUMN1ROW1 = 4;
/**
* The index into Matrix3 for column 1, row 2.
*
* @type {Number}
* @constant
*/
Matrix3.COLUMN1ROW2 = 5;
/**
* The index into Matrix3 for column 2, row 0.
*
* @type {Number}
* @constant
*/
Matrix3.COLUMN2ROW0 = 6;
/**
* The index into Matrix3 for column 2, row 1.
*
* @type {Number}
* @constant
*/
Matrix3.COLUMN2ROW1 = 7;
/**
* The index into Matrix3 for column 2, row 2.
*
* @type {Number}
* @constant
*/
Matrix3.COLUMN2ROW2 = 8;
defineProperties(Matrix3.prototype, {
/**
* Gets the number of items in the collection.
* @memberof Matrix3.prototype
*
* @type {Number}
*/
length : {
get : function() {
return Matrix3.packedLength;
}
}
});
/**
* Duplicates the provided Matrix3 instance.
*
* @param {Matrix3} [result] The object onto which to store the result.
* @returns {Matrix3} The modified result parameter or a new Matrix3 instance if one was not provided.
*/
Matrix3.prototype.clone = function(result) {
return Matrix3.clone(this, result);
};
/**
* Compares this matrix to the provided matrix componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Matrix3} [right] The right hand side matrix.
* @returns {Boolean} true if they are equal, false otherwise.
*/
Matrix3.prototype.equals = function(right) {
return Matrix3.equals(this, right);
};
/**
* @private
*/
Matrix3.equalsArray = function(matrix, array, offset) {
return matrix[0] === array[offset] &&
matrix[1] === array[offset + 1] &&
matrix[2] === array[offset + 2] &&
matrix[3] === array[offset + 3] &&
matrix[4] === array[offset + 4] &&
matrix[5] === array[offset + 5] &&
matrix[6] === array[offset + 6] &&
matrix[7] === array[offset + 7] &&
matrix[8] === array[offset + 8];
};
/**
* Compares this matrix to the provided matrix componentwise and returns
* true if they are within the provided epsilon,
* false otherwise.
*
* @param {Matrix3} [right] The right hand side matrix.
* @param {Number} epsilon The epsilon to use for equality testing.
* @returns {Boolean} true if they are within the provided epsilon, false otherwise.
*/
Matrix3.prototype.equalsEpsilon = function(right, epsilon) {
return Matrix3.equalsEpsilon(this, right, epsilon);
};
/**
* Creates a string representing this Matrix with each row being
* on a separate line and in the format '(column0, column1, column2)'.
*
* @returns {String} A string representing the provided Matrix with each row being on a separate line and in the format '(column0, column1, column2)'.
*/
Matrix3.prototype.toString = function() {
return '(' + this[0] + ', ' + this[3] + ', ' + this[6] + ')\n' +
'(' + this[1] + ', ' + this[4] + ', ' + this[7] + ')\n' +
'(' + this[2] + ', ' + this[5] + ', ' + this[8] + ')';
};
return Matrix3;
});
/*global define*/
define('Core/Cartesian4',[
'./defaultValue',
'./defined',
'./DeveloperError',
'./freezeObject',
'./Math'
], function(
defaultValue,
defined,
DeveloperError,
freezeObject,
CesiumMath) {
'use strict';
/**
* A 4D Cartesian point.
* @alias Cartesian4
* @constructor
*
* @param {Number} [x=0.0] The X component.
* @param {Number} [y=0.0] The Y component.
* @param {Number} [z=0.0] The Z component.
* @param {Number} [w=0.0] The W component.
*
* @see Cartesian2
* @see Cartesian3
* @see Packable
*/
function Cartesian4(x, y, z, w) {
/**
* The X component.
* @type {Number}
* @default 0.0
*/
this.x = defaultValue(x, 0.0);
/**
* The Y component.
* @type {Number}
* @default 0.0
*/
this.y = defaultValue(y, 0.0);
/**
* The Z component.
* @type {Number}
* @default 0.0
*/
this.z = defaultValue(z, 0.0);
/**
* The W component.
* @type {Number}
* @default 0.0
*/
this.w = defaultValue(w, 0.0);
}
/**
* Creates a Cartesian4 instance from x, y, z and w coordinates.
*
* @param {Number} x The x coordinate.
* @param {Number} y The y coordinate.
* @param {Number} z The z coordinate.
* @param {Number} w The w coordinate.
* @param {Cartesian4} [result] The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter or a new Cartesian4 instance if one was not provided.
*/
Cartesian4.fromElements = function(x, y, z, w, result) {
if (!defined(result)) {
return new Cartesian4(x, y, z, w);
}
result.x = x;
result.y = y;
result.z = z;
result.w = w;
return result;
};
/**
* Creates a Cartesian4 instance from a {@link Color}. red, green, blue,
* and alpha map to x, y, z, and w, respectively.
*
* @param {Color} color The source color.
* @param {Cartesian4} [result] The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter or a new Cartesian4 instance if one was not provided.
*/
Cartesian4.fromColor = function(color, result) {
if (!defined(color)) {
throw new DeveloperError('color is required');
}
if (!defined(result)) {
return new Cartesian4(color.red, color.green, color.blue, color.alpha);
}
result.x = color.red;
result.y = color.green;
result.z = color.blue;
result.w = color.alpha;
return result;
};
/**
* Duplicates a Cartesian4 instance.
*
* @param {Cartesian4} cartesian The Cartesian to duplicate.
* @param {Cartesian4} [result] The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter or a new Cartesian4 instance if one was not provided. (Returns undefined if cartesian is undefined)
*/
Cartesian4.clone = function(cartesian, result) {
if (!defined(cartesian)) {
return undefined;
}
if (!defined(result)) {
return new Cartesian4(cartesian.x, cartesian.y, cartesian.z, cartesian.w);
}
result.x = cartesian.x;
result.y = cartesian.y;
result.z = cartesian.z;
result.w = cartesian.w;
return result;
};
/**
* The number of elements used to pack the object into an array.
* @type {Number}
*/
Cartesian4.packedLength = 4;
/**
* Stores the provided instance into the provided array.
*
* @param {Cartesian4} value The value to pack.
* @param {Number[]} array The array to pack into.
* @param {Number} [startingIndex=0] The index into the array at which to start packing the elements.
*
* @returns {Number[]} The array that was packed into
*/
Cartesian4.pack = function(value, array, startingIndex) {
if (!defined(value)) {
throw new DeveloperError('value is required');
}
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
array[startingIndex++] = value.x;
array[startingIndex++] = value.y;
array[startingIndex++] = value.z;
array[startingIndex] = value.w;
return array;
};
/**
* Retrieves an instance from a packed array.
*
* @param {Number[]} array The packed array.
* @param {Number} [startingIndex=0] The starting index of the element to be unpacked.
* @param {Cartesian4} [result] The object into which to store the result.
* @returns {Cartesian4} The modified result parameter or a new Cartesian4 instance if one was not provided.
*/
Cartesian4.unpack = function(array, startingIndex, result) {
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
if (!defined(result)) {
result = new Cartesian4();
}
result.x = array[startingIndex++];
result.y = array[startingIndex++];
result.z = array[startingIndex++];
result.w = array[startingIndex];
return result;
};
/**
* Flattens an array of Cartesian4s into and array of components.
*
* @param {Cartesian4[]} array The array of cartesians to pack.
* @param {Number[]} result The array onto which to store the result.
* @returns {Number[]} The packed array.
*/
Cartesian4.packArray = function(array, result) {
if (!defined(array)) {
throw new DeveloperError('array is required');
}
var length = array.length;
if (!defined(result)) {
result = new Array(length * 4);
} else {
result.length = length * 4;
}
for (var i = 0; i < length; ++i) {
Cartesian4.pack(array[i], result, i * 4);
}
return result;
};
/**
* Unpacks an array of cartesian components into and array of Cartesian4s.
*
* @param {Number[]} array The array of components to unpack.
* @param {Cartesian4[]} result The array onto which to store the result.
* @returns {Cartesian4[]} The unpacked array.
*/
Cartesian4.unpackArray = function(array, result) {
if (!defined(array)) {
throw new DeveloperError('array is required');
}
var length = array.length;
if (!defined(result)) {
result = new Array(length / 4);
} else {
result.length = length / 4;
}
for (var i = 0; i < length; i += 4) {
var index = i / 4;
result[index] = Cartesian4.unpack(array, i, result[index]);
}
return result;
};
/**
* Creates a Cartesian4 from four consecutive elements in an array.
* @function
*
* @param {Number[]} array The array whose four consecutive elements correspond to the x, y, z, and w components, respectively.
* @param {Number} [startingIndex=0] The offset into the array of the first element, which corresponds to the x component.
* @param {Cartesian4} [result] The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter or a new Cartesian4 instance if one was not provided.
*
* @example
* // Create a Cartesian4 with (1.0, 2.0, 3.0, 4.0)
* var v = [1.0, 2.0, 3.0, 4.0];
* var p = Cesium.Cartesian4.fromArray(v);
*
* // Create a Cartesian4 with (1.0, 2.0, 3.0, 4.0) using an offset into an array
* var v2 = [0.0, 0.0, 1.0, 2.0, 3.0, 4.0];
* var p2 = Cesium.Cartesian4.fromArray(v2, 2);
*/
Cartesian4.fromArray = Cartesian4.unpack;
/**
* Computes the value of the maximum component for the supplied Cartesian.
*
* @param {Cartesian4} cartesian The cartesian to use.
* @returns {Number} The value of the maximum component.
*/
Cartesian4.maximumComponent = function(cartesian) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
return Math.max(cartesian.x, cartesian.y, cartesian.z, cartesian.w);
};
/**
* Computes the value of the minimum component for the supplied Cartesian.
*
* @param {Cartesian4} cartesian The cartesian to use.
* @returns {Number} The value of the minimum component.
*/
Cartesian4.minimumComponent = function(cartesian) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
return Math.min(cartesian.x, cartesian.y, cartesian.z, cartesian.w);
};
/**
* Compares two Cartesians and computes a Cartesian which contains the minimum components of the supplied Cartesians.
*
* @param {Cartesian4} first A cartesian to compare.
* @param {Cartesian4} second A cartesian to compare.
* @param {Cartesian4} result The object into which to store the result.
* @returns {Cartesian4} A cartesian with the minimum components.
*/
Cartesian4.minimumByComponent = function(first, second, result) {
if (!defined(first)) {
throw new DeveloperError('first is required.');
}
if (!defined(second)) {
throw new DeveloperError('second is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required.');
}
result.x = Math.min(first.x, second.x);
result.y = Math.min(first.y, second.y);
result.z = Math.min(first.z, second.z);
result.w = Math.min(first.w, second.w);
return result;
};
/**
* Compares two Cartesians and computes a Cartesian which contains the maximum components of the supplied Cartesians.
*
* @param {Cartesian4} first A cartesian to compare.
* @param {Cartesian4} second A cartesian to compare.
* @param {Cartesian4} result The object into which to store the result.
* @returns {Cartesian4} A cartesian with the maximum components.
*/
Cartesian4.maximumByComponent = function(first, second, result) {
if (!defined(first)) {
throw new DeveloperError('first is required.');
}
if (!defined(second)) {
throw new DeveloperError('second is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required.');
}
result.x = Math.max(first.x, second.x);
result.y = Math.max(first.y, second.y);
result.z = Math.max(first.z, second.z);
result.w = Math.max(first.w, second.w);
return result;
};
/**
* Computes the provided Cartesian's squared magnitude.
*
* @param {Cartesian4} cartesian The Cartesian instance whose squared magnitude is to be computed.
* @returns {Number} The squared magnitude.
*/
Cartesian4.magnitudeSquared = function(cartesian) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
return cartesian.x * cartesian.x + cartesian.y * cartesian.y + cartesian.z * cartesian.z + cartesian.w * cartesian.w;
};
/**
* Computes the Cartesian's magnitude (length).
*
* @param {Cartesian4} cartesian The Cartesian instance whose magnitude is to be computed.
* @returns {Number} The magnitude.
*/
Cartesian4.magnitude = function(cartesian) {
return Math.sqrt(Cartesian4.magnitudeSquared(cartesian));
};
var distanceScratch = new Cartesian4();
/**
* Computes the 4-space distance between two points.
*
* @param {Cartesian4} left The first point to compute the distance from.
* @param {Cartesian4} right The second point to compute the distance to.
* @returns {Number} The distance between two points.
*
* @example
* // Returns 1.0
* var d = Cesium.Cartesian4.distance(
* new Cesium.Cartesian4(1.0, 0.0, 0.0, 0.0),
* new Cesium.Cartesian4(2.0, 0.0, 0.0, 0.0));
*/
Cartesian4.distance = function(left, right) {
if (!defined(left) || !defined(right)) {
throw new DeveloperError('left and right are required.');
}
Cartesian4.subtract(left, right, distanceScratch);
return Cartesian4.magnitude(distanceScratch);
};
/**
* Computes the squared distance between two points. Comparing squared distances
* using this function is more efficient than comparing distances using {@link Cartesian4#distance}.
*
* @param {Cartesian4} left The first point to compute the distance from.
* @param {Cartesian4} right The second point to compute the distance to.
* @returns {Number} The distance between two points.
*
* @example
* // Returns 4.0, not 2.0
* var d = Cesium.Cartesian4.distance(
* new Cesium.Cartesian4(1.0, 0.0, 0.0, 0.0),
* new Cesium.Cartesian4(3.0, 0.0, 0.0, 0.0));
*/
Cartesian4.distanceSquared = function(left, right) {
if (!defined(left) || !defined(right)) {
throw new DeveloperError('left and right are required.');
}
Cartesian4.subtract(left, right, distanceScratch);
return Cartesian4.magnitudeSquared(distanceScratch);
};
/**
* Computes the normalized form of the supplied Cartesian.
*
* @param {Cartesian4} cartesian The Cartesian to be normalized.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*/
Cartesian4.normalize = function(cartesian, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var magnitude = Cartesian4.magnitude(cartesian);
result.x = cartesian.x / magnitude;
result.y = cartesian.y / magnitude;
result.z = cartesian.z / magnitude;
result.w = cartesian.w / magnitude;
if (isNaN(result.x) || isNaN(result.y) || isNaN(result.z) || isNaN(result.w)) {
throw new DeveloperError('normalized result is not a number');
}
return result;
};
/**
* Computes the dot (scalar) product of two Cartesians.
*
* @param {Cartesian4} left The first Cartesian.
* @param {Cartesian4} right The second Cartesian.
* @returns {Number} The dot product.
*/
Cartesian4.dot = function(left, right) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
return left.x * right.x + left.y * right.y + left.z * right.z + left.w * right.w;
};
/**
* Computes the componentwise product of two Cartesians.
*
* @param {Cartesian4} left The first Cartesian.
* @param {Cartesian4} right The second Cartesian.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*/
Cartesian4.multiplyComponents = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = left.x * right.x;
result.y = left.y * right.y;
result.z = left.z * right.z;
result.w = left.w * right.w;
return result;
};
/**
* Computes the componentwise quotient of two Cartesians.
*
* @param {Cartesian4} left The first Cartesian.
* @param {Cartesian4} right The second Cartesian.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*/
Cartesian4.divideComponents = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = left.x / right.x;
result.y = left.y / right.y;
result.z = left.z / right.z;
result.w = left.w / right.w;
return result;
};
/**
* Computes the componentwise sum of two Cartesians.
*
* @param {Cartesian4} left The first Cartesian.
* @param {Cartesian4} right The second Cartesian.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*/
Cartesian4.add = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = left.x + right.x;
result.y = left.y + right.y;
result.z = left.z + right.z;
result.w = left.w + right.w;
return result;
};
/**
* Computes the componentwise difference of two Cartesians.
*
* @param {Cartesian4} left The first Cartesian.
* @param {Cartesian4} right The second Cartesian.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*/
Cartesian4.subtract = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = left.x - right.x;
result.y = left.y - right.y;
result.z = left.z - right.z;
result.w = left.w - right.w;
return result;
};
/**
* Multiplies the provided Cartesian componentwise by the provided scalar.
*
* @param {Cartesian4} cartesian The Cartesian to be scaled.
* @param {Number} scalar The scalar to multiply with.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*/
Cartesian4.multiplyByScalar = function(cartesian, scalar, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (typeof scalar !== 'number') {
throw new DeveloperError('scalar is required and must be a number.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = cartesian.x * scalar;
result.y = cartesian.y * scalar;
result.z = cartesian.z * scalar;
result.w = cartesian.w * scalar;
return result;
};
/**
* Divides the provided Cartesian componentwise by the provided scalar.
*
* @param {Cartesian4} cartesian The Cartesian to be divided.
* @param {Number} scalar The scalar to divide by.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*/
Cartesian4.divideByScalar = function(cartesian, scalar, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (typeof scalar !== 'number') {
throw new DeveloperError('scalar is required and must be a number.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = cartesian.x / scalar;
result.y = cartesian.y / scalar;
result.z = cartesian.z / scalar;
result.w = cartesian.w / scalar;
return result;
};
/**
* Negates the provided Cartesian.
*
* @param {Cartesian4} cartesian The Cartesian to be negated.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*/
Cartesian4.negate = function(cartesian, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = -cartesian.x;
result.y = -cartesian.y;
result.z = -cartesian.z;
result.w = -cartesian.w;
return result;
};
/**
* Computes the absolute value of the provided Cartesian.
*
* @param {Cartesian4} cartesian The Cartesian whose absolute value is to be computed.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*/
Cartesian4.abs = function(cartesian, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = Math.abs(cartesian.x);
result.y = Math.abs(cartesian.y);
result.z = Math.abs(cartesian.z);
result.w = Math.abs(cartesian.w);
return result;
};
var lerpScratch = new Cartesian4();
/**
* Computes the linear interpolation or extrapolation at t using the provided cartesians.
*
* @param {Cartesian4} start The value corresponding to t at 0.0.
* @param {Cartesian4}end The value corresponding to t at 1.0.
* @param {Number} t The point along t at which to interpolate.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*/
Cartesian4.lerp = function(start, end, t, result) {
if (!defined(start)) {
throw new DeveloperError('start is required.');
}
if (!defined(end)) {
throw new DeveloperError('end is required.');
}
if (typeof t !== 'number') {
throw new DeveloperError('t is required and must be a number.');
}
if (!defined(result)) {
throw new DeveloperError('result is required.');
}
Cartesian4.multiplyByScalar(end, t, lerpScratch);
result = Cartesian4.multiplyByScalar(start, 1.0 - t, result);
return Cartesian4.add(lerpScratch, result, result);
};
var mostOrthogonalAxisScratch = new Cartesian4();
/**
* Returns the axis that is most orthogonal to the provided Cartesian.
*
* @param {Cartesian4} cartesian The Cartesian on which to find the most orthogonal axis.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The most orthogonal axis.
*/
Cartesian4.mostOrthogonalAxis = function(cartesian, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required.');
}
var f = Cartesian4.normalize(cartesian, mostOrthogonalAxisScratch);
Cartesian4.abs(f, f);
if (f.x <= f.y) {
if (f.x <= f.z) {
if (f.x <= f.w) {
result = Cartesian4.clone(Cartesian4.UNIT_X, result);
} else {
result = Cartesian4.clone(Cartesian4.UNIT_W, result);
}
} else if (f.z <= f.w) {
result = Cartesian4.clone(Cartesian4.UNIT_Z, result);
} else {
result = Cartesian4.clone(Cartesian4.UNIT_W, result);
}
} else if (f.y <= f.z) {
if (f.y <= f.w) {
result = Cartesian4.clone(Cartesian4.UNIT_Y, result);
} else {
result = Cartesian4.clone(Cartesian4.UNIT_W, result);
}
} else if (f.z <= f.w) {
result = Cartesian4.clone(Cartesian4.UNIT_Z, result);
} else {
result = Cartesian4.clone(Cartesian4.UNIT_W, result);
}
return result;
};
/**
* Compares the provided Cartesians componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Cartesian4} [left] The first Cartesian.
* @param {Cartesian4} [right] The second Cartesian.
* @returns {Boolean} true if left and right are equal, false otherwise.
*/
Cartesian4.equals = function(left, right) {
return (left === right) ||
((defined(left)) &&
(defined(right)) &&
(left.x === right.x) &&
(left.y === right.y) &&
(left.z === right.z) &&
(left.w === right.w));
};
/**
* @private
*/
Cartesian4.equalsArray = function(cartesian, array, offset) {
return cartesian.x === array[offset] &&
cartesian.y === array[offset + 1] &&
cartesian.z === array[offset + 2] &&
cartesian.w === array[offset + 3];
};
/**
* Compares the provided Cartesians componentwise and returns
* true if they pass an absolute or relative tolerance test,
* false otherwise.
*
* @param {Cartesian4} [left] The first Cartesian.
* @param {Cartesian4} [right] The second Cartesian.
* @param {Number} relativeEpsilon The relative epsilon tolerance to use for equality testing.
* @param {Number} [absoluteEpsilon=relativeEpsilon] The absolute epsilon tolerance to use for equality testing.
* @returns {Boolean} true if left and right are within the provided epsilon, false otherwise.
*/
Cartesian4.equalsEpsilon = function(left, right, relativeEpsilon, absoluteEpsilon) {
return (left === right) ||
(defined(left) &&
defined(right) &&
CesiumMath.equalsEpsilon(left.x, right.x, relativeEpsilon, absoluteEpsilon) &&
CesiumMath.equalsEpsilon(left.y, right.y, relativeEpsilon, absoluteEpsilon) &&
CesiumMath.equalsEpsilon(left.z, right.z, relativeEpsilon, absoluteEpsilon) &&
CesiumMath.equalsEpsilon(left.w, right.w, relativeEpsilon, absoluteEpsilon));
};
/**
* An immutable Cartesian4 instance initialized to (0.0, 0.0, 0.0, 0.0).
*
* @type {Cartesian4}
* @constant
*/
Cartesian4.ZERO = freezeObject(new Cartesian4(0.0, 0.0, 0.0, 0.0));
/**
* An immutable Cartesian4 instance initialized to (1.0, 0.0, 0.0, 0.0).
*
* @type {Cartesian4}
* @constant
*/
Cartesian4.UNIT_X = freezeObject(new Cartesian4(1.0, 0.0, 0.0, 0.0));
/**
* An immutable Cartesian4 instance initialized to (0.0, 1.0, 0.0, 0.0).
*
* @type {Cartesian4}
* @constant
*/
Cartesian4.UNIT_Y = freezeObject(new Cartesian4(0.0, 1.0, 0.0, 0.0));
/**
* An immutable Cartesian4 instance initialized to (0.0, 0.0, 1.0, 0.0).
*
* @type {Cartesian4}
* @constant
*/
Cartesian4.UNIT_Z = freezeObject(new Cartesian4(0.0, 0.0, 1.0, 0.0));
/**
* An immutable Cartesian4 instance initialized to (0.0, 0.0, 0.0, 1.0).
*
* @type {Cartesian4}
* @constant
*/
Cartesian4.UNIT_W = freezeObject(new Cartesian4(0.0, 0.0, 0.0, 1.0));
/**
* Duplicates this Cartesian4 instance.
*
* @param {Cartesian4} [result] The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter or a new Cartesian4 instance if one was not provided.
*/
Cartesian4.prototype.clone = function(result) {
return Cartesian4.clone(this, result);
};
/**
* Compares this Cartesian against the provided Cartesian componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Cartesian4} [right] The right hand side Cartesian.
* @returns {Boolean} true if they are equal, false otherwise.
*/
Cartesian4.prototype.equals = function(right) {
return Cartesian4.equals(this, right);
};
/**
* Compares this Cartesian against the provided Cartesian componentwise and returns
* true if they pass an absolute or relative tolerance test,
* false otherwise.
*
* @param {Cartesian4} [right] The right hand side Cartesian.
* @param {Number} relativeEpsilon The relative epsilon tolerance to use for equality testing.
* @param {Number} [absoluteEpsilon=relativeEpsilon] The absolute epsilon tolerance to use for equality testing.
* @returns {Boolean} true if they are within the provided epsilon, false otherwise.
*/
Cartesian4.prototype.equalsEpsilon = function(right, relativeEpsilon, absoluteEpsilon) {
return Cartesian4.equalsEpsilon(this, right, relativeEpsilon, absoluteEpsilon);
};
/**
* Creates a string representing this Cartesian in the format '(x, y)'.
*
* @returns {String} A string representing the provided Cartesian in the format '(x, y)'.
*/
Cartesian4.prototype.toString = function() {
return '(' + this.x + ', ' + this.y + ', ' + this.z + ', ' + this.w + ')';
};
return Cartesian4;
});
/*global define*/
define('Core/RuntimeError',[
'./defined'
], function(
defined) {
'use strict';
/**
* Constructs an exception object that is thrown due to an error that can occur at runtime, e.g.,
* out of memory, could not compile shader, etc. If a function may throw this
* exception, the calling code should be prepared to catch it.
*
* On the other hand, a {@link DeveloperError} indicates an exception due
* to a developer error, e.g., invalid argument, that usually indicates a bug in the
* calling code.
*
* @alias RuntimeError
* @constructor
* @extends Error
*
* @param {String} [message] The error message for this exception.
*
* @see DeveloperError
*/
function RuntimeError(message) {
/**
* 'RuntimeError' indicating that this exception was thrown due to a runtime error.
* @type {String}
* @readonly
*/
this.name = 'RuntimeError';
/**
* The explanation for why this exception was thrown.
* @type {String}
* @readonly
*/
this.message = message;
//Browsers such as IE don't have a stack property until you actually throw the error.
var stack;
try {
throw new Error();
} catch (e) {
stack = e.stack;
}
/**
* The stack trace of this exception, if available.
* @type {String}
* @readonly
*/
this.stack = stack;
}
if (defined(Object.create)) {
RuntimeError.prototype = Object.create(Error.prototype);
RuntimeError.prototype.constructor = RuntimeError;
}
RuntimeError.prototype.toString = function() {
var str = this.name + ': ' + this.message;
if (defined(this.stack)) {
str += '\n' + this.stack.toString();
}
return str;
};
return RuntimeError;
});
/*global define*/
define('Core/Matrix4',[
'./Cartesian3',
'./Cartesian4',
'./defaultValue',
'./defined',
'./defineProperties',
'./DeveloperError',
'./freezeObject',
'./Math',
'./Matrix3',
'./RuntimeError'
], function(
Cartesian3,
Cartesian4,
defaultValue,
defined,
defineProperties,
DeveloperError,
freezeObject,
CesiumMath,
Matrix3,
RuntimeError) {
'use strict';
/**
* A 4x4 matrix, indexable as a column-major order array.
* Constructor parameters are in row-major order for code readability.
* @alias Matrix4
* @constructor
*
* @param {Number} [column0Row0=0.0] The value for column 0, row 0.
* @param {Number} [column1Row0=0.0] The value for column 1, row 0.
* @param {Number} [column2Row0=0.0] The value for column 2, row 0.
* @param {Number} [column3Row0=0.0] The value for column 3, row 0.
* @param {Number} [column0Row1=0.0] The value for column 0, row 1.
* @param {Number} [column1Row1=0.0] The value for column 1, row 1.
* @param {Number} [column2Row1=0.0] The value for column 2, row 1.
* @param {Number} [column3Row1=0.0] The value for column 3, row 1.
* @param {Number} [column0Row2=0.0] The value for column 0, row 2.
* @param {Number} [column1Row2=0.0] The value for column 1, row 2.
* @param {Number} [column2Row2=0.0] The value for column 2, row 2.
* @param {Number} [column3Row2=0.0] The value for column 3, row 2.
* @param {Number} [column0Row3=0.0] The value for column 0, row 3.
* @param {Number} [column1Row3=0.0] The value for column 1, row 3.
* @param {Number} [column2Row3=0.0] The value for column 2, row 3.
* @param {Number} [column3Row3=0.0] The value for column 3, row 3.
*
* @see Matrix4.fromColumnMajorArray
* @see Matrix4.fromRowMajorArray
* @see Matrix4.fromRotationTranslation
* @see Matrix4.fromTranslationRotationScale
* @see Matrix4.fromTranslationQuaternionRotationScale
* @see Matrix4.fromTranslation
* @see Matrix4.fromScale
* @see Matrix4.fromUniformScale
* @see Matrix4.fromCamera
* @see Matrix4.computePerspectiveFieldOfView
* @see Matrix4.computeOrthographicOffCenter
* @see Matrix4.computePerspectiveOffCenter
* @see Matrix4.computeInfinitePerspectiveOffCenter
* @see Matrix4.computeViewportTransformation
* @see Matrix4.computeView
* @see Matrix2
* @see Matrix3
* @see Packable
*/
function Matrix4(column0Row0, column1Row0, column2Row0, column3Row0,
column0Row1, column1Row1, column2Row1, column3Row1,
column0Row2, column1Row2, column2Row2, column3Row2,
column0Row3, column1Row3, column2Row3, column3Row3) {
this[0] = defaultValue(column0Row0, 0.0);
this[1] = defaultValue(column0Row1, 0.0);
this[2] = defaultValue(column0Row2, 0.0);
this[3] = defaultValue(column0Row3, 0.0);
this[4] = defaultValue(column1Row0, 0.0);
this[5] = defaultValue(column1Row1, 0.0);
this[6] = defaultValue(column1Row2, 0.0);
this[7] = defaultValue(column1Row3, 0.0);
this[8] = defaultValue(column2Row0, 0.0);
this[9] = defaultValue(column2Row1, 0.0);
this[10] = defaultValue(column2Row2, 0.0);
this[11] = defaultValue(column2Row3, 0.0);
this[12] = defaultValue(column3Row0, 0.0);
this[13] = defaultValue(column3Row1, 0.0);
this[14] = defaultValue(column3Row2, 0.0);
this[15] = defaultValue(column3Row3, 0.0);
}
/**
* The number of elements used to pack the object into an array.
* @type {Number}
*/
Matrix4.packedLength = 16;
/**
* Stores the provided instance into the provided array.
*
* @param {Matrix4} value The value to pack.
* @param {Number[]} array The array to pack into.
* @param {Number} [startingIndex=0] The index into the array at which to start packing the elements.
*
* @returns {Number[]} The array that was packed into
*/
Matrix4.pack = function(value, array, startingIndex) {
if (!defined(value)) {
throw new DeveloperError('value is required');
}
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
array[startingIndex++] = value[0];
array[startingIndex++] = value[1];
array[startingIndex++] = value[2];
array[startingIndex++] = value[3];
array[startingIndex++] = value[4];
array[startingIndex++] = value[5];
array[startingIndex++] = value[6];
array[startingIndex++] = value[7];
array[startingIndex++] = value[8];
array[startingIndex++] = value[9];
array[startingIndex++] = value[10];
array[startingIndex++] = value[11];
array[startingIndex++] = value[12];
array[startingIndex++] = value[13];
array[startingIndex++] = value[14];
array[startingIndex] = value[15];
return array;
};
/**
* Retrieves an instance from a packed array.
*
* @param {Number[]} array The packed array.
* @param {Number} [startingIndex=0] The starting index of the element to be unpacked.
* @param {Matrix4} [result] The object into which to store the result.
* @returns {Matrix4} The modified result parameter or a new Matrix4 instance if one was not provided.
*/
Matrix4.unpack = function(array, startingIndex, result) {
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
if (!defined(result)) {
result = new Matrix4();
}
result[0] = array[startingIndex++];
result[1] = array[startingIndex++];
result[2] = array[startingIndex++];
result[3] = array[startingIndex++];
result[4] = array[startingIndex++];
result[5] = array[startingIndex++];
result[6] = array[startingIndex++];
result[7] = array[startingIndex++];
result[8] = array[startingIndex++];
result[9] = array[startingIndex++];
result[10] = array[startingIndex++];
result[11] = array[startingIndex++];
result[12] = array[startingIndex++];
result[13] = array[startingIndex++];
result[14] = array[startingIndex++];
result[15] = array[startingIndex];
return result;
};
/**
* Duplicates a Matrix4 instance.
*
* @param {Matrix4} matrix The matrix to duplicate.
* @param {Matrix4} [result] The object onto which to store the result.
* @returns {Matrix4} The modified result parameter or a new Matrix4 instance if one was not provided. (Returns undefined if matrix is undefined)
*/
Matrix4.clone = function(matrix, result) {
if (!defined(matrix)) {
return undefined;
}
if (!defined(result)) {
return new Matrix4(matrix[0], matrix[4], matrix[8], matrix[12],
matrix[1], matrix[5], matrix[9], matrix[13],
matrix[2], matrix[6], matrix[10], matrix[14],
matrix[3], matrix[7], matrix[11], matrix[15]);
}
result[0] = matrix[0];
result[1] = matrix[1];
result[2] = matrix[2];
result[3] = matrix[3];
result[4] = matrix[4];
result[5] = matrix[5];
result[6] = matrix[6];
result[7] = matrix[7];
result[8] = matrix[8];
result[9] = matrix[9];
result[10] = matrix[10];
result[11] = matrix[11];
result[12] = matrix[12];
result[13] = matrix[13];
result[14] = matrix[14];
result[15] = matrix[15];
return result;
};
/**
* Creates a Matrix4 from 16 consecutive elements in an array.
* @function
*
* @param {Number[]} array The array whose 16 consecutive elements correspond to the positions of the matrix. Assumes column-major order.
* @param {Number} [startingIndex=0] The offset into the array of the first element, which corresponds to first column first row position in the matrix.
* @param {Matrix4} [result] The object onto which to store the result.
* @returns {Matrix4} The modified result parameter or a new Matrix4 instance if one was not provided.
*
* @example
* // Create the Matrix4:
* // [1.0, 2.0, 3.0, 4.0]
* // [1.0, 2.0, 3.0, 4.0]
* // [1.0, 2.0, 3.0, 4.0]
* // [1.0, 2.0, 3.0, 4.0]
*
* var v = [1.0, 1.0, 1.0, 1.0, 2.0, 2.0, 2.0, 2.0, 3.0, 3.0, 3.0, 3.0, 4.0, 4.0, 4.0, 4.0];
* var m = Cesium.Matrix4.fromArray(v);
*
* // Create same Matrix4 with using an offset into an array
* var v2 = [0.0, 0.0, 1.0, 1.0, 1.0, 1.0, 2.0, 2.0, 2.0, 2.0, 3.0, 3.0, 3.0, 3.0, 4.0, 4.0, 4.0, 4.0];
* var m2 = Cesium.Matrix4.fromArray(v2, 2);
*/
Matrix4.fromArray = Matrix4.unpack;
/**
* Computes a Matrix4 instance from a column-major order array.
*
* @param {Number[]} values The column-major order array.
* @param {Matrix4} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix4} The modified result parameter, or a new Matrix4 instance if one was not provided.
*/
Matrix4.fromColumnMajorArray = function(values, result) {
if (!defined(values)) {
throw new DeveloperError('values is required');
}
return Matrix4.clone(values, result);
};
/**
* Computes a Matrix4 instance from a row-major order array.
* The resulting matrix will be in column-major order.
*
* @param {Number[]} values The row-major order array.
* @param {Matrix4} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix4} The modified result parameter, or a new Matrix4 instance if one was not provided.
*/
Matrix4.fromRowMajorArray = function(values, result) {
if (!defined(values)) {
throw new DeveloperError('values is required.');
}
if (!defined(result)) {
return new Matrix4(values[0], values[1], values[2], values[3],
values[4], values[5], values[6], values[7],
values[8], values[9], values[10], values[11],
values[12], values[13], values[14], values[15]);
}
result[0] = values[0];
result[1] = values[4];
result[2] = values[8];
result[3] = values[12];
result[4] = values[1];
result[5] = values[5];
result[6] = values[9];
result[7] = values[13];
result[8] = values[2];
result[9] = values[6];
result[10] = values[10];
result[11] = values[14];
result[12] = values[3];
result[13] = values[7];
result[14] = values[11];
result[15] = values[15];
return result;
};
/**
* Computes a Matrix4 instance from a Matrix3 representing the rotation
* and a Cartesian3 representing the translation.
*
* @param {Matrix3} rotation The upper left portion of the matrix representing the rotation.
* @param {Cartesian3} [translation=Cartesian3.ZERO] The upper right portion of the matrix representing the translation.
* @param {Matrix4} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix4} The modified result parameter, or a new Matrix4 instance if one was not provided.
*/
Matrix4.fromRotationTranslation = function(rotation, translation, result) {
if (!defined(rotation)) {
throw new DeveloperError('rotation is required.');
}
translation = defaultValue(translation, Cartesian3.ZERO);
if (!defined(result)) {
return new Matrix4(rotation[0], rotation[3], rotation[6], translation.x,
rotation[1], rotation[4], rotation[7], translation.y,
rotation[2], rotation[5], rotation[8], translation.z,
0.0, 0.0, 0.0, 1.0);
}
result[0] = rotation[0];
result[1] = rotation[1];
result[2] = rotation[2];
result[3] = 0.0;
result[4] = rotation[3];
result[5] = rotation[4];
result[6] = rotation[5];
result[7] = 0.0;
result[8] = rotation[6];
result[9] = rotation[7];
result[10] = rotation[8];
result[11] = 0.0;
result[12] = translation.x;
result[13] = translation.y;
result[14] = translation.z;
result[15] = 1.0;
return result;
};
/**
* Computes a Matrix4 instance from a translation, rotation, and scale (TRS)
* representation with the rotation represented as a quaternion.
*
* @param {Cartesian3} translation The translation transformation.
* @param {Quaternion} rotation The rotation transformation.
* @param {Cartesian3} scale The non-uniform scale transformation.
* @param {Matrix4} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix4} The modified result parameter, or a new Matrix4 instance if one was not provided.
*
* @example
* var result = Cesium.Matrix4.fromTranslationQuaternionRotationScale(
* new Cesium.Cartesian3(1.0, 2.0, 3.0), // translation
* Cesium.Quaternion.IDENTITY, // rotation
* new Cesium.Cartesian3(7.0, 8.0, 9.0), // scale
* result);
*/
Matrix4.fromTranslationQuaternionRotationScale = function(translation, rotation, scale, result) {
if (!defined(translation)) {
throw new DeveloperError('translation is required.');
}
if (!defined(rotation)) {
throw new DeveloperError('rotation is required.');
}
if (!defined(scale)) {
throw new DeveloperError('scale is required.');
}
if (!defined(result)) {
result = new Matrix4();
}
var scaleX = scale.x;
var scaleY = scale.y;
var scaleZ = scale.z;
var x2 = rotation.x * rotation.x;
var xy = rotation.x * rotation.y;
var xz = rotation.x * rotation.z;
var xw = rotation.x * rotation.w;
var y2 = rotation.y * rotation.y;
var yz = rotation.y * rotation.z;
var yw = rotation.y * rotation.w;
var z2 = rotation.z * rotation.z;
var zw = rotation.z * rotation.w;
var w2 = rotation.w * rotation.w;
var m00 = x2 - y2 - z2 + w2;
var m01 = 2.0 * (xy - zw);
var m02 = 2.0 * (xz + yw);
var m10 = 2.0 * (xy + zw);
var m11 = -x2 + y2 - z2 + w2;
var m12 = 2.0 * (yz - xw);
var m20 = 2.0 * (xz - yw);
var m21 = 2.0 * (yz + xw);
var m22 = -x2 - y2 + z2 + w2;
result[0] = m00 * scaleX;
result[1] = m10 * scaleX;
result[2] = m20 * scaleX;
result[3] = 0.0;
result[4] = m01 * scaleY;
result[5] = m11 * scaleY;
result[6] = m21 * scaleY;
result[7] = 0.0;
result[8] = m02 * scaleZ;
result[9] = m12 * scaleZ;
result[10] = m22 * scaleZ;
result[11] = 0.0;
result[12] = translation.x;
result[13] = translation.y;
result[14] = translation.z;
result[15] = 1.0;
return result;
};
/**
* Creates a Matrix4 instance from a {@link TranslationRotationScale} instance.
*
* @param {TranslationRotationScale} translationRotationScale The instance.
* @param {Matrix4} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix4} The modified result parameter, or a new Matrix4 instance if one was not provided.
*/
Matrix4.fromTranslationRotationScale = function(translationRotationScale, result) {
if (!defined(translationRotationScale)) {
throw new DeveloperError('translationRotationScale is required.');
}
return Matrix4.fromTranslationQuaternionRotationScale(translationRotationScale.translation, translationRotationScale.rotation, translationRotationScale.scale, result);
};
/**
* Creates a Matrix4 instance from a Cartesian3 representing the translation.
*
* @param {Cartesian3} translation The upper right portion of the matrix representing the translation.
* @param {Matrix4} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix4} The modified result parameter, or a new Matrix4 instance if one was not provided.
*
* @see Matrix4.multiplyByTranslation
*/
Matrix4.fromTranslation = function(translation, result) {
if (!defined(translation)) {
throw new DeveloperError('translation is required.');
}
return Matrix4.fromRotationTranslation(Matrix3.IDENTITY, translation, result);
};
/**
* Computes a Matrix4 instance representing a non-uniform scale.
*
* @param {Cartesian3} scale The x, y, and z scale factors.
* @param {Matrix4} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix4} The modified result parameter, or a new Matrix4 instance if one was not provided.
*
* @example
* // Creates
* // [7.0, 0.0, 0.0, 0.0]
* // [0.0, 8.0, 0.0, 0.0]
* // [0.0, 0.0, 9.0, 0.0]
* // [0.0, 0.0, 0.0, 1.0]
* var m = Cesium.Matrix4.fromScale(new Cesium.Cartesian3(7.0, 8.0, 9.0));
*/
Matrix4.fromScale = function(scale, result) {
if (!defined(scale)) {
throw new DeveloperError('scale is required.');
}
if (!defined(result)) {
return new Matrix4(
scale.x, 0.0, 0.0, 0.0,
0.0, scale.y, 0.0, 0.0,
0.0, 0.0, scale.z, 0.0,
0.0, 0.0, 0.0, 1.0);
}
result[0] = scale.x;
result[1] = 0.0;
result[2] = 0.0;
result[3] = 0.0;
result[4] = 0.0;
result[5] = scale.y;
result[6] = 0.0;
result[7] = 0.0;
result[8] = 0.0;
result[9] = 0.0;
result[10] = scale.z;
result[11] = 0.0;
result[12] = 0.0;
result[13] = 0.0;
result[14] = 0.0;
result[15] = 1.0;
return result;
};
/**
* Computes a Matrix4 instance representing a uniform scale.
*
* @param {Number} scale The uniform scale factor.
* @param {Matrix4} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix4} The modified result parameter, or a new Matrix4 instance if one was not provided.
*
* @example
* // Creates
* // [2.0, 0.0, 0.0, 0.0]
* // [0.0, 2.0, 0.0, 0.0]
* // [0.0, 0.0, 2.0, 0.0]
* // [0.0, 0.0, 0.0, 1.0]
* var m = Cesium.Matrix4.fromUniformScale(2.0);
*/
Matrix4.fromUniformScale = function(scale, result) {
if (typeof scale !== 'number') {
throw new DeveloperError('scale is required.');
}
if (!defined(result)) {
return new Matrix4(scale, 0.0, 0.0, 0.0,
0.0, scale, 0.0, 0.0,
0.0, 0.0, scale, 0.0,
0.0, 0.0, 0.0, 1.0);
}
result[0] = scale;
result[1] = 0.0;
result[2] = 0.0;
result[3] = 0.0;
result[4] = 0.0;
result[5] = scale;
result[6] = 0.0;
result[7] = 0.0;
result[8] = 0.0;
result[9] = 0.0;
result[10] = scale;
result[11] = 0.0;
result[12] = 0.0;
result[13] = 0.0;
result[14] = 0.0;
result[15] = 1.0;
return result;
};
var fromCameraF = new Cartesian3();
var fromCameraR = new Cartesian3();
var fromCameraU = new Cartesian3();
/**
* Computes a Matrix4 instance from a Camera.
*
* @param {Camera} camera The camera to use.
* @param {Matrix4} [result] The object in which the result will be stored, if undefined a new instance will be created.
* @returns {Matrix4} The modified result parameter, or a new Matrix4 instance if one was not provided.
*/
Matrix4.fromCamera = function(camera, result) {
if (!defined(camera)) {
throw new DeveloperError('camera is required.');
}
var position = camera.position;
var direction = camera.direction;
var up = camera.up;
if (!defined(position)) {
throw new DeveloperError('camera.position is required.');
}
if (!defined(direction)) {
throw new DeveloperError('camera.direction is required.');
}
if (!defined(up)) {
throw new DeveloperError('camera.up is required.');
}
Cartesian3.normalize(direction, fromCameraF);
Cartesian3.normalize(Cartesian3.cross(fromCameraF, up, fromCameraR), fromCameraR);
Cartesian3.normalize(Cartesian3.cross(fromCameraR, fromCameraF, fromCameraU), fromCameraU);
var sX = fromCameraR.x;
var sY = fromCameraR.y;
var sZ = fromCameraR.z;
var fX = fromCameraF.x;
var fY = fromCameraF.y;
var fZ = fromCameraF.z;
var uX = fromCameraU.x;
var uY = fromCameraU.y;
var uZ = fromCameraU.z;
var positionX = position.x;
var positionY = position.y;
var positionZ = position.z;
var t0 = sX * -positionX + sY * -positionY+ sZ * -positionZ;
var t1 = uX * -positionX + uY * -positionY+ uZ * -positionZ;
var t2 = fX * positionX + fY * positionY + fZ * positionZ;
// The code below this comment is an optimized
// version of the commented lines.
// Rather that create two matrices and then multiply,
// we just bake in the multiplcation as part of creation.
// var rotation = new Matrix4(
// sX, sY, sZ, 0.0,
// uX, uY, uZ, 0.0,
// -fX, -fY, -fZ, 0.0,
// 0.0, 0.0, 0.0, 1.0);
// var translation = new Matrix4(
// 1.0, 0.0, 0.0, -position.x,
// 0.0, 1.0, 0.0, -position.y,
// 0.0, 0.0, 1.0, -position.z,
// 0.0, 0.0, 0.0, 1.0);
// return rotation.multiply(translation);
if (!defined(result)) {
return new Matrix4(
sX, sY, sZ, t0,
uX, uY, uZ, t1,
-fX, -fY, -fZ, t2,
0.0, 0.0, 0.0, 1.0);
}
result[0] = sX;
result[1] = uX;
result[2] = -fX;
result[3] = 0.0;
result[4] = sY;
result[5] = uY;
result[6] = -fY;
result[7] = 0.0;
result[8] = sZ;
result[9] = uZ;
result[10] = -fZ;
result[11] = 0.0;
result[12] = t0;
result[13] = t1;
result[14] = t2;
result[15] = 1.0;
return result;
};
/**
* Computes a Matrix4 instance representing a perspective transformation matrix.
*
* @param {Number} fovY The field of view along the Y axis in radians.
* @param {Number} aspectRatio The aspect ratio.
* @param {Number} near The distance to the near plane in meters.
* @param {Number} far The distance to the far plane in meters.
* @param {Matrix4} result The object in which the result will be stored.
* @returns {Matrix4} The modified result parameter.
*
* @exception {DeveloperError} fovY must be in (0, PI].
* @exception {DeveloperError} aspectRatio must be greater than zero.
* @exception {DeveloperError} near must be greater than zero.
* @exception {DeveloperError} far must be greater than zero.
*/
Matrix4.computePerspectiveFieldOfView = function(fovY, aspectRatio, near, far, result) {
if (fovY <= 0.0 || fovY > Math.PI) {
throw new DeveloperError('fovY must be in (0, PI].');
}
if (aspectRatio <= 0.0) {
throw new DeveloperError('aspectRatio must be greater than zero.');
}
if (near <= 0.0) {
throw new DeveloperError('near must be greater than zero.');
}
if (far <= 0.0) {
throw new DeveloperError('far must be greater than zero.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var bottom = Math.tan(fovY * 0.5);
var column1Row1 = 1.0 / bottom;
var column0Row0 = column1Row1 / aspectRatio;
var column2Row2 = (far + near) / (near - far);
var column3Row2 = (2.0 * far * near) / (near - far);
result[0] = column0Row0;
result[1] = 0.0;
result[2] = 0.0;
result[3] = 0.0;
result[4] = 0.0;
result[5] = column1Row1;
result[6] = 0.0;
result[7] = 0.0;
result[8] = 0.0;
result[9] = 0.0;
result[10] = column2Row2;
result[11] = -1.0;
result[12] = 0.0;
result[13] = 0.0;
result[14] = column3Row2;
result[15] = 0.0;
return result;
};
/**
* Computes a Matrix4 instance representing an orthographic transformation matrix.
*
* @param {Number} left The number of meters to the left of the camera that will be in view.
* @param {Number} right The number of meters to the right of the camera that will be in view.
* @param {Number} bottom The number of meters below of the camera that will be in view.
* @param {Number} top The number of meters above of the camera that will be in view.
* @param {Number} near The distance to the near plane in meters.
* @param {Number} far The distance to the far plane in meters.
* @param {Matrix4} result The object in which the result will be stored.
* @returns {Matrix4} The modified result parameter.
*/
Matrix4.computeOrthographicOffCenter = function(left, right, bottom, top, near, far, result) {
if (!defined(left)) {
throw new DeveloperError('left is required.');
}
if (!defined(right)) {
throw new DeveloperError('right is required.');
}
if (!defined(bottom)) {
throw new DeveloperError('bottom is required.');
}
if (!defined(top)) {
throw new DeveloperError('top is required.');
}
if (!defined(near)) {
throw new DeveloperError('near is required.');
}
if (!defined(far)) {
throw new DeveloperError('far is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var a = 1.0 / (right - left);
var b = 1.0 / (top - bottom);
var c = 1.0 / (far - near);
var tx = -(right + left) * a;
var ty = -(top + bottom) * b;
var tz = -(far + near) * c;
a *= 2.0;
b *= 2.0;
c *= -2.0;
result[0] = a;
result[1] = 0.0;
result[2] = 0.0;
result[3] = 0.0;
result[4] = 0.0;
result[5] = b;
result[6] = 0.0;
result[7] = 0.0;
result[8] = 0.0;
result[9] = 0.0;
result[10] = c;
result[11] = 0.0;
result[12] = tx;
result[13] = ty;
result[14] = tz;
result[15] = 1.0;
return result;
};
/**
* Computes a Matrix4 instance representing an off center perspective transformation.
*
* @param {Number} left The number of meters to the left of the camera that will be in view.
* @param {Number} right The number of meters to the right of the camera that will be in view.
* @param {Number} bottom The number of meters below of the camera that will be in view.
* @param {Number} top The number of meters above of the camera that will be in view.
* @param {Number} near The distance to the near plane in meters.
* @param {Number} far The distance to the far plane in meters.
* @param {Matrix4} result The object in which the result will be stored.
* @returns {Matrix4} The modified result parameter.
*/
Matrix4.computePerspectiveOffCenter = function(left, right, bottom, top, near, far, result) {
if (!defined(left)) {
throw new DeveloperError('left is required.');
}
if (!defined(right)) {
throw new DeveloperError('right is required.');
}
if (!defined(bottom)) {
throw new DeveloperError('bottom is required.');
}
if (!defined(top)) {
throw new DeveloperError('top is required.');
}
if (!defined(near)) {
throw new DeveloperError('near is required.');
}
if (!defined(far)) {
throw new DeveloperError('far is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var column0Row0 = 2.0 * near / (right - left);
var column1Row1 = 2.0 * near / (top - bottom);
var column2Row0 = (right + left) / (right - left);
var column2Row1 = (top + bottom) / (top - bottom);
var column2Row2 = -(far + near) / (far - near);
var column2Row3 = -1.0;
var column3Row2 = -2.0 * far * near / (far - near);
result[0] = column0Row0;
result[1] = 0.0;
result[2] = 0.0;
result[3] = 0.0;
result[4] = 0.0;
result[5] = column1Row1;
result[6] = 0.0;
result[7] = 0.0;
result[8] = column2Row0;
result[9] = column2Row1;
result[10] = column2Row2;
result[11] = column2Row3;
result[12] = 0.0;
result[13] = 0.0;
result[14] = column3Row2;
result[15] = 0.0;
return result;
};
/**
* Computes a Matrix4 instance representing an infinite off center perspective transformation.
*
* @param {Number} left The number of meters to the left of the camera that will be in view.
* @param {Number} right The number of meters to the right of the camera that will be in view.
* @param {Number} bottom The number of meters below of the camera that will be in view.
* @param {Number} top The number of meters above of the camera that will be in view.
* @param {Number} near The distance to the near plane in meters.
* @param {Matrix4} result The object in which the result will be stored.
* @returns {Matrix4} The modified result parameter.
*/
Matrix4.computeInfinitePerspectiveOffCenter = function(left, right, bottom, top, near, result) {
if (!defined(left)) {
throw new DeveloperError('left is required.');
}
if (!defined(right)) {
throw new DeveloperError('right is required.');
}
if (!defined(bottom)) {
throw new DeveloperError('bottom is required.');
}
if (!defined(top)) {
throw new DeveloperError('top is required.');
}
if (!defined(near)) {
throw new DeveloperError('near is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var column0Row0 = 2.0 * near / (right - left);
var column1Row1 = 2.0 * near / (top - bottom);
var column2Row0 = (right + left) / (right - left);
var column2Row1 = (top + bottom) / (top - bottom);
var column2Row2 = -1.0;
var column2Row3 = -1.0;
var column3Row2 = -2.0 * near;
result[0] = column0Row0;
result[1] = 0.0;
result[2] = 0.0;
result[3] = 0.0;
result[4] = 0.0;
result[5] = column1Row1;
result[6] = 0.0;
result[7] = 0.0;
result[8] = column2Row0;
result[9] = column2Row1;
result[10] = column2Row2;
result[11] = column2Row3;
result[12] = 0.0;
result[13] = 0.0;
result[14] = column3Row2;
result[15] = 0.0;
return result;
};
/**
* Computes a Matrix4 instance that transforms from normalized device coordinates to window coordinates.
*
* @param {Object}[viewport = { x : 0.0, y : 0.0, width : 0.0, height : 0.0 }] The viewport's corners as shown in Example 1.
* @param {Number}[nearDepthRange=0.0] The near plane distance in window coordinates.
* @param {Number}[farDepthRange=1.0] The far plane distance in window coordinates.
* @param {Matrix4} result The object in which the result will be stored.
* @returns {Matrix4} The modified result parameter.
*
* @example
* // Create viewport transformation using an explicit viewport and depth range.
* var m = Cesium.Matrix4.computeViewportTransformation({
* x : 0.0,
* y : 0.0,
* width : 1024.0,
* height : 768.0
* }, 0.0, 1.0, new Cesium.Matrix4());
*/
Matrix4.computeViewportTransformation = function(viewport, nearDepthRange, farDepthRange, result) {
if (!defined(result)) {
throw new DeveloperError('result is required');
}
viewport = defaultValue(viewport, defaultValue.EMPTY_OBJECT);
var x = defaultValue(viewport.x, 0.0);
var y = defaultValue(viewport.y, 0.0);
var width = defaultValue(viewport.width, 0.0);
var height = defaultValue(viewport.height, 0.0);
nearDepthRange = defaultValue(nearDepthRange, 0.0);
farDepthRange = defaultValue(farDepthRange, 1.0);
var halfWidth = width * 0.5;
var halfHeight = height * 0.5;
var halfDepth = (farDepthRange - nearDepthRange) * 0.5;
var column0Row0 = halfWidth;
var column1Row1 = halfHeight;
var column2Row2 = halfDepth;
var column3Row0 = x + halfWidth;
var column3Row1 = y + halfHeight;
var column3Row2 = nearDepthRange + halfDepth;
var column3Row3 = 1.0;
result[0] = column0Row0;
result[1] = 0.0;
result[2] = 0.0;
result[3] = 0.0;
result[4] = 0.0;
result[5] = column1Row1;
result[6] = 0.0;
result[7] = 0.0;
result[8] = 0.0;
result[9] = 0.0;
result[10] = column2Row2;
result[11] = 0.0;
result[12] = column3Row0;
result[13] = column3Row1;
result[14] = column3Row2;
result[15] = column3Row3;
return result;
};
/**
* Computes a Matrix4 instance that transforms from world space to view space.
*
* @param {Cartesian3} position The position of the camera.
* @param {Cartesian3} direction The forward direction.
* @param {Cartesian3} up The up direction.
* @param {Cartesian3} right The right direction.
* @param {Matrix4} result The object in which the result will be stored.
* @returns {Matrix4} The modified result parameter.
*/
Matrix4.computeView = function(position, direction, up, right, result) {
if (!defined(position)) {
throw new DeveloperError('position is required');
}
if (!defined(direction)) {
throw new DeveloperError('direction is required');
}
if (!defined(up)) {
throw new DeveloperError('up is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = right.x;
result[1] = up.x;
result[2] = -direction.x;
result[3] = 0.0;
result[4] = right.y;
result[5] = up.y;
result[6] = -direction.y;
result[7] = 0.0;
result[8] = right.z;
result[9] = up.z;
result[10] = -direction.z;
result[11] = 0.0;
result[12] = -Cartesian3.dot(right, position);
result[13] = -Cartesian3.dot(up, position);
result[14] = Cartesian3.dot(direction, position);
result[15] = 1.0;
return result;
};
/**
* Computes an Array from the provided Matrix4 instance.
* The array will be in column-major order.
*
* @param {Matrix4} matrix The matrix to use..
* @param {Number[]} [result] The Array onto which to store the result.
* @returns {Number[]} The modified Array parameter or a new Array instance if one was not provided.
*
* @example
* //create an array from an instance of Matrix4
* // m = [10.0, 14.0, 18.0, 22.0]
* // [11.0, 15.0, 19.0, 23.0]
* // [12.0, 16.0, 20.0, 24.0]
* // [13.0, 17.0, 21.0, 25.0]
* var a = Cesium.Matrix4.toArray(m);
*
* // m remains the same
* //creates a = [10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 16.0, 17.0, 18.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0]
*/
Matrix4.toArray = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
return [matrix[0], matrix[1], matrix[2], matrix[3],
matrix[4], matrix[5], matrix[6], matrix[7],
matrix[8], matrix[9], matrix[10], matrix[11],
matrix[12], matrix[13], matrix[14], matrix[15]];
}
result[0] = matrix[0];
result[1] = matrix[1];
result[2] = matrix[2];
result[3] = matrix[3];
result[4] = matrix[4];
result[5] = matrix[5];
result[6] = matrix[6];
result[7] = matrix[7];
result[8] = matrix[8];
result[9] = matrix[9];
result[10] = matrix[10];
result[11] = matrix[11];
result[12] = matrix[12];
result[13] = matrix[13];
result[14] = matrix[14];
result[15] = matrix[15];
return result;
};
/**
* Computes the array index of the element at the provided row and column.
*
* @param {Number} row The zero-based index of the row.
* @param {Number} column The zero-based index of the column.
* @returns {Number} The index of the element at the provided row and column.
*
* @exception {DeveloperError} row must be 0, 1, 2, or 3.
* @exception {DeveloperError} column must be 0, 1, 2, or 3.
*
* @example
* var myMatrix = new Cesium.Matrix4();
* var column1Row0Index = Cesium.Matrix4.getElementIndex(1, 0);
* var column1Row0 = myMatrix[column1Row0Index];
* myMatrix[column1Row0Index] = 10.0;
*/
Matrix4.getElementIndex = function(column, row) {
if (typeof row !== 'number' || row < 0 || row > 3) {
throw new DeveloperError('row must be 0, 1, 2, or 3.');
}
if (typeof column !== 'number' || column < 0 || column > 3) {
throw new DeveloperError('column must be 0, 1, 2, or 3.');
}
return column * 4 + row;
};
/**
* Retrieves a copy of the matrix column at the provided index as a Cartesian4 instance.
*
* @param {Matrix4} matrix The matrix to use.
* @param {Number} index The zero-based index of the column to retrieve.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*
* @exception {DeveloperError} index must be 0, 1, 2, or 3.
*
* @example
* //returns a Cartesian4 instance with values from the specified column
* // m = [10.0, 11.0, 12.0, 13.0]
* // [14.0, 15.0, 16.0, 17.0]
* // [18.0, 19.0, 20.0, 21.0]
* // [22.0, 23.0, 24.0, 25.0]
*
* //Example 1: Creates an instance of Cartesian
* var a = Cesium.Matrix4.getColumn(m, 2, new Cesium.Cartesian4());
*
* @example
* //Example 2: Sets values for Cartesian instance
* var a = new Cesium.Cartesian4();
* Cesium.Matrix4.getColumn(m, 2, a);
*
* // a.x = 12.0; a.y = 16.0; a.z = 20.0; a.w = 24.0;
*/
Matrix4.getColumn = function(matrix, index, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required.');
}
if (typeof index !== 'number' || index < 0 || index > 3) {
throw new DeveloperError('index must be 0, 1, 2, or 3.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var startIndex = index * 4;
var x = matrix[startIndex];
var y = matrix[startIndex + 1];
var z = matrix[startIndex + 2];
var w = matrix[startIndex + 3];
result.x = x;
result.y = y;
result.z = z;
result.w = w;
return result;
};
/**
* Computes a new matrix that replaces the specified column in the provided matrix with the provided Cartesian4 instance.
*
* @param {Matrix4} matrix The matrix to use.
* @param {Number} index The zero-based index of the column to set.
* @param {Cartesian4} cartesian The Cartesian whose values will be assigned to the specified column.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*
* @exception {DeveloperError} index must be 0, 1, 2, or 3.
*
* @example
* //creates a new Matrix4 instance with new column values from the Cartesian4 instance
* // m = [10.0, 11.0, 12.0, 13.0]
* // [14.0, 15.0, 16.0, 17.0]
* // [18.0, 19.0, 20.0, 21.0]
* // [22.0, 23.0, 24.0, 25.0]
*
* var a = Cesium.Matrix4.setColumn(m, 2, new Cesium.Cartesian4(99.0, 98.0, 97.0, 96.0), new Cesium.Matrix4());
*
* // m remains the same
* // a = [10.0, 11.0, 99.0, 13.0]
* // [14.0, 15.0, 98.0, 17.0]
* // [18.0, 19.0, 97.0, 21.0]
* // [22.0, 23.0, 96.0, 25.0]
*/
Matrix4.setColumn = function(matrix, index, cartesian, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (typeof index !== 'number' || index < 0 || index > 3) {
throw new DeveloperError('index must be 0, 1, 2, or 3.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result = Matrix4.clone(matrix, result);
var startIndex = index * 4;
result[startIndex] = cartesian.x;
result[startIndex + 1] = cartesian.y;
result[startIndex + 2] = cartesian.z;
result[startIndex + 3] = cartesian.w;
return result;
};
/**
* Computes a new matrix that replaces the translation in the rightmost column of the provided
* matrix with the provided translation. This assumes the matrix is an affine transformation
*
* @param {Matrix4} matrix The matrix to use.
* @param {Cartesian3} translation The translation that replaces the translation of the provided matrix.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*/
Matrix4.setTranslation = function(matrix, translation, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(translation)) {
throw new DeveloperError('translation is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = matrix[0];
result[1] = matrix[1];
result[2] = matrix[2];
result[3] = matrix[3];
result[4] = matrix[4];
result[5] = matrix[5];
result[6] = matrix[6];
result[7] = matrix[7];
result[8] = matrix[8];
result[9] = matrix[9];
result[10] = matrix[10];
result[11] = matrix[11];
result[12] = translation.x;
result[13] = translation.y;
result[14] = translation.z;
result[15] = matrix[15];
return result;
};
/**
* Retrieves a copy of the matrix row at the provided index as a Cartesian4 instance.
*
* @param {Matrix4} matrix The matrix to use.
* @param {Number} index The zero-based index of the row to retrieve.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*
* @exception {DeveloperError} index must be 0, 1, 2, or 3.
*
* @example
* //returns a Cartesian4 instance with values from the specified column
* // m = [10.0, 11.0, 12.0, 13.0]
* // [14.0, 15.0, 16.0, 17.0]
* // [18.0, 19.0, 20.0, 21.0]
* // [22.0, 23.0, 24.0, 25.0]
*
* //Example 1: Returns an instance of Cartesian
* var a = Cesium.Matrix4.getRow(m, 2, new Cesium.Cartesian4());
*
* @example
* //Example 2: Sets values for a Cartesian instance
* var a = new Cesium.Cartesian4();
* Cesium.Matrix4.getRow(m, 2, a);
*
* // a.x = 18.0; a.y = 19.0; a.z = 20.0; a.w = 21.0;
*/
Matrix4.getRow = function(matrix, index, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required.');
}
if (typeof index !== 'number' || index < 0 || index > 3) {
throw new DeveloperError('index must be 0, 1, 2, or 3.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var x = matrix[index];
var y = matrix[index + 4];
var z = matrix[index + 8];
var w = matrix[index + 12];
result.x = x;
result.y = y;
result.z = z;
result.w = w;
return result;
};
/**
* Computes a new matrix that replaces the specified row in the provided matrix with the provided Cartesian4 instance.
*
* @param {Matrix4} matrix The matrix to use.
* @param {Number} index The zero-based index of the row to set.
* @param {Cartesian4} cartesian The Cartesian whose values will be assigned to the specified row.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*
* @exception {DeveloperError} index must be 0, 1, 2, or 3.
*
* @example
* //create a new Matrix4 instance with new row values from the Cartesian4 instance
* // m = [10.0, 11.0, 12.0, 13.0]
* // [14.0, 15.0, 16.0, 17.0]
* // [18.0, 19.0, 20.0, 21.0]
* // [22.0, 23.0, 24.0, 25.0]
*
* var a = Cesium.Matrix4.setRow(m, 2, new Cesium.Cartesian4(99.0, 98.0, 97.0, 96.0), new Cesium.Matrix4());
*
* // m remains the same
* // a = [10.0, 11.0, 12.0, 13.0]
* // [14.0, 15.0, 16.0, 17.0]
* // [99.0, 98.0, 97.0, 96.0]
* // [22.0, 23.0, 24.0, 25.0]
*/
Matrix4.setRow = function(matrix, index, cartesian, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (typeof index !== 'number' || index < 0 || index > 3) {
throw new DeveloperError('index must be 0, 1, 2, or 3.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result = Matrix4.clone(matrix, result);
result[index] = cartesian.x;
result[index + 4] = cartesian.y;
result[index + 8] = cartesian.z;
result[index + 12] = cartesian.w;
return result;
};
var scratchColumn = new Cartesian3();
/**
* Extracts the non-uniform scale assuming the matrix is an affine transformation.
*
* @param {Matrix4} matrix The matrix.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter
*/
Matrix4.getScale = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = Cartesian3.magnitude(Cartesian3.fromElements(matrix[0], matrix[1], matrix[2], scratchColumn));
result.y = Cartesian3.magnitude(Cartesian3.fromElements(matrix[4], matrix[5], matrix[6], scratchColumn));
result.z = Cartesian3.magnitude(Cartesian3.fromElements(matrix[8], matrix[9], matrix[10], scratchColumn));
return result;
};
var scratchScale = new Cartesian3();
/**
* Computes the maximum scale assuming the matrix is an affine transformation.
* The maximum scale is the maximum length of the column vectors in the upper-left
* 3x3 matrix.
*
* @param {Matrix4} matrix The matrix.
* @returns {Number} The maximum scale.
*/
Matrix4.getMaximumScale = function(matrix) {
Matrix4.getScale(matrix, scratchScale);
return Cartesian3.maximumComponent(scratchScale);
};
/**
* Computes the product of two matrices.
*
* @param {Matrix4} left The first matrix.
* @param {Matrix4} right The second matrix.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*/
Matrix4.multiply = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var left0 = left[0];
var left1 = left[1];
var left2 = left[2];
var left3 = left[3];
var left4 = left[4];
var left5 = left[5];
var left6 = left[6];
var left7 = left[7];
var left8 = left[8];
var left9 = left[9];
var left10 = left[10];
var left11 = left[11];
var left12 = left[12];
var left13 = left[13];
var left14 = left[14];
var left15 = left[15];
var right0 = right[0];
var right1 = right[1];
var right2 = right[2];
var right3 = right[3];
var right4 = right[4];
var right5 = right[5];
var right6 = right[6];
var right7 = right[7];
var right8 = right[8];
var right9 = right[9];
var right10 = right[10];
var right11 = right[11];
var right12 = right[12];
var right13 = right[13];
var right14 = right[14];
var right15 = right[15];
var column0Row0 = left0 * right0 + left4 * right1 + left8 * right2 + left12 * right3;
var column0Row1 = left1 * right0 + left5 * right1 + left9 * right2 + left13 * right3;
var column0Row2 = left2 * right0 + left6 * right1 + left10 * right2 + left14 * right3;
var column0Row3 = left3 * right0 + left7 * right1 + left11 * right2 + left15 * right3;
var column1Row0 = left0 * right4 + left4 * right5 + left8 * right6 + left12 * right7;
var column1Row1 = left1 * right4 + left5 * right5 + left9 * right6 + left13 * right7;
var column1Row2 = left2 * right4 + left6 * right5 + left10 * right6 + left14 * right7;
var column1Row3 = left3 * right4 + left7 * right5 + left11 * right6 + left15 * right7;
var column2Row0 = left0 * right8 + left4 * right9 + left8 * right10 + left12 * right11;
var column2Row1 = left1 * right8 + left5 * right9 + left9 * right10 + left13 * right11;
var column2Row2 = left2 * right8 + left6 * right9 + left10 * right10 + left14 * right11;
var column2Row3 = left3 * right8 + left7 * right9 + left11 * right10 + left15 * right11;
var column3Row0 = left0 * right12 + left4 * right13 + left8 * right14 + left12 * right15;
var column3Row1 = left1 * right12 + left5 * right13 + left9 * right14 + left13 * right15;
var column3Row2 = left2 * right12 + left6 * right13 + left10 * right14 + left14 * right15;
var column3Row3 = left3 * right12 + left7 * right13 + left11 * right14 + left15 * right15;
result[0] = column0Row0;
result[1] = column0Row1;
result[2] = column0Row2;
result[3] = column0Row3;
result[4] = column1Row0;
result[5] = column1Row1;
result[6] = column1Row2;
result[7] = column1Row3;
result[8] = column2Row0;
result[9] = column2Row1;
result[10] = column2Row2;
result[11] = column2Row3;
result[12] = column3Row0;
result[13] = column3Row1;
result[14] = column3Row2;
result[15] = column3Row3;
return result;
};
/**
* Computes the sum of two matrices.
*
* @param {Matrix4} left The first matrix.
* @param {Matrix4} right The second matrix.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*/
Matrix4.add = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = left[0] + right[0];
result[1] = left[1] + right[1];
result[2] = left[2] + right[2];
result[3] = left[3] + right[3];
result[4] = left[4] + right[4];
result[5] = left[5] + right[5];
result[6] = left[6] + right[6];
result[7] = left[7] + right[7];
result[8] = left[8] + right[8];
result[9] = left[9] + right[9];
result[10] = left[10] + right[10];
result[11] = left[11] + right[11];
result[12] = left[12] + right[12];
result[13] = left[13] + right[13];
result[14] = left[14] + right[14];
result[15] = left[15] + right[15];
return result;
};
/**
* Computes the difference of two matrices.
*
* @param {Matrix4} left The first matrix.
* @param {Matrix4} right The second matrix.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*/
Matrix4.subtract = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = left[0] - right[0];
result[1] = left[1] - right[1];
result[2] = left[2] - right[2];
result[3] = left[3] - right[3];
result[4] = left[4] - right[4];
result[5] = left[5] - right[5];
result[6] = left[6] - right[6];
result[7] = left[7] - right[7];
result[8] = left[8] - right[8];
result[9] = left[9] - right[9];
result[10] = left[10] - right[10];
result[11] = left[11] - right[11];
result[12] = left[12] - right[12];
result[13] = left[13] - right[13];
result[14] = left[14] - right[14];
result[15] = left[15] - right[15];
return result;
};
/**
* Computes the product of two matrices assuming the matrices are
* affine transformation matrices, where the upper left 3x3 elements
* are a rotation matrix, and the upper three elements in the fourth
* column are the translation. The bottom row is assumed to be [0, 0, 0, 1].
* The matrix is not verified to be in the proper form.
* This method is faster than computing the product for general 4x4
* matrices using {@link Matrix4.multiply}.
*
* @param {Matrix4} left The first matrix.
* @param {Matrix4} right The second matrix.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*
* @example
* var m1 = new Cesium.Matrix4(1.0, 6.0, 7.0, 0.0, 2.0, 5.0, 8.0, 0.0, 3.0, 4.0, 9.0, 0.0, 0.0, 0.0, 0.0, 1.0);
* var m2 = Cesium.Transforms.eastNorthUpToFixedFrame(new Cesium.Cartesian3(1.0, 1.0, 1.0));
* var m3 = Cesium.Matrix4.multiplyTransformation(m1, m2, new Cesium.Matrix4());
*/
Matrix4.multiplyTransformation = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var left0 = left[0];
var left1 = left[1];
var left2 = left[2];
var left4 = left[4];
var left5 = left[5];
var left6 = left[6];
var left8 = left[8];
var left9 = left[9];
var left10 = left[10];
var left12 = left[12];
var left13 = left[13];
var left14 = left[14];
var right0 = right[0];
var right1 = right[1];
var right2 = right[2];
var right4 = right[4];
var right5 = right[5];
var right6 = right[6];
var right8 = right[8];
var right9 = right[9];
var right10 = right[10];
var right12 = right[12];
var right13 = right[13];
var right14 = right[14];
var column0Row0 = left0 * right0 + left4 * right1 + left8 * right2;
var column0Row1 = left1 * right0 + left5 * right1 + left9 * right2;
var column0Row2 = left2 * right0 + left6 * right1 + left10 * right2;
var column1Row0 = left0 * right4 + left4 * right5 + left8 * right6;
var column1Row1 = left1 * right4 + left5 * right5 + left9 * right6;
var column1Row2 = left2 * right4 + left6 * right5 + left10 * right6;
var column2Row0 = left0 * right8 + left4 * right9 + left8 * right10;
var column2Row1 = left1 * right8 + left5 * right9 + left9 * right10;
var column2Row2 = left2 * right8 + left6 * right9 + left10 * right10;
var column3Row0 = left0 * right12 + left4 * right13 + left8 * right14 + left12;
var column3Row1 = left1 * right12 + left5 * right13 + left9 * right14 + left13;
var column3Row2 = left2 * right12 + left6 * right13 + left10 * right14 + left14;
result[0] = column0Row0;
result[1] = column0Row1;
result[2] = column0Row2;
result[3] = 0.0;
result[4] = column1Row0;
result[5] = column1Row1;
result[6] = column1Row2;
result[7] = 0.0;
result[8] = column2Row0;
result[9] = column2Row1;
result[10] = column2Row2;
result[11] = 0.0;
result[12] = column3Row0;
result[13] = column3Row1;
result[14] = column3Row2;
result[15] = 1.0;
return result;
};
/**
* Multiplies a transformation matrix (with a bottom row of [0.0, 0.0, 0.0, 1.0])
* by a 3x3 rotation matrix. This is an optimization
* for Matrix4.multiply(m, Matrix4.fromRotationTranslation(rotation), m); with less allocations and arithmetic operations.
*
* @param {Matrix4} matrix The matrix on the left-hand side.
* @param {Matrix3} rotation The 3x3 rotation matrix on the right-hand side.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*
* @example
* // Instead of Cesium.Matrix4.multiply(m, Cesium.Matrix4.fromRotationTranslation(rotation), m);
* Cesium.Matrix4.multiplyByMatrix3(m, rotation, m);
*/
Matrix4.multiplyByMatrix3 = function(matrix, rotation, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(rotation)) {
throw new DeveloperError('rotation is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var left0 = matrix[0];
var left1 = matrix[1];
var left2 = matrix[2];
var left4 = matrix[4];
var left5 = matrix[5];
var left6 = matrix[6];
var left8 = matrix[8];
var left9 = matrix[9];
var left10 = matrix[10];
var right0 = rotation[0];
var right1 = rotation[1];
var right2 = rotation[2];
var right4 = rotation[3];
var right5 = rotation[4];
var right6 = rotation[5];
var right8 = rotation[6];
var right9 = rotation[7];
var right10 = rotation[8];
var column0Row0 = left0 * right0 + left4 * right1 + left8 * right2;
var column0Row1 = left1 * right0 + left5 * right1 + left9 * right2;
var column0Row2 = left2 * right0 + left6 * right1 + left10 * right2;
var column1Row0 = left0 * right4 + left4 * right5 + left8 * right6;
var column1Row1 = left1 * right4 + left5 * right5 + left9 * right6;
var column1Row2 = left2 * right4 + left6 * right5 + left10 * right6;
var column2Row0 = left0 * right8 + left4 * right9 + left8 * right10;
var column2Row1 = left1 * right8 + left5 * right9 + left9 * right10;
var column2Row2 = left2 * right8 + left6 * right9 + left10 * right10;
result[0] = column0Row0;
result[1] = column0Row1;
result[2] = column0Row2;
result[3] = 0.0;
result[4] = column1Row0;
result[5] = column1Row1;
result[6] = column1Row2;
result[7] = 0.0;
result[8] = column2Row0;
result[9] = column2Row1;
result[10] = column2Row2;
result[11] = 0.0;
result[12] = matrix[12];
result[13] = matrix[13];
result[14] = matrix[14];
result[15] = matrix[15];
return result;
};
/**
* Multiplies a transformation matrix (with a bottom row of [0.0, 0.0, 0.0, 1.0])
* by an implicit translation matrix defined by a {@link Cartesian3}. This is an optimization
* for Matrix4.multiply(m, Matrix4.fromTranslation(position), m); with less allocations and arithmetic operations.
*
* @param {Matrix4} matrix The matrix on the left-hand side.
* @param {Cartesian3} translation The translation on the right-hand side.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*
* @example
* // Instead of Cesium.Matrix4.multiply(m, Cesium.Matrix4.fromTranslation(position), m);
* Cesium.Matrix4.multiplyByTranslation(m, position, m);
*/
Matrix4.multiplyByTranslation = function(matrix, translation, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(translation)) {
throw new DeveloperError('translation is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var x = translation.x;
var y = translation.y;
var z = translation.z;
var tx = (x * matrix[0]) + (y * matrix[4]) + (z * matrix[8]) + matrix[12];
var ty = (x * matrix[1]) + (y * matrix[5]) + (z * matrix[9]) + matrix[13];
var tz = (x * matrix[2]) + (y * matrix[6]) + (z * matrix[10]) + matrix[14];
result[0] = matrix[0];
result[1] = matrix[1];
result[2] = matrix[2];
result[3] = matrix[3];
result[4] = matrix[4];
result[5] = matrix[5];
result[6] = matrix[6];
result[7] = matrix[7];
result[8] = matrix[8];
result[9] = matrix[9];
result[10] = matrix[10];
result[11] = matrix[11];
result[12] = tx;
result[13] = ty;
result[14] = tz;
result[15] = matrix[15];
return result;
};
var uniformScaleScratch = new Cartesian3();
/**
* Multiplies an affine transformation matrix (with a bottom row of [0.0, 0.0, 0.0, 1.0])
* by an implicit uniform scale matrix. This is an optimization
* for Matrix4.multiply(m, Matrix4.fromUniformScale(scale), m);, where
* m must be an affine matrix.
* This function performs fewer allocations and arithmetic operations.
*
* @param {Matrix4} matrix The affine matrix on the left-hand side.
* @param {Number} scale The uniform scale on the right-hand side.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*
*
* @example
* // Instead of Cesium.Matrix4.multiply(m, Cesium.Matrix4.fromUniformScale(scale), m);
* Cesium.Matrix4.multiplyByUniformScale(m, scale, m);
*
* @see Matrix4.fromUniformScale
* @see Matrix4.multiplyByScale
*/
Matrix4.multiplyByUniformScale = function(matrix, scale, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (typeof scale !== 'number') {
throw new DeveloperError('scale is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
uniformScaleScratch.x = scale;
uniformScaleScratch.y = scale;
uniformScaleScratch.z = scale;
return Matrix4.multiplyByScale(matrix, uniformScaleScratch, result);
};
/**
* Multiplies an affine transformation matrix (with a bottom row of [0.0, 0.0, 0.0, 1.0])
* by an implicit non-uniform scale matrix. This is an optimization
* for Matrix4.multiply(m, Matrix4.fromUniformScale(scale), m);, where
* m must be an affine matrix.
* This function performs fewer allocations and arithmetic operations.
*
* @param {Matrix4} matrix The affine matrix on the left-hand side.
* @param {Cartesian3} scale The non-uniform scale on the right-hand side.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*
*
* @example
* // Instead of Cesium.Matrix4.multiply(m, Cesium.Matrix4.fromScale(scale), m);
* Cesium.Matrix4.multiplyByScale(m, scale, m);
*
* @see Matrix4.fromScale
* @see Matrix4.multiplyByUniformScale
*/
Matrix4.multiplyByScale = function(matrix, scale, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(scale)) {
throw new DeveloperError('scale is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var scaleX = scale.x;
var scaleY = scale.y;
var scaleZ = scale.z;
// Faster than Cartesian3.equals
if ((scaleX === 1.0) && (scaleY === 1.0) && (scaleZ === 1.0)) {
return Matrix4.clone(matrix, result);
}
result[0] = scaleX * matrix[0];
result[1] = scaleX * matrix[1];
result[2] = scaleX * matrix[2];
result[3] = 0.0;
result[4] = scaleY * matrix[4];
result[5] = scaleY * matrix[5];
result[6] = scaleY * matrix[6];
result[7] = 0.0;
result[8] = scaleZ * matrix[8];
result[9] = scaleZ * matrix[9];
result[10] = scaleZ * matrix[10];
result[11] = 0.0;
result[12] = matrix[12];
result[13] = matrix[13];
result[14] = matrix[14];
result[15] = 1.0;
return result;
};
/**
* Computes the product of a matrix and a column vector.
*
* @param {Matrix4} matrix The matrix.
* @param {Cartesian4} cartesian The vector.
* @param {Cartesian4} result The object onto which to store the result.
* @returns {Cartesian4} The modified result parameter.
*/
Matrix4.multiplyByVector = function(matrix, cartesian, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var vX = cartesian.x;
var vY = cartesian.y;
var vZ = cartesian.z;
var vW = cartesian.w;
var x = matrix[0] * vX + matrix[4] * vY + matrix[8] * vZ + matrix[12] * vW;
var y = matrix[1] * vX + matrix[5] * vY + matrix[9] * vZ + matrix[13] * vW;
var z = matrix[2] * vX + matrix[6] * vY + matrix[10] * vZ + matrix[14] * vW;
var w = matrix[3] * vX + matrix[7] * vY + matrix[11] * vZ + matrix[15] * vW;
result.x = x;
result.y = y;
result.z = z;
result.w = w;
return result;
};
/**
* Computes the product of a matrix and a {@link Cartesian3}. This is equivalent to calling {@link Matrix4.multiplyByVector}
* with a {@link Cartesian4} with a w component of zero.
*
* @param {Matrix4} matrix The matrix.
* @param {Cartesian3} cartesian The point.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*
* @example
* var p = new Cesium.Cartesian3(1.0, 2.0, 3.0);
* var result = Cesium.Matrix4.multiplyByPointAsVector(matrix, p, new Cesium.Cartesian3());
* // A shortcut for
* // Cartesian3 p = ...
* // Cesium.Matrix4.multiplyByVector(matrix, new Cesium.Cartesian4(p.x, p.y, p.z, 0.0), result);
*/
Matrix4.multiplyByPointAsVector = function(matrix, cartesian, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var vX = cartesian.x;
var vY = cartesian.y;
var vZ = cartesian.z;
var x = matrix[0] * vX + matrix[4] * vY + matrix[8] * vZ;
var y = matrix[1] * vX + matrix[5] * vY + matrix[9] * vZ;
var z = matrix[2] * vX + matrix[6] * vY + matrix[10] * vZ;
result.x = x;
result.y = y;
result.z = z;
return result;
};
/**
* Computes the product of a matrix and a {@link Cartesian3}. This is equivalent to calling {@link Matrix4.multiplyByVector}
* with a {@link Cartesian4} with a w component of 1, but returns a {@link Cartesian3} instead of a {@link Cartesian4}.
*
* @param {Matrix4} matrix The matrix.
* @param {Cartesian3} cartesian The point.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*
* @example
* var p = new Cesium.Cartesian3(1.0, 2.0, 3.0);
* var result = Cesium.Matrix4.multiplyByPoint(matrix, p, new Cesium.Cartesian3());
*/
Matrix4.multiplyByPoint = function(matrix, cartesian, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var vX = cartesian.x;
var vY = cartesian.y;
var vZ = cartesian.z;
var x = matrix[0] * vX + matrix[4] * vY + matrix[8] * vZ + matrix[12];
var y = matrix[1] * vX + matrix[5] * vY + matrix[9] * vZ + matrix[13];
var z = matrix[2] * vX + matrix[6] * vY + matrix[10] * vZ + matrix[14];
result.x = x;
result.y = y;
result.z = z;
return result;
};
/**
* Computes the product of a matrix and a scalar.
*
* @param {Matrix4} matrix The matrix.
* @param {Number} scalar The number to multiply by.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*
* @example
* //create a Matrix4 instance which is a scaled version of the supplied Matrix4
* // m = [10.0, 11.0, 12.0, 13.0]
* // [14.0, 15.0, 16.0, 17.0]
* // [18.0, 19.0, 20.0, 21.0]
* // [22.0, 23.0, 24.0, 25.0]
*
* var a = Cesium.Matrix4.multiplyByScalar(m, -2, new Cesium.Matrix4());
*
* // m remains the same
* // a = [-20.0, -22.0, -24.0, -26.0]
* // [-28.0, -30.0, -32.0, -34.0]
* // [-36.0, -38.0, -40.0, -42.0]
* // [-44.0, -46.0, -48.0, -50.0]
*/
Matrix4.multiplyByScalar = function(matrix, scalar, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (typeof scalar !== 'number') {
throw new DeveloperError('scalar must be a number');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = matrix[0] * scalar;
result[1] = matrix[1] * scalar;
result[2] = matrix[2] * scalar;
result[3] = matrix[3] * scalar;
result[4] = matrix[4] * scalar;
result[5] = matrix[5] * scalar;
result[6] = matrix[6] * scalar;
result[7] = matrix[7] * scalar;
result[8] = matrix[8] * scalar;
result[9] = matrix[9] * scalar;
result[10] = matrix[10] * scalar;
result[11] = matrix[11] * scalar;
result[12] = matrix[12] * scalar;
result[13] = matrix[13] * scalar;
result[14] = matrix[14] * scalar;
result[15] = matrix[15] * scalar;
return result;
};
/**
* Computes a negated copy of the provided matrix.
*
* @param {Matrix4} matrix The matrix to negate.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*
* @example
* //create a new Matrix4 instance which is a negation of a Matrix4
* // m = [10.0, 11.0, 12.0, 13.0]
* // [14.0, 15.0, 16.0, 17.0]
* // [18.0, 19.0, 20.0, 21.0]
* // [22.0, 23.0, 24.0, 25.0]
*
* var a = Cesium.Matrix4.negate(m, new Cesium.Matrix4());
*
* // m remains the same
* // a = [-10.0, -11.0, -12.0, -13.0]
* // [-14.0, -15.0, -16.0, -17.0]
* // [-18.0, -19.0, -20.0, -21.0]
* // [-22.0, -23.0, -24.0, -25.0]
*/
Matrix4.negate = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = -matrix[0];
result[1] = -matrix[1];
result[2] = -matrix[2];
result[3] = -matrix[3];
result[4] = -matrix[4];
result[5] = -matrix[5];
result[6] = -matrix[6];
result[7] = -matrix[7];
result[8] = -matrix[8];
result[9] = -matrix[9];
result[10] = -matrix[10];
result[11] = -matrix[11];
result[12] = -matrix[12];
result[13] = -matrix[13];
result[14] = -matrix[14];
result[15] = -matrix[15];
return result;
};
/**
* Computes the transpose of the provided matrix.
*
* @param {Matrix4} matrix The matrix to transpose.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*
* @example
* //returns transpose of a Matrix4
* // m = [10.0, 11.0, 12.0, 13.0]
* // [14.0, 15.0, 16.0, 17.0]
* // [18.0, 19.0, 20.0, 21.0]
* // [22.0, 23.0, 24.0, 25.0]
*
* var a = Cesium.Matrix4.transpose(m, new Cesium.Matrix4());
*
* // m remains the same
* // a = [10.0, 14.0, 18.0, 22.0]
* // [11.0, 15.0, 19.0, 23.0]
* // [12.0, 16.0, 20.0, 24.0]
* // [13.0, 17.0, 21.0, 25.0]
*/
Matrix4.transpose = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var matrix1 = matrix[1];
var matrix2 = matrix[2];
var matrix3 = matrix[3];
var matrix6 = matrix[6];
var matrix7 = matrix[7];
var matrix11 = matrix[11];
result[0] = matrix[0];
result[1] = matrix[4];
result[2] = matrix[8];
result[3] = matrix[12];
result[4] = matrix1;
result[5] = matrix[5];
result[6] = matrix[9];
result[7] = matrix[13];
result[8] = matrix2;
result[9] = matrix6;
result[10] = matrix[10];
result[11] = matrix[14];
result[12] = matrix3;
result[13] = matrix7;
result[14] = matrix11;
result[15] = matrix[15];
return result;
};
/**
* Computes a matrix, which contains the absolute (unsigned) values of the provided matrix's elements.
*
* @param {Matrix4} matrix The matrix with signed elements.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*/
Matrix4.abs = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = Math.abs(matrix[0]);
result[1] = Math.abs(matrix[1]);
result[2] = Math.abs(matrix[2]);
result[3] = Math.abs(matrix[3]);
result[4] = Math.abs(matrix[4]);
result[5] = Math.abs(matrix[5]);
result[6] = Math.abs(matrix[6]);
result[7] = Math.abs(matrix[7]);
result[8] = Math.abs(matrix[8]);
result[9] = Math.abs(matrix[9]);
result[10] = Math.abs(matrix[10]);
result[11] = Math.abs(matrix[11]);
result[12] = Math.abs(matrix[12]);
result[13] = Math.abs(matrix[13]);
result[14] = Math.abs(matrix[14]);
result[15] = Math.abs(matrix[15]);
return result;
};
/**
* Compares the provided matrices componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Matrix4} [left] The first matrix.
* @param {Matrix4} [right] The second matrix.
* @returns {Boolean} true if left and right are equal, false otherwise.
*
* @example
* //compares two Matrix4 instances
*
* // a = [10.0, 14.0, 18.0, 22.0]
* // [11.0, 15.0, 19.0, 23.0]
* // [12.0, 16.0, 20.0, 24.0]
* // [13.0, 17.0, 21.0, 25.0]
*
* // b = [10.0, 14.0, 18.0, 22.0]
* // [11.0, 15.0, 19.0, 23.0]
* // [12.0, 16.0, 20.0, 24.0]
* // [13.0, 17.0, 21.0, 25.0]
*
* if(Cesium.Matrix4.equals(a,b)) {
* console.log("Both matrices are equal");
* } else {
* console.log("They are not equal");
* }
*
* //Prints "Both matrices are equal" on the console
*/
Matrix4.equals = function(left, right) {
// Given that most matrices will be transformation matrices, the elements
// are tested in order such that the test is likely to fail as early
// as possible. I _think_ this is just as friendly to the L1 cache
// as testing in index order. It is certainty faster in practice.
return (left === right) ||
(defined(left) &&
defined(right) &&
// Translation
left[12] === right[12] &&
left[13] === right[13] &&
left[14] === right[14] &&
// Rotation/scale
left[0] === right[0] &&
left[1] === right[1] &&
left[2] === right[2] &&
left[4] === right[4] &&
left[5] === right[5] &&
left[6] === right[6] &&
left[8] === right[8] &&
left[9] === right[9] &&
left[10] === right[10] &&
// Bottom row
left[3] === right[3] &&
left[7] === right[7] &&
left[11] === right[11] &&
left[15] === right[15]);
};
/**
* Compares the provided matrices componentwise and returns
* true if they are within the provided epsilon,
* false otherwise.
*
* @param {Matrix4} [left] The first matrix.
* @param {Matrix4} [right] The second matrix.
* @param {Number} epsilon The epsilon to use for equality testing.
* @returns {Boolean} true if left and right are within the provided epsilon, false otherwise.
*
* @example
* //compares two Matrix4 instances
*
* // a = [10.5, 14.5, 18.5, 22.5]
* // [11.5, 15.5, 19.5, 23.5]
* // [12.5, 16.5, 20.5, 24.5]
* // [13.5, 17.5, 21.5, 25.5]
*
* // b = [10.0, 14.0, 18.0, 22.0]
* // [11.0, 15.0, 19.0, 23.0]
* // [12.0, 16.0, 20.0, 24.0]
* // [13.0, 17.0, 21.0, 25.0]
*
* if(Cesium.Matrix4.equalsEpsilon(a,b,0.1)){
* console.log("Difference between both the matrices is less than 0.1");
* } else {
* console.log("Difference between both the matrices is not less than 0.1");
* }
*
* //Prints "Difference between both the matrices is not less than 0.1" on the console
*/
Matrix4.equalsEpsilon = function(left, right, epsilon) {
if (typeof epsilon !== 'number') {
throw new DeveloperError('epsilon must be a number');
}
return (left === right) ||
(defined(left) &&
defined(right) &&
Math.abs(left[0] - right[0]) <= epsilon &&
Math.abs(left[1] - right[1]) <= epsilon &&
Math.abs(left[2] - right[2]) <= epsilon &&
Math.abs(left[3] - right[3]) <= epsilon &&
Math.abs(left[4] - right[4]) <= epsilon &&
Math.abs(left[5] - right[5]) <= epsilon &&
Math.abs(left[6] - right[6]) <= epsilon &&
Math.abs(left[7] - right[7]) <= epsilon &&
Math.abs(left[8] - right[8]) <= epsilon &&
Math.abs(left[9] - right[9]) <= epsilon &&
Math.abs(left[10] - right[10]) <= epsilon &&
Math.abs(left[11] - right[11]) <= epsilon &&
Math.abs(left[12] - right[12]) <= epsilon &&
Math.abs(left[13] - right[13]) <= epsilon &&
Math.abs(left[14] - right[14]) <= epsilon &&
Math.abs(left[15] - right[15]) <= epsilon);
};
/**
* Gets the translation portion of the provided matrix, assuming the matrix is a affine transformation matrix.
*
* @param {Matrix4} matrix The matrix to use.
* @param {Cartesian3} result The object onto which to store the result.
* @returns {Cartesian3} The modified result parameter.
*/
Matrix4.getTranslation = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = matrix[12];
result.y = matrix[13];
result.z = matrix[14];
return result;
};
/**
* Gets the upper left 3x3 rotation matrix of the provided matrix, assuming the matrix is a affine transformation matrix.
*
* @param {Matrix4} matrix The matrix to use.
* @param {Matrix3} result The object onto which to store the result.
* @returns {Matrix3} The modified result parameter.
*
* @example
* // returns a Matrix3 instance from a Matrix4 instance
*
* // m = [10.0, 14.0, 18.0, 22.0]
* // [11.0, 15.0, 19.0, 23.0]
* // [12.0, 16.0, 20.0, 24.0]
* // [13.0, 17.0, 21.0, 25.0]
*
* var b = new Cesium.Matrix3();
* Cesium.Matrix4.getRotation(m,b);
*
* // b = [10.0, 14.0, 18.0]
* // [11.0, 15.0, 19.0]
* // [12.0, 16.0, 20.0]
*/
Matrix4.getRotation = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result[0] = matrix[0];
result[1] = matrix[1];
result[2] = matrix[2];
result[3] = matrix[4];
result[4] = matrix[5];
result[5] = matrix[6];
result[6] = matrix[8];
result[7] = matrix[9];
result[8] = matrix[10];
return result;
};
var scratchInverseRotation = new Matrix3();
var scratchMatrix3Zero = new Matrix3();
var scratchBottomRow = new Cartesian4();
var scratchExpectedBottomRow = new Cartesian4(0.0, 0.0, 0.0, 1.0);
/**
* Computes the inverse of the provided matrix using Cramers Rule.
* If the determinant is zero, the matrix can not be inverted, and an exception is thrown.
* If the matrix is an affine transformation matrix, it is more efficient
* to invert it with {@link Matrix4.inverseTransformation}.
*
* @param {Matrix4} matrix The matrix to invert.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*
* @exception {RuntimeError} matrix is not invertible because its determinate is zero.
*/
Matrix4.inverse = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
// Special case for a zero scale matrix that can occur, for example,
// when a model's node has a [0, 0, 0] scale.
if (Matrix3.equalsEpsilon(Matrix4.getRotation(matrix, scratchInverseRotation), scratchMatrix3Zero, CesiumMath.EPSILON7) &&
Cartesian4.equals(Matrix4.getRow(matrix, 3, scratchBottomRow), scratchExpectedBottomRow)) {
result[0] = 0.0;
result[1] = 0.0;
result[2] = 0.0;
result[3] = 0.0;
result[4] = 0.0;
result[5] = 0.0;
result[6] = 0.0;
result[7] = 0.0;
result[8] = 0.0;
result[9] = 0.0;
result[10] = 0.0;
result[11] = 0.0;
result[12] = -matrix[12];
result[13] = -matrix[13];
result[14] = -matrix[14];
result[15] = 1.0;
return result;
}
//
// Ported from:
// ftp://download.intel.com/design/PentiumIII/sml/24504301.pdf
//
var src0 = matrix[0];
var src1 = matrix[4];
var src2 = matrix[8];
var src3 = matrix[12];
var src4 = matrix[1];
var src5 = matrix[5];
var src6 = matrix[9];
var src7 = matrix[13];
var src8 = matrix[2];
var src9 = matrix[6];
var src10 = matrix[10];
var src11 = matrix[14];
var src12 = matrix[3];
var src13 = matrix[7];
var src14 = matrix[11];
var src15 = matrix[15];
// calculate pairs for first 8 elements (cofactors)
var tmp0 = src10 * src15;
var tmp1 = src11 * src14;
var tmp2 = src9 * src15;
var tmp3 = src11 * src13;
var tmp4 = src9 * src14;
var tmp5 = src10 * src13;
var tmp6 = src8 * src15;
var tmp7 = src11 * src12;
var tmp8 = src8 * src14;
var tmp9 = src10 * src12;
var tmp10 = src8 * src13;
var tmp11 = src9 * src12;
// calculate first 8 elements (cofactors)
var dst0 = (tmp0 * src5 + tmp3 * src6 + tmp4 * src7) - (tmp1 * src5 + tmp2 * src6 + tmp5 * src7);
var dst1 = (tmp1 * src4 + tmp6 * src6 + tmp9 * src7) - (tmp0 * src4 + tmp7 * src6 + tmp8 * src7);
var dst2 = (tmp2 * src4 + tmp7 * src5 + tmp10 * src7) - (tmp3 * src4 + tmp6 * src5 + tmp11 * src7);
var dst3 = (tmp5 * src4 + tmp8 * src5 + tmp11 * src6) - (tmp4 * src4 + tmp9 * src5 + tmp10 * src6);
var dst4 = (tmp1 * src1 + tmp2 * src2 + tmp5 * src3) - (tmp0 * src1 + tmp3 * src2 + tmp4 * src3);
var dst5 = (tmp0 * src0 + tmp7 * src2 + tmp8 * src3) - (tmp1 * src0 + tmp6 * src2 + tmp9 * src3);
var dst6 = (tmp3 * src0 + tmp6 * src1 + tmp11 * src3) - (tmp2 * src0 + tmp7 * src1 + tmp10 * src3);
var dst7 = (tmp4 * src0 + tmp9 * src1 + tmp10 * src2) - (tmp5 * src0 + tmp8 * src1 + tmp11 * src2);
// calculate pairs for second 8 elements (cofactors)
tmp0 = src2 * src7;
tmp1 = src3 * src6;
tmp2 = src1 * src7;
tmp3 = src3 * src5;
tmp4 = src1 * src6;
tmp5 = src2 * src5;
tmp6 = src0 * src7;
tmp7 = src3 * src4;
tmp8 = src0 * src6;
tmp9 = src2 * src4;
tmp10 = src0 * src5;
tmp11 = src1 * src4;
// calculate second 8 elements (cofactors)
var dst8 = (tmp0 * src13 + tmp3 * src14 + tmp4 * src15) - (tmp1 * src13 + tmp2 * src14 + tmp5 * src15);
var dst9 = (tmp1 * src12 + tmp6 * src14 + tmp9 * src15) - (tmp0 * src12 + tmp7 * src14 + tmp8 * src15);
var dst10 = (tmp2 * src12 + tmp7 * src13 + tmp10 * src15) - (tmp3 * src12 + tmp6 * src13 + tmp11 * src15);
var dst11 = (tmp5 * src12 + tmp8 * src13 + tmp11 * src14) - (tmp4 * src12 + tmp9 * src13 + tmp10 * src14);
var dst12 = (tmp2 * src10 + tmp5 * src11 + tmp1 * src9) - (tmp4 * src11 + tmp0 * src9 + tmp3 * src10);
var dst13 = (tmp8 * src11 + tmp0 * src8 + tmp7 * src10) - (tmp6 * src10 + tmp9 * src11 + tmp1 * src8);
var dst14 = (tmp6 * src9 + tmp11 * src11 + tmp3 * src8) - (tmp10 * src11 + tmp2 * src8 + tmp7 * src9);
var dst15 = (tmp10 * src10 + tmp4 * src8 + tmp9 * src9) - (tmp8 * src9 + tmp11 * src10 + tmp5 * src8);
// calculate determinant
var det = src0 * dst0 + src1 * dst1 + src2 * dst2 + src3 * dst3;
if (Math.abs(det) < CesiumMath.EPSILON20) {
throw new RuntimeError('matrix is not invertible because its determinate is zero.');
}
// calculate matrix inverse
det = 1.0 / det;
result[0] = dst0 * det;
result[1] = dst1 * det;
result[2] = dst2 * det;
result[3] = dst3 * det;
result[4] = dst4 * det;
result[5] = dst5 * det;
result[6] = dst6 * det;
result[7] = dst7 * det;
result[8] = dst8 * det;
result[9] = dst9 * det;
result[10] = dst10 * det;
result[11] = dst11 * det;
result[12] = dst12 * det;
result[13] = dst13 * det;
result[14] = dst14 * det;
result[15] = dst15 * det;
return result;
};
/**
* Computes the inverse of the provided matrix assuming it is
* an affine transformation matrix, where the upper left 3x3 elements
* are a rotation matrix, and the upper three elements in the fourth
* column are the translation. The bottom row is assumed to be [0, 0, 0, 1].
* The matrix is not verified to be in the proper form.
* This method is faster than computing the inverse for a general 4x4
* matrix using {@link Matrix4.inverse}.
*
* @param {Matrix4} matrix The matrix to invert.
* @param {Matrix4} result The object onto which to store the result.
* @returns {Matrix4} The modified result parameter.
*/
Matrix4.inverseTransformation = function(matrix, result) {
if (!defined(matrix)) {
throw new DeveloperError('matrix is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
//This function is an optimized version of the below 4 lines.
//var rT = Matrix3.transpose(Matrix4.getRotation(matrix));
//var rTN = Matrix3.negate(rT);
//var rTT = Matrix3.multiplyByVector(rTN, Matrix4.getTranslation(matrix));
//return Matrix4.fromRotationTranslation(rT, rTT, result);
var matrix0 = matrix[0];
var matrix1 = matrix[1];
var matrix2 = matrix[2];
var matrix4 = matrix[4];
var matrix5 = matrix[5];
var matrix6 = matrix[6];
var matrix8 = matrix[8];
var matrix9 = matrix[9];
var matrix10 = matrix[10];
var vX = matrix[12];
var vY = matrix[13];
var vZ = matrix[14];
var x = -matrix0 * vX - matrix1 * vY - matrix2 * vZ;
var y = -matrix4 * vX - matrix5 * vY - matrix6 * vZ;
var z = -matrix8 * vX - matrix9 * vY - matrix10 * vZ;
result[0] = matrix0;
result[1] = matrix4;
result[2] = matrix8;
result[3] = 0.0;
result[4] = matrix1;
result[5] = matrix5;
result[6] = matrix9;
result[7] = 0.0;
result[8] = matrix2;
result[9] = matrix6;
result[10] = matrix10;
result[11] = 0.0;
result[12] = x;
result[13] = y;
result[14] = z;
result[15] = 1.0;
return result;
};
/**
* An immutable Matrix4 instance initialized to the identity matrix.
*
* @type {Matrix4}
* @constant
*/
Matrix4.IDENTITY = freezeObject(new Matrix4(1.0, 0.0, 0.0, 0.0,
0.0, 1.0, 0.0, 0.0,
0.0, 0.0, 1.0, 0.0,
0.0, 0.0, 0.0, 1.0));
/**
* An immutable Matrix4 instance initialized to the zero matrix.
*
* @type {Matrix4}
* @constant
*/
Matrix4.ZERO = freezeObject(new Matrix4(0.0, 0.0, 0.0, 0.0,
0.0, 0.0, 0.0, 0.0,
0.0, 0.0, 0.0, 0.0,
0.0, 0.0, 0.0, 0.0));
/**
* The index into Matrix4 for column 0, row 0.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN0ROW0 = 0;
/**
* The index into Matrix4 for column 0, row 1.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN0ROW1 = 1;
/**
* The index into Matrix4 for column 0, row 2.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN0ROW2 = 2;
/**
* The index into Matrix4 for column 0, row 3.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN0ROW3 = 3;
/**
* The index into Matrix4 for column 1, row 0.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN1ROW0 = 4;
/**
* The index into Matrix4 for column 1, row 1.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN1ROW1 = 5;
/**
* The index into Matrix4 for column 1, row 2.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN1ROW2 = 6;
/**
* The index into Matrix4 for column 1, row 3.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN1ROW3 = 7;
/**
* The index into Matrix4 for column 2, row 0.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN2ROW0 = 8;
/**
* The index into Matrix4 for column 2, row 1.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN2ROW1 = 9;
/**
* The index into Matrix4 for column 2, row 2.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN2ROW2 = 10;
/**
* The index into Matrix4 for column 2, row 3.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN2ROW3 = 11;
/**
* The index into Matrix4 for column 3, row 0.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN3ROW0 = 12;
/**
* The index into Matrix4 for column 3, row 1.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN3ROW1 = 13;
/**
* The index into Matrix4 for column 3, row 2.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN3ROW2 = 14;
/**
* The index into Matrix4 for column 3, row 3.
*
* @type {Number}
* @constant
*/
Matrix4.COLUMN3ROW3 = 15;
defineProperties(Matrix4.prototype, {
/**
* Gets the number of items in the collection.
* @memberof Matrix4.prototype
*
* @type {Number}
*/
length : {
get : function() {
return Matrix4.packedLength;
}
}
});
/**
* Duplicates the provided Matrix4 instance.
*
* @param {Matrix4} [result] The object onto which to store the result.
* @returns {Matrix4} The modified result parameter or a new Matrix4 instance if one was not provided.
*/
Matrix4.prototype.clone = function(result) {
return Matrix4.clone(this, result);
};
/**
* Compares this matrix to the provided matrix componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Matrix4} [right] The right hand side matrix.
* @returns {Boolean} true if they are equal, false otherwise.
*/
Matrix4.prototype.equals = function(right) {
return Matrix4.equals(this, right);
};
/**
* @private
*/
Matrix4.equalsArray = function(matrix, array, offset) {
return matrix[0] === array[offset] &&
matrix[1] === array[offset + 1] &&
matrix[2] === array[offset + 2] &&
matrix[3] === array[offset + 3] &&
matrix[4] === array[offset + 4] &&
matrix[5] === array[offset + 5] &&
matrix[6] === array[offset + 6] &&
matrix[7] === array[offset + 7] &&
matrix[8] === array[offset + 8] &&
matrix[9] === array[offset + 9] &&
matrix[10] === array[offset + 10] &&
matrix[11] === array[offset + 11] &&
matrix[12] === array[offset + 12] &&
matrix[13] === array[offset + 13] &&
matrix[14] === array[offset + 14] &&
matrix[15] === array[offset + 15];
};
/**
* Compares this matrix to the provided matrix componentwise and returns
* true if they are within the provided epsilon,
* false otherwise.
*
* @param {Matrix4} [right] The right hand side matrix.
* @param {Number} epsilon The epsilon to use for equality testing.
* @returns {Boolean} true if they are within the provided epsilon, false otherwise.
*/
Matrix4.prototype.equalsEpsilon = function(right, epsilon) {
return Matrix4.equalsEpsilon(this, right, epsilon);
};
/**
* Computes a string representing this Matrix with each row being
* on a separate line and in the format '(column0, column1, column2, column3)'.
*
* @returns {String} A string representing the provided Matrix with each row being on a separate line and in the format '(column0, column1, column2, column3)'.
*/
Matrix4.prototype.toString = function() {
return '(' + this[0] + ', ' + this[4] + ', ' + this[8] + ', ' + this[12] +')\n' +
'(' + this[1] + ', ' + this[5] + ', ' + this[9] + ', ' + this[13] +')\n' +
'(' + this[2] + ', ' + this[6] + ', ' + this[10] + ', ' + this[14] +')\n' +
'(' + this[3] + ', ' + this[7] + ', ' + this[11] + ', ' + this[15] +')';
};
return Matrix4;
});
/*global define*/
define('Core/Rectangle',[
'./Cartographic',
'./defaultValue',
'./defined',
'./defineProperties',
'./DeveloperError',
'./Ellipsoid',
'./freezeObject',
'./Math'
], function(
Cartographic,
defaultValue,
defined,
defineProperties,
DeveloperError,
Ellipsoid,
freezeObject,
CesiumMath) {
'use strict';
/**
* A two dimensional region specified as longitude and latitude coordinates.
*
* @alias Rectangle
* @constructor
*
* @param {Number} [west=0.0] The westernmost longitude, in radians, in the range [-Pi, Pi].
* @param {Number} [south=0.0] The southernmost latitude, in radians, in the range [-Pi/2, Pi/2].
* @param {Number} [east=0.0] The easternmost longitude, in radians, in the range [-Pi, Pi].
* @param {Number} [north=0.0] The northernmost latitude, in radians, in the range [-Pi/2, Pi/2].
*
* @see Packable
*/
function Rectangle(west, south, east, north) {
/**
* The westernmost longitude in radians in the range [-Pi, Pi].
*
* @type {Number}
* @default 0.0
*/
this.west = defaultValue(west, 0.0);
/**
* The southernmost latitude in radians in the range [-Pi/2, Pi/2].
*
* @type {Number}
* @default 0.0
*/
this.south = defaultValue(south, 0.0);
/**
* The easternmost longitude in radians in the range [-Pi, Pi].
*
* @type {Number}
* @default 0.0
*/
this.east = defaultValue(east, 0.0);
/**
* The northernmost latitude in radians in the range [-Pi/2, Pi/2].
*
* @type {Number}
* @default 0.0
*/
this.north = defaultValue(north, 0.0);
}
defineProperties(Rectangle.prototype, {
/**
* Gets the width of the rectangle in radians.
* @memberof Rectangle.prototype
* @type {Number}
*/
width : {
get : function() {
return Rectangle.computeWidth(this);
}
},
/**
* Gets the height of the rectangle in radians.
* @memberof Rectangle.prototype
* @type {Number}
*/
height : {
get : function() {
return Rectangle.computeHeight(this);
}
}
});
/**
* The number of elements used to pack the object into an array.
* @type {Number}
*/
Rectangle.packedLength = 4;
/**
* Stores the provided instance into the provided array.
*
* @param {Rectangle} value The value to pack.
* @param {Number[]} array The array to pack into.
* @param {Number} [startingIndex=0] The index into the array at which to start packing the elements.
*
* @returns {Number[]} The array that was packed into
*/
Rectangle.pack = function(value, array, startingIndex) {
if (!defined(value)) {
throw new DeveloperError('value is required');
}
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
array[startingIndex++] = value.west;
array[startingIndex++] = value.south;
array[startingIndex++] = value.east;
array[startingIndex] = value.north;
return array;
};
/**
* Retrieves an instance from a packed array.
*
* @param {Number[]} array The packed array.
* @param {Number} [startingIndex=0] The starting index of the element to be unpacked.
* @param {Rectangle} [result] The object into which to store the result.
* @returns {Rectangle} The modified result parameter or a new Rectangle instance if one was not provided.
*/
Rectangle.unpack = function(array, startingIndex, result) {
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
if (!defined(result)) {
result = new Rectangle();
}
result.west = array[startingIndex++];
result.south = array[startingIndex++];
result.east = array[startingIndex++];
result.north = array[startingIndex];
return result;
};
/**
* Computes the width of a rectangle in radians.
* @param {Rectangle} rectangle The rectangle to compute the width of.
* @returns {Number} The width.
*/
Rectangle.computeWidth = function(rectangle) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required.');
}
var east = rectangle.east;
var west = rectangle.west;
if (east < west) {
east += CesiumMath.TWO_PI;
}
return east - west;
};
/**
* Computes the height of a rectangle in radians.
* @param {Rectangle} rectangle The rectangle to compute the height of.
* @returns {Number} The height.
*/
Rectangle.computeHeight = function(rectangle) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required.');
}
return rectangle.north - rectangle.south;
};
/**
* Creates an rectangle given the boundary longitude and latitude in degrees.
*
* @param {Number} [west=0.0] The westernmost longitude in degrees in the range [-180.0, 180.0].
* @param {Number} [south=0.0] The southernmost latitude in degrees in the range [-90.0, 90.0].
* @param {Number} [east=0.0] The easternmost longitude in degrees in the range [-180.0, 180.0].
* @param {Number} [north=0.0] The northernmost latitude in degrees in the range [-90.0, 90.0].
* @param {Rectangle} [result] The object onto which to store the result, or undefined if a new instance should be created.
* @returns {Rectangle} The modified result parameter or a new Rectangle instance if none was provided.
*
* @example
* var rectangle = Cesium.Rectangle.fromDegrees(0.0, 20.0, 10.0, 30.0);
*/
Rectangle.fromDegrees = function(west, south, east, north, result) {
west = CesiumMath.toRadians(defaultValue(west, 0.0));
south = CesiumMath.toRadians(defaultValue(south, 0.0));
east = CesiumMath.toRadians(defaultValue(east, 0.0));
north = CesiumMath.toRadians(defaultValue(north, 0.0));
if (!defined(result)) {
return new Rectangle(west, south, east, north);
}
result.west = west;
result.south = south;
result.east = east;
result.north = north;
return result;
};
/**
* Creates the smallest possible Rectangle that encloses all positions in the provided array.
*
* @param {Cartographic[]} cartographics The list of Cartographic instances.
* @param {Rectangle} [result] The object onto which to store the result, or undefined if a new instance should be created.
* @returns {Rectangle} The modified result parameter or a new Rectangle instance if none was provided.
*/
Rectangle.fromCartographicArray = function(cartographics, result) {
if (!defined(cartographics)) {
throw new DeveloperError('cartographics is required.');
}
var west = Number.MAX_VALUE;
var east = -Number.MAX_VALUE;
var westOverIDL = Number.MAX_VALUE;
var eastOverIDL = -Number.MAX_VALUE;
var south = Number.MAX_VALUE;
var north = -Number.MAX_VALUE;
for ( var i = 0, len = cartographics.length; i < len; i++) {
var position = cartographics[i];
west = Math.min(west, position.longitude);
east = Math.max(east, position.longitude);
south = Math.min(south, position.latitude);
north = Math.max(north, position.latitude);
var lonAdjusted = position.longitude >= 0 ? position.longitude : position.longitude + CesiumMath.TWO_PI;
westOverIDL = Math.min(westOverIDL, lonAdjusted);
eastOverIDL = Math.max(eastOverIDL, lonAdjusted);
}
if(east - west > eastOverIDL - westOverIDL) {
west = westOverIDL;
east = eastOverIDL;
if (east > CesiumMath.PI) {
east = east - CesiumMath.TWO_PI;
}
if (west > CesiumMath.PI) {
west = west - CesiumMath.TWO_PI;
}
}
if (!defined(result)) {
return new Rectangle(west, south, east, north);
}
result.west = west;
result.south = south;
result.east = east;
result.north = north;
return result;
};
/**
* Creates the smallest possible Rectangle that encloses all positions in the provided array.
*
* @param {Cartesian[]} cartesians The list of Cartesian instances.
* @param {Ellipsoid} [ellipsoid=Ellipsoid.WGS84] The ellipsoid the cartesians are on.
* @param {Rectangle} [result] The object onto which to store the result, or undefined if a new instance should be created.
* @returns {Rectangle} The modified result parameter or a new Rectangle instance if none was provided.
*/
Rectangle.fromCartesianArray = function(cartesians, ellipsoid, result) {
if (!defined(cartesians)) {
throw new DeveloperError('cartesians is required.');
}
var west = Number.MAX_VALUE;
var east = -Number.MAX_VALUE;
var westOverIDL = Number.MAX_VALUE;
var eastOverIDL = -Number.MAX_VALUE;
var south = Number.MAX_VALUE;
var north = -Number.MAX_VALUE;
for ( var i = 0, len = cartesians.length; i < len; i++) {
var position = ellipsoid.cartesianToCartographic(cartesians[i]);
west = Math.min(west, position.longitude);
east = Math.max(east, position.longitude);
south = Math.min(south, position.latitude);
north = Math.max(north, position.latitude);
var lonAdjusted = position.longitude >= 0 ? position.longitude : position.longitude + CesiumMath.TWO_PI;
westOverIDL = Math.min(westOverIDL, lonAdjusted);
eastOverIDL = Math.max(eastOverIDL, lonAdjusted);
}
if(east - west > eastOverIDL - westOverIDL) {
west = westOverIDL;
east = eastOverIDL;
if (east > CesiumMath.PI) {
east = east - CesiumMath.TWO_PI;
}
if (west > CesiumMath.PI) {
west = west - CesiumMath.TWO_PI;
}
}
if (!defined(result)) {
return new Rectangle(west, south, east, north);
}
result.west = west;
result.south = south;
result.east = east;
result.north = north;
return result;
};
/**
* Duplicates an Rectangle.
*
* @param {Rectangle} rectangle The rectangle to clone.
* @param {Rectangle} [result] The object onto which to store the result, or undefined if a new instance should be created.
* @returns {Rectangle} The modified result parameter or a new Rectangle instance if none was provided. (Returns undefined if rectangle is undefined)
*/
Rectangle.clone = function(rectangle, result) {
if (!defined(rectangle)) {
return undefined;
}
if (!defined(result)) {
return new Rectangle(rectangle.west, rectangle.south, rectangle.east, rectangle.north);
}
result.west = rectangle.west;
result.south = rectangle.south;
result.east = rectangle.east;
result.north = rectangle.north;
return result;
};
/**
* Duplicates this Rectangle.
*
* @param {Rectangle} [result] The object onto which to store the result.
* @returns {Rectangle} The modified result parameter or a new Rectangle instance if none was provided.
*/
Rectangle.prototype.clone = function(result) {
return Rectangle.clone(this, result);
};
/**
* Compares the provided Rectangle with this Rectangle componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Rectangle} [other] The Rectangle to compare.
* @returns {Boolean} true if the Rectangles are equal, false otherwise.
*/
Rectangle.prototype.equals = function(other) {
return Rectangle.equals(this, other);
};
/**
* Compares the provided rectangles and returns true if they are equal,
* false otherwise.
*
* @param {Rectangle} [left] The first Rectangle.
* @param {Rectangle} [right] The second Rectangle.
* @returns {Boolean} true if left and right are equal; otherwise false.
*/
Rectangle.equals = function(left, right) {
return (left === right) ||
((defined(left)) &&
(defined(right)) &&
(left.west === right.west) &&
(left.south === right.south) &&
(left.east === right.east) &&
(left.north === right.north));
};
/**
* Compares the provided Rectangle with this Rectangle componentwise and returns
* true if they are within the provided epsilon,
* false otherwise.
*
* @param {Rectangle} [other] The Rectangle to compare.
* @param {Number} epsilon The epsilon to use for equality testing.
* @returns {Boolean} true if the Rectangles are within the provided epsilon, false otherwise.
*/
Rectangle.prototype.equalsEpsilon = function(other, epsilon) {
if (typeof epsilon !== 'number') {
throw new DeveloperError('epsilon is required and must be a number.');
}
return defined(other) &&
(Math.abs(this.west - other.west) <= epsilon) &&
(Math.abs(this.south - other.south) <= epsilon) &&
(Math.abs(this.east - other.east) <= epsilon) &&
(Math.abs(this.north - other.north) <= epsilon);
};
/**
* Checks an Rectangle's properties and throws if they are not in valid ranges.
*
* @param {Rectangle} rectangle The rectangle to validate
*
* @exception {DeveloperError} north must be in the interval [-Pi/2, Pi/2].
* @exception {DeveloperError} south must be in the interval [-Pi/2, Pi/2].
* @exception {DeveloperError} east must be in the interval [-Pi, Pi].
* @exception {DeveloperError} west must be in the interval [-Pi, Pi].
*/
Rectangle.validate = function(rectangle) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required');
}
var north = rectangle.north;
if (typeof north !== 'number') {
throw new DeveloperError('north is required to be a number.');
}
if (north < -CesiumMath.PI_OVER_TWO || north > CesiumMath.PI_OVER_TWO) {
throw new DeveloperError('north must be in the interval [-Pi/2, Pi/2].');
}
var south = rectangle.south;
if (typeof south !== 'number') {
throw new DeveloperError('south is required to be a number.');
}
if (south < -CesiumMath.PI_OVER_TWO || south > CesiumMath.PI_OVER_TWO) {
throw new DeveloperError('south must be in the interval [-Pi/2, Pi/2].');
}
var west = rectangle.west;
if (typeof west !== 'number') {
throw new DeveloperError('west is required to be a number.');
}
if (west < -Math.PI || west > Math.PI) {
throw new DeveloperError('west must be in the interval [-Pi, Pi].');
}
var east = rectangle.east;
if (typeof east !== 'number') {
throw new DeveloperError('east is required to be a number.');
}
if (east < -Math.PI || east > Math.PI) {
throw new DeveloperError('east must be in the interval [-Pi, Pi].');
}
};
/**
* Computes the southwest corner of an rectangle.
*
* @param {Rectangle} rectangle The rectangle for which to find the corner
* @param {Cartographic} [result] The object onto which to store the result.
* @returns {Cartographic} The modified result parameter or a new Cartographic instance if none was provided.
*/
Rectangle.southwest = function(rectangle, result) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required');
}
if (!defined(result)) {
return new Cartographic(rectangle.west, rectangle.south);
}
result.longitude = rectangle.west;
result.latitude = rectangle.south;
result.height = 0.0;
return result;
};
/**
* Computes the northwest corner of an rectangle.
*
* @param {Rectangle} rectangle The rectangle for which to find the corner
* @param {Cartographic} [result] The object onto which to store the result.
* @returns {Cartographic} The modified result parameter or a new Cartographic instance if none was provided.
*/
Rectangle.northwest = function(rectangle, result) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required');
}
if (!defined(result)) {
return new Cartographic(rectangle.west, rectangle.north);
}
result.longitude = rectangle.west;
result.latitude = rectangle.north;
result.height = 0.0;
return result;
};
/**
* Computes the northeast corner of an rectangle.
*
* @param {Rectangle} rectangle The rectangle for which to find the corner
* @param {Cartographic} [result] The object onto which to store the result.
* @returns {Cartographic} The modified result parameter or a new Cartographic instance if none was provided.
*/
Rectangle.northeast = function(rectangle, result) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required');
}
if (!defined(result)) {
return new Cartographic(rectangle.east, rectangle.north);
}
result.longitude = rectangle.east;
result.latitude = rectangle.north;
result.height = 0.0;
return result;
};
/**
* Computes the southeast corner of an rectangle.
*
* @param {Rectangle} rectangle The rectangle for which to find the corner
* @param {Cartographic} [result] The object onto which to store the result.
* @returns {Cartographic} The modified result parameter or a new Cartographic instance if none was provided.
*/
Rectangle.southeast = function(rectangle, result) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required');
}
if (!defined(result)) {
return new Cartographic(rectangle.east, rectangle.south);
}
result.longitude = rectangle.east;
result.latitude = rectangle.south;
result.height = 0.0;
return result;
};
/**
* Computes the center of an rectangle.
*
* @param {Rectangle} rectangle The rectangle for which to find the center
* @param {Cartographic} [result] The object onto which to store the result.
* @returns {Cartographic} The modified result parameter or a new Cartographic instance if none was provided.
*/
Rectangle.center = function(rectangle, result) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required');
}
var east = rectangle.east;
var west = rectangle.west;
if (east < west) {
east += CesiumMath.TWO_PI;
}
var longitude = CesiumMath.negativePiToPi((west + east) * 0.5);
var latitude = (rectangle.south + rectangle.north) * 0.5;
if (!defined(result)) {
return new Cartographic(longitude, latitude);
}
result.longitude = longitude;
result.latitude = latitude;
result.height = 0.0;
return result;
};
/**
* Computes the intersection of two rectangles. This function assumes that the rectangle's coordinates are
* latitude and longitude in radians and produces a correct intersection, taking into account the fact that
* the same angle can be represented with multiple values as well as the wrapping of longitude at the
* anti-meridian. For a simple intersection that ignores these factors and can be used with projected
* coordinates, see {@link Rectangle.simpleIntersection}.
*
* @param {Rectangle} rectangle On rectangle to find an intersection
* @param {Rectangle} otherRectangle Another rectangle to find an intersection
* @param {Rectangle} [result] The object onto which to store the result.
* @returns {Rectangle|undefined} The modified result parameter, a new Rectangle instance if none was provided or undefined if there is no intersection.
*/
Rectangle.intersection = function(rectangle, otherRectangle, result) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required');
}
if (!defined(otherRectangle)) {
throw new DeveloperError('otherRectangle is required.');
}
var rectangleEast = rectangle.east;
var rectangleWest = rectangle.west;
var otherRectangleEast = otherRectangle.east;
var otherRectangleWest = otherRectangle.west;
if (rectangleEast < rectangleWest && otherRectangleEast > 0.0) {
rectangleEast += CesiumMath.TWO_PI;
} else if (otherRectangleEast < otherRectangleWest && rectangleEast > 0.0) {
otherRectangleEast += CesiumMath.TWO_PI;
}
if (rectangleEast < rectangleWest && otherRectangleWest < 0.0) {
otherRectangleWest += CesiumMath.TWO_PI;
} else if (otherRectangleEast < otherRectangleWest && rectangleWest < 0.0) {
rectangleWest += CesiumMath.TWO_PI;
}
var west = CesiumMath.negativePiToPi(Math.max(rectangleWest, otherRectangleWest));
var east = CesiumMath.negativePiToPi(Math.min(rectangleEast, otherRectangleEast));
if ((rectangle.west < rectangle.east || otherRectangle.west < otherRectangle.east) && east <= west) {
return undefined;
}
var south = Math.max(rectangle.south, otherRectangle.south);
var north = Math.min(rectangle.north, otherRectangle.north);
if (south >= north) {
return undefined;
}
if (!defined(result)) {
return new Rectangle(west, south, east, north);
}
result.west = west;
result.south = south;
result.east = east;
result.north = north;
return result;
};
/**
* Computes a simple intersection of two rectangles. Unlike {@link Rectangle.intersection}, this function
* does not attempt to put the angular coordinates into a consistent range or to account for crossing the
* anti-meridian. As such, it can be used for rectangles where the coordinates are not simply latitude
* and longitude (i.e. projected coordinates).
*
* @param {Rectangle} rectangle On rectangle to find an intersection
* @param {Rectangle} otherRectangle Another rectangle to find an intersection
* @param {Rectangle} [result] The object onto which to store the result.
* @returns {Rectangle|undefined} The modified result parameter, a new Rectangle instance if none was provided or undefined if there is no intersection.
*/
Rectangle.simpleIntersection = function(rectangle, otherRectangle, result) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required');
}
if (!defined(otherRectangle)) {
throw new DeveloperError('otherRectangle is required.');
}
var west = Math.max(rectangle.west, otherRectangle.west);
var south = Math.max(rectangle.south, otherRectangle.south);
var east = Math.min(rectangle.east, otherRectangle.east);
var north = Math.min(rectangle.north, otherRectangle.north);
if (south >= north || west >= east) {
return undefined;
}
if (!defined(result)) {
return new Rectangle(west, south, east, north);
}
result.west = west;
result.south = south;
result.east = east;
result.north = north;
return result;
};
/**
* Computes a rectangle that is the union of two rectangles.
*
* @param {Rectangle} rectangle A rectangle to enclose in rectangle.
* @param {Rectangle} otherRectangle A rectangle to enclose in a rectangle.
* @param {Rectangle} [result] The object onto which to store the result.
* @returns {Rectangle} The modified result parameter or a new Rectangle instance if none was provided.
*/
Rectangle.union = function(rectangle, otherRectangle, result) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required');
}
if (!defined(otherRectangle)) {
throw new DeveloperError('otherRectangle is required.');
}
if (!defined(result)) {
result = new Rectangle();
}
var rectangleEast = rectangle.east;
var rectangleWest = rectangle.west;
var otherRectangleEast = otherRectangle.east;
var otherRectangleWest = otherRectangle.west;
if (rectangleEast < rectangleWest && otherRectangleEast > 0.0) {
rectangleEast += CesiumMath.TWO_PI;
} else if (otherRectangleEast < otherRectangleWest && rectangleEast > 0.0) {
otherRectangleEast += CesiumMath.TWO_PI;
}
if (rectangleEast < rectangleWest && otherRectangleWest < 0.0) {
otherRectangleWest += CesiumMath.TWO_PI;
} else if (otherRectangleEast < otherRectangleWest && rectangleWest < 0.0) {
rectangleWest += CesiumMath.TWO_PI;
}
var west = CesiumMath.convertLongitudeRange(Math.min(rectangleWest, otherRectangleWest));
var east = CesiumMath.convertLongitudeRange(Math.max(rectangleEast, otherRectangleEast));
result.west = west;
result.south = Math.min(rectangle.south, otherRectangle.south);
result.east = east;
result.north = Math.max(rectangle.north, otherRectangle.north);
return result;
};
/**
* Computes a rectangle by enlarging the provided rectangle until it contains the provided cartographic.
*
* @param {Rectangle} rectangle A rectangle to expand.
* @param {Cartographic} cartographic A cartographic to enclose in a rectangle.
* @param {Rectangle} [result] The object onto which to store the result.
* @returns {Rectangle} The modified result parameter or a new Rectangle instance if one was not provided.
*/
Rectangle.expand = function(rectangle, cartographic, result) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required.');
}
if (!defined(cartographic)) {
throw new DeveloperError('cartographic is required.');
}
if (!defined(result)) {
result = new Rectangle();
}
result.west = Math.min(rectangle.west, cartographic.longitude);
result.south = Math.min(rectangle.south, cartographic.latitude);
result.east = Math.max(rectangle.east, cartographic.longitude);
result.north = Math.max(rectangle.north, cartographic.latitude);
return result;
};
/**
* Returns true if the cartographic is on or inside the rectangle, false otherwise.
*
* @param {Rectangle} rectangle The rectangle
* @param {Cartographic} cartographic The cartographic to test.
* @returns {Boolean} true if the provided cartographic is inside the rectangle, false otherwise.
*/
Rectangle.contains = function(rectangle, cartographic) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required');
}
if (!defined(cartographic)) {
throw new DeveloperError('cartographic is required.');
}
var longitude = cartographic.longitude;
var latitude = cartographic.latitude;
var west = rectangle.west;
var east = rectangle.east;
if (east < west) {
east += CesiumMath.TWO_PI;
if (longitude < 0.0) {
longitude += CesiumMath.TWO_PI;
}
}
return (longitude > west || CesiumMath.equalsEpsilon(longitude, west, CesiumMath.EPSILON14)) &&
(longitude < east || CesiumMath.equalsEpsilon(longitude, east, CesiumMath.EPSILON14)) &&
latitude >= rectangle.south &&
latitude <= rectangle.north;
};
var subsampleLlaScratch = new Cartographic();
/**
* Samples an rectangle so that it includes a list of Cartesian points suitable for passing to
* {@link BoundingSphere#fromPoints}. Sampling is necessary to account
* for rectangles that cover the poles or cross the equator.
*
* @param {Rectangle} rectangle The rectangle to subsample.
* @param {Ellipsoid} [ellipsoid=Ellipsoid.WGS84] The ellipsoid to use.
* @param {Number} [surfaceHeight=0.0] The height of the rectangle above the ellipsoid.
* @param {Cartesian3[]} [result] The array of Cartesians onto which to store the result.
* @returns {Cartesian3[]} The modified result parameter or a new Array of Cartesians instances if none was provided.
*/
Rectangle.subsample = function(rectangle, ellipsoid, surfaceHeight, result) {
if (!defined(rectangle)) {
throw new DeveloperError('rectangle is required');
}
ellipsoid = defaultValue(ellipsoid, Ellipsoid.WGS84);
surfaceHeight = defaultValue(surfaceHeight, 0.0);
if (!defined(result)) {
result = [];
}
var length = 0;
var north = rectangle.north;
var south = rectangle.south;
var east = rectangle.east;
var west = rectangle.west;
var lla = subsampleLlaScratch;
lla.height = surfaceHeight;
lla.longitude = west;
lla.latitude = north;
result[length] = ellipsoid.cartographicToCartesian(lla, result[length]);
length++;
lla.longitude = east;
result[length] = ellipsoid.cartographicToCartesian(lla, result[length]);
length++;
lla.latitude = south;
result[length] = ellipsoid.cartographicToCartesian(lla, result[length]);
length++;
lla.longitude = west;
result[length] = ellipsoid.cartographicToCartesian(lla, result[length]);
length++;
if (north < 0.0) {
lla.latitude = north;
} else if (south > 0.0) {
lla.latitude = south;
} else {
lla.latitude = 0.0;
}
for ( var i = 1; i < 8; ++i) {
lla.longitude = -Math.PI + i * CesiumMath.PI_OVER_TWO;
if (Rectangle.contains(rectangle, lla)) {
result[length] = ellipsoid.cartographicToCartesian(lla, result[length]);
length++;
}
}
if (lla.latitude === 0.0) {
lla.longitude = west;
result[length] = ellipsoid.cartographicToCartesian(lla, result[length]);
length++;
lla.longitude = east;
result[length] = ellipsoid.cartographicToCartesian(lla, result[length]);
length++;
}
result.length = length;
return result;
};
/**
* The largest possible rectangle.
*
* @type {Rectangle}
* @constant
*/
Rectangle.MAX_VALUE = freezeObject(new Rectangle(-Math.PI, -CesiumMath.PI_OVER_TWO, Math.PI, CesiumMath.PI_OVER_TWO));
return Rectangle;
});
/*global define*/
define('Core/BoundingSphere',[
'./Cartesian3',
'./Cartographic',
'./defaultValue',
'./defined',
'./DeveloperError',
'./Ellipsoid',
'./GeographicProjection',
'./Intersect',
'./Interval',
'./Matrix3',
'./Matrix4',
'./Rectangle'
], function(
Cartesian3,
Cartographic,
defaultValue,
defined,
DeveloperError,
Ellipsoid,
GeographicProjection,
Intersect,
Interval,
Matrix3,
Matrix4,
Rectangle) {
'use strict';
/**
* A bounding sphere with a center and a radius.
* @alias BoundingSphere
* @constructor
*
* @param {Cartesian3} [center=Cartesian3.ZERO] The center of the bounding sphere.
* @param {Number} [radius=0.0] The radius of the bounding sphere.
*
* @see AxisAlignedBoundingBox
* @see BoundingRectangle
* @see Packable
*/
function BoundingSphere(center, radius) {
/**
* The center point of the sphere.
* @type {Cartesian3}
* @default {@link Cartesian3.ZERO}
*/
this.center = Cartesian3.clone(defaultValue(center, Cartesian3.ZERO));
/**
* The radius of the sphere.
* @type {Number}
* @default 0.0
*/
this.radius = defaultValue(radius, 0.0);
}
var fromPointsXMin = new Cartesian3();
var fromPointsYMin = new Cartesian3();
var fromPointsZMin = new Cartesian3();
var fromPointsXMax = new Cartesian3();
var fromPointsYMax = new Cartesian3();
var fromPointsZMax = new Cartesian3();
var fromPointsCurrentPos = new Cartesian3();
var fromPointsScratch = new Cartesian3();
var fromPointsRitterCenter = new Cartesian3();
var fromPointsMinBoxPt = new Cartesian3();
var fromPointsMaxBoxPt = new Cartesian3();
var fromPointsNaiveCenterScratch = new Cartesian3();
/**
* Computes a tight-fitting bounding sphere enclosing a list of 3D Cartesian points.
* The bounding sphere is computed by running two algorithms, a naive algorithm and
* Ritter's algorithm. The smaller of the two spheres is used to ensure a tight fit.
*
* @param {Cartesian3[]} positions An array of points that the bounding sphere will enclose. Each point must have x, y, and z properties.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if one was not provided.
*
* @see {@link http://blogs.agi.com/insight3d/index.php/2008/02/04/a-bounding/|Bounding Sphere computation article}
*/
BoundingSphere.fromPoints = function(positions, result) {
if (!defined(result)) {
result = new BoundingSphere();
}
if (!defined(positions) || positions.length === 0) {
result.center = Cartesian3.clone(Cartesian3.ZERO, result.center);
result.radius = 0.0;
return result;
}
var currentPos = Cartesian3.clone(positions[0], fromPointsCurrentPos);
var xMin = Cartesian3.clone(currentPos, fromPointsXMin);
var yMin = Cartesian3.clone(currentPos, fromPointsYMin);
var zMin = Cartesian3.clone(currentPos, fromPointsZMin);
var xMax = Cartesian3.clone(currentPos, fromPointsXMax);
var yMax = Cartesian3.clone(currentPos, fromPointsYMax);
var zMax = Cartesian3.clone(currentPos, fromPointsZMax);
var numPositions = positions.length;
for (var i = 1; i < numPositions; i++) {
Cartesian3.clone(positions[i], currentPos);
var x = currentPos.x;
var y = currentPos.y;
var z = currentPos.z;
// Store points containing the the smallest and largest components
if (x < xMin.x) {
Cartesian3.clone(currentPos, xMin);
}
if (x > xMax.x) {
Cartesian3.clone(currentPos, xMax);
}
if (y < yMin.y) {
Cartesian3.clone(currentPos, yMin);
}
if (y > yMax.y) {
Cartesian3.clone(currentPos, yMax);
}
if (z < zMin.z) {
Cartesian3.clone(currentPos, zMin);
}
if (z > zMax.z) {
Cartesian3.clone(currentPos, zMax);
}
}
// Compute x-, y-, and z-spans (Squared distances b/n each component's min. and max.).
var xSpan = Cartesian3.magnitudeSquared(Cartesian3.subtract(xMax, xMin, fromPointsScratch));
var ySpan = Cartesian3.magnitudeSquared(Cartesian3.subtract(yMax, yMin, fromPointsScratch));
var zSpan = Cartesian3.magnitudeSquared(Cartesian3.subtract(zMax, zMin, fromPointsScratch));
// Set the diameter endpoints to the largest span.
var diameter1 = xMin;
var diameter2 = xMax;
var maxSpan = xSpan;
if (ySpan > maxSpan) {
maxSpan = ySpan;
diameter1 = yMin;
diameter2 = yMax;
}
if (zSpan > maxSpan) {
maxSpan = zSpan;
diameter1 = zMin;
diameter2 = zMax;
}
// Calculate the center of the initial sphere found by Ritter's algorithm
var ritterCenter = fromPointsRitterCenter;
ritterCenter.x = (diameter1.x + diameter2.x) * 0.5;
ritterCenter.y = (diameter1.y + diameter2.y) * 0.5;
ritterCenter.z = (diameter1.z + diameter2.z) * 0.5;
// Calculate the radius of the initial sphere found by Ritter's algorithm
var radiusSquared = Cartesian3.magnitudeSquared(Cartesian3.subtract(diameter2, ritterCenter, fromPointsScratch));
var ritterRadius = Math.sqrt(radiusSquared);
// Find the center of the sphere found using the Naive method.
var minBoxPt = fromPointsMinBoxPt;
minBoxPt.x = xMin.x;
minBoxPt.y = yMin.y;
minBoxPt.z = zMin.z;
var maxBoxPt = fromPointsMaxBoxPt;
maxBoxPt.x = xMax.x;
maxBoxPt.y = yMax.y;
maxBoxPt.z = zMax.z;
var naiveCenter = Cartesian3.multiplyByScalar(Cartesian3.add(minBoxPt, maxBoxPt, fromPointsScratch), 0.5, fromPointsNaiveCenterScratch);
// Begin 2nd pass to find naive radius and modify the ritter sphere.
var naiveRadius = 0;
for (i = 0; i < numPositions; i++) {
Cartesian3.clone(positions[i], currentPos);
// Find the furthest point from the naive center to calculate the naive radius.
var r = Cartesian3.magnitude(Cartesian3.subtract(currentPos, naiveCenter, fromPointsScratch));
if (r > naiveRadius) {
naiveRadius = r;
}
// Make adjustments to the Ritter Sphere to include all points.
var oldCenterToPointSquared = Cartesian3.magnitudeSquared(Cartesian3.subtract(currentPos, ritterCenter, fromPointsScratch));
if (oldCenterToPointSquared > radiusSquared) {
var oldCenterToPoint = Math.sqrt(oldCenterToPointSquared);
// Calculate new radius to include the point that lies outside
ritterRadius = (ritterRadius + oldCenterToPoint) * 0.5;
radiusSquared = ritterRadius * ritterRadius;
// Calculate center of new Ritter sphere
var oldToNew = oldCenterToPoint - ritterRadius;
ritterCenter.x = (ritterRadius * ritterCenter.x + oldToNew * currentPos.x) / oldCenterToPoint;
ritterCenter.y = (ritterRadius * ritterCenter.y + oldToNew * currentPos.y) / oldCenterToPoint;
ritterCenter.z = (ritterRadius * ritterCenter.z + oldToNew * currentPos.z) / oldCenterToPoint;
}
}
if (ritterRadius < naiveRadius) {
Cartesian3.clone(ritterCenter, result.center);
result.radius = ritterRadius;
} else {
Cartesian3.clone(naiveCenter, result.center);
result.radius = naiveRadius;
}
return result;
};
var defaultProjection = new GeographicProjection();
var fromRectangle2DLowerLeft = new Cartesian3();
var fromRectangle2DUpperRight = new Cartesian3();
var fromRectangle2DSouthwest = new Cartographic();
var fromRectangle2DNortheast = new Cartographic();
/**
* Computes a bounding sphere from an rectangle projected in 2D.
*
* @param {Rectangle} rectangle The rectangle around which to create a bounding sphere.
* @param {Object} [projection=GeographicProjection] The projection used to project the rectangle into 2D.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*/
BoundingSphere.fromRectangle2D = function(rectangle, projection, result) {
return BoundingSphere.fromRectangleWithHeights2D(rectangle, projection, 0.0, 0.0, result);
};
/**
* Computes a bounding sphere from an rectangle projected in 2D. The bounding sphere accounts for the
* object's minimum and maximum heights over the rectangle.
*
* @param {Rectangle} rectangle The rectangle around which to create a bounding sphere.
* @param {Object} [projection=GeographicProjection] The projection used to project the rectangle into 2D.
* @param {Number} [minimumHeight=0.0] The minimum height over the rectangle.
* @param {Number} [maximumHeight=0.0] The maximum height over the rectangle.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*/
BoundingSphere.fromRectangleWithHeights2D = function(rectangle, projection, minimumHeight, maximumHeight, result) {
if (!defined(result)) {
result = new BoundingSphere();
}
if (!defined(rectangle)) {
result.center = Cartesian3.clone(Cartesian3.ZERO, result.center);
result.radius = 0.0;
return result;
}
projection = defaultValue(projection, defaultProjection);
Rectangle.southwest(rectangle, fromRectangle2DSouthwest);
fromRectangle2DSouthwest.height = minimumHeight;
Rectangle.northeast(rectangle, fromRectangle2DNortheast);
fromRectangle2DNortheast.height = maximumHeight;
var lowerLeft = projection.project(fromRectangle2DSouthwest, fromRectangle2DLowerLeft);
var upperRight = projection.project(fromRectangle2DNortheast, fromRectangle2DUpperRight);
var width = upperRight.x - lowerLeft.x;
var height = upperRight.y - lowerLeft.y;
var elevation = upperRight.z - lowerLeft.z;
result.radius = Math.sqrt(width * width + height * height + elevation * elevation) * 0.5;
var center = result.center;
center.x = lowerLeft.x + width * 0.5;
center.y = lowerLeft.y + height * 0.5;
center.z = lowerLeft.z + elevation * 0.5;
return result;
};
var fromRectangle3DScratch = [];
/**
* Computes a bounding sphere from an rectangle in 3D. The bounding sphere is created using a subsample of points
* on the ellipsoid and contained in the rectangle. It may not be accurate for all rectangles on all types of ellipsoids.
*
* @param {Rectangle} rectangle The valid rectangle used to create a bounding sphere.
* @param {Ellipsoid} [ellipsoid=Ellipsoid.WGS84] The ellipsoid used to determine positions of the rectangle.
* @param {Number} [surfaceHeight=0.0] The height above the surface of the ellipsoid.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*/
BoundingSphere.fromRectangle3D = function(rectangle, ellipsoid, surfaceHeight, result) {
ellipsoid = defaultValue(ellipsoid, Ellipsoid.WGS84);
surfaceHeight = defaultValue(surfaceHeight, 0.0);
var positions;
if (defined(rectangle)) {
positions = Rectangle.subsample(rectangle, ellipsoid, surfaceHeight, fromRectangle3DScratch);
}
return BoundingSphere.fromPoints(positions, result);
};
/**
* Computes a tight-fitting bounding sphere enclosing a list of 3D points, where the points are
* stored in a flat array in X, Y, Z, order. The bounding sphere is computed by running two
* algorithms, a naive algorithm and Ritter's algorithm. The smaller of the two spheres is used to
* ensure a tight fit.
*
* @param {Number[]} positions An array of points that the bounding sphere will enclose. Each point
* is formed from three elements in the array in the order X, Y, Z.
* @param {Cartesian3} [center=Cartesian3.ZERO] The position to which the positions are relative, which need not be the
* origin of the coordinate system. This is useful when the positions are to be used for
* relative-to-center (RTC) rendering.
* @param {Number} [stride=3] The number of array elements per vertex. It must be at least 3, but it may
* be higher. Regardless of the value of this parameter, the X coordinate of the first position
* is at array index 0, the Y coordinate is at array index 1, and the Z coordinate is at array index
* 2. When stride is 3, the X coordinate of the next position then begins at array index 3. If
* the stride is 5, however, two array elements are skipped and the next position begins at array
* index 5.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if one was not provided.
*
* @example
* // Compute the bounding sphere from 3 positions, each specified relative to a center.
* // In addition to the X, Y, and Z coordinates, the points array contains two additional
* // elements per point which are ignored for the purpose of computing the bounding sphere.
* var center = new Cesium.Cartesian3(1.0, 2.0, 3.0);
* var points = [1.0, 2.0, 3.0, 0.1, 0.2,
* 4.0, 5.0, 6.0, 0.1, 0.2,
* 7.0, 8.0, 9.0, 0.1, 0.2];
* var sphere = Cesium.BoundingSphere.fromVertices(points, center, 5);
*
* @see {@link http://blogs.agi.com/insight3d/index.php/2008/02/04/a-bounding/|Bounding Sphere computation article}
*/
BoundingSphere.fromVertices = function(positions, center, stride, result) {
if (!defined(result)) {
result = new BoundingSphere();
}
if (!defined(positions) || positions.length === 0) {
result.center = Cartesian3.clone(Cartesian3.ZERO, result.center);
result.radius = 0.0;
return result;
}
center = defaultValue(center, Cartesian3.ZERO);
stride = defaultValue(stride, 3);
if (stride < 3) {
throw new DeveloperError('stride must be 3 or greater.');
}
var currentPos = fromPointsCurrentPos;
currentPos.x = positions[0] + center.x;
currentPos.y = positions[1] + center.y;
currentPos.z = positions[2] + center.z;
var xMin = Cartesian3.clone(currentPos, fromPointsXMin);
var yMin = Cartesian3.clone(currentPos, fromPointsYMin);
var zMin = Cartesian3.clone(currentPos, fromPointsZMin);
var xMax = Cartesian3.clone(currentPos, fromPointsXMax);
var yMax = Cartesian3.clone(currentPos, fromPointsYMax);
var zMax = Cartesian3.clone(currentPos, fromPointsZMax);
var numElements = positions.length;
for (var i = 0; i < numElements; i += stride) {
var x = positions[i] + center.x;
var y = positions[i + 1] + center.y;
var z = positions[i + 2] + center.z;
currentPos.x = x;
currentPos.y = y;
currentPos.z = z;
// Store points containing the the smallest and largest components
if (x < xMin.x) {
Cartesian3.clone(currentPos, xMin);
}
if (x > xMax.x) {
Cartesian3.clone(currentPos, xMax);
}
if (y < yMin.y) {
Cartesian3.clone(currentPos, yMin);
}
if (y > yMax.y) {
Cartesian3.clone(currentPos, yMax);
}
if (z < zMin.z) {
Cartesian3.clone(currentPos, zMin);
}
if (z > zMax.z) {
Cartesian3.clone(currentPos, zMax);
}
}
// Compute x-, y-, and z-spans (Squared distances b/n each component's min. and max.).
var xSpan = Cartesian3.magnitudeSquared(Cartesian3.subtract(xMax, xMin, fromPointsScratch));
var ySpan = Cartesian3.magnitudeSquared(Cartesian3.subtract(yMax, yMin, fromPointsScratch));
var zSpan = Cartesian3.magnitudeSquared(Cartesian3.subtract(zMax, zMin, fromPointsScratch));
// Set the diameter endpoints to the largest span.
var diameter1 = xMin;
var diameter2 = xMax;
var maxSpan = xSpan;
if (ySpan > maxSpan) {
maxSpan = ySpan;
diameter1 = yMin;
diameter2 = yMax;
}
if (zSpan > maxSpan) {
maxSpan = zSpan;
diameter1 = zMin;
diameter2 = zMax;
}
// Calculate the center of the initial sphere found by Ritter's algorithm
var ritterCenter = fromPointsRitterCenter;
ritterCenter.x = (diameter1.x + diameter2.x) * 0.5;
ritterCenter.y = (diameter1.y + diameter2.y) * 0.5;
ritterCenter.z = (diameter1.z + diameter2.z) * 0.5;
// Calculate the radius of the initial sphere found by Ritter's algorithm
var radiusSquared = Cartesian3.magnitudeSquared(Cartesian3.subtract(diameter2, ritterCenter, fromPointsScratch));
var ritterRadius = Math.sqrt(radiusSquared);
// Find the center of the sphere found using the Naive method.
var minBoxPt = fromPointsMinBoxPt;
minBoxPt.x = xMin.x;
minBoxPt.y = yMin.y;
minBoxPt.z = zMin.z;
var maxBoxPt = fromPointsMaxBoxPt;
maxBoxPt.x = xMax.x;
maxBoxPt.y = yMax.y;
maxBoxPt.z = zMax.z;
var naiveCenter = Cartesian3.multiplyByScalar(Cartesian3.add(minBoxPt, maxBoxPt, fromPointsScratch), 0.5, fromPointsNaiveCenterScratch);
// Begin 2nd pass to find naive radius and modify the ritter sphere.
var naiveRadius = 0;
for (i = 0; i < numElements; i += stride) {
currentPos.x = positions[i] + center.x;
currentPos.y = positions[i + 1] + center.y;
currentPos.z = positions[i + 2] + center.z;
// Find the furthest point from the naive center to calculate the naive radius.
var r = Cartesian3.magnitude(Cartesian3.subtract(currentPos, naiveCenter, fromPointsScratch));
if (r > naiveRadius) {
naiveRadius = r;
}
// Make adjustments to the Ritter Sphere to include all points.
var oldCenterToPointSquared = Cartesian3.magnitudeSquared(Cartesian3.subtract(currentPos, ritterCenter, fromPointsScratch));
if (oldCenterToPointSquared > radiusSquared) {
var oldCenterToPoint = Math.sqrt(oldCenterToPointSquared);
// Calculate new radius to include the point that lies outside
ritterRadius = (ritterRadius + oldCenterToPoint) * 0.5;
radiusSquared = ritterRadius * ritterRadius;
// Calculate center of new Ritter sphere
var oldToNew = oldCenterToPoint - ritterRadius;
ritterCenter.x = (ritterRadius * ritterCenter.x + oldToNew * currentPos.x) / oldCenterToPoint;
ritterCenter.y = (ritterRadius * ritterCenter.y + oldToNew * currentPos.y) / oldCenterToPoint;
ritterCenter.z = (ritterRadius * ritterCenter.z + oldToNew * currentPos.z) / oldCenterToPoint;
}
}
if (ritterRadius < naiveRadius) {
Cartesian3.clone(ritterCenter, result.center);
result.radius = ritterRadius;
} else {
Cartesian3.clone(naiveCenter, result.center);
result.radius = naiveRadius;
}
return result;
};
/**
* Computes a tight-fitting bounding sphere enclosing a list of {@link EncodedCartesian3}s, where the points are
* stored in parallel flat arrays in X, Y, Z, order. The bounding sphere is computed by running two
* algorithms, a naive algorithm and Ritter's algorithm. The smaller of the two spheres is used to
* ensure a tight fit.
*
* @param {Number[]} positionsHigh An array of high bits of the encoded cartesians that the bounding sphere will enclose. Each point
* is formed from three elements in the array in the order X, Y, Z.
* @param {Number[]} positionsLow An array of low bits of the encoded cartesians that the bounding sphere will enclose. Each point
* is formed from three elements in the array in the order X, Y, Z.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if one was not provided.
*
* @see {@link http://blogs.agi.com/insight3d/index.php/2008/02/04/a-bounding/|Bounding Sphere computation article}
*/
BoundingSphere.fromEncodedCartesianVertices = function(positionsHigh, positionsLow, result) {
if (!defined(result)) {
result = new BoundingSphere();
}
if (!defined(positionsHigh) || !defined(positionsLow) || positionsHigh.length !== positionsLow.length || positionsHigh.length === 0) {
result.center = Cartesian3.clone(Cartesian3.ZERO, result.center);
result.radius = 0.0;
return result;
}
var currentPos = fromPointsCurrentPos;
currentPos.x = positionsHigh[0] + positionsLow[0];
currentPos.y = positionsHigh[1] + positionsLow[1];
currentPos.z = positionsHigh[2] + positionsLow[2];
var xMin = Cartesian3.clone(currentPos, fromPointsXMin);
var yMin = Cartesian3.clone(currentPos, fromPointsYMin);
var zMin = Cartesian3.clone(currentPos, fromPointsZMin);
var xMax = Cartesian3.clone(currentPos, fromPointsXMax);
var yMax = Cartesian3.clone(currentPos, fromPointsYMax);
var zMax = Cartesian3.clone(currentPos, fromPointsZMax);
var numElements = positionsHigh.length;
for (var i = 0; i < numElements; i += 3) {
var x = positionsHigh[i] + positionsLow[i];
var y = positionsHigh[i + 1] + positionsLow[i + 1];
var z = positionsHigh[i + 2] + positionsLow[i + 2];
currentPos.x = x;
currentPos.y = y;
currentPos.z = z;
// Store points containing the the smallest and largest components
if (x < xMin.x) {
Cartesian3.clone(currentPos, xMin);
}
if (x > xMax.x) {
Cartesian3.clone(currentPos, xMax);
}
if (y < yMin.y) {
Cartesian3.clone(currentPos, yMin);
}
if (y > yMax.y) {
Cartesian3.clone(currentPos, yMax);
}
if (z < zMin.z) {
Cartesian3.clone(currentPos, zMin);
}
if (z > zMax.z) {
Cartesian3.clone(currentPos, zMax);
}
}
// Compute x-, y-, and z-spans (Squared distances b/n each component's min. and max.).
var xSpan = Cartesian3.magnitudeSquared(Cartesian3.subtract(xMax, xMin, fromPointsScratch));
var ySpan = Cartesian3.magnitudeSquared(Cartesian3.subtract(yMax, yMin, fromPointsScratch));
var zSpan = Cartesian3.magnitudeSquared(Cartesian3.subtract(zMax, zMin, fromPointsScratch));
// Set the diameter endpoints to the largest span.
var diameter1 = xMin;
var diameter2 = xMax;
var maxSpan = xSpan;
if (ySpan > maxSpan) {
maxSpan = ySpan;
diameter1 = yMin;
diameter2 = yMax;
}
if (zSpan > maxSpan) {
maxSpan = zSpan;
diameter1 = zMin;
diameter2 = zMax;
}
// Calculate the center of the initial sphere found by Ritter's algorithm
var ritterCenter = fromPointsRitterCenter;
ritterCenter.x = (diameter1.x + diameter2.x) * 0.5;
ritterCenter.y = (diameter1.y + diameter2.y) * 0.5;
ritterCenter.z = (diameter1.z + diameter2.z) * 0.5;
// Calculate the radius of the initial sphere found by Ritter's algorithm
var radiusSquared = Cartesian3.magnitudeSquared(Cartesian3.subtract(diameter2, ritterCenter, fromPointsScratch));
var ritterRadius = Math.sqrt(radiusSquared);
// Find the center of the sphere found using the Naive method.
var minBoxPt = fromPointsMinBoxPt;
minBoxPt.x = xMin.x;
minBoxPt.y = yMin.y;
minBoxPt.z = zMin.z;
var maxBoxPt = fromPointsMaxBoxPt;
maxBoxPt.x = xMax.x;
maxBoxPt.y = yMax.y;
maxBoxPt.z = zMax.z;
var naiveCenter = Cartesian3.multiplyByScalar(Cartesian3.add(minBoxPt, maxBoxPt, fromPointsScratch), 0.5, fromPointsNaiveCenterScratch);
// Begin 2nd pass to find naive radius and modify the ritter sphere.
var naiveRadius = 0;
for (i = 0; i < numElements; i += 3) {
currentPos.x = positionsHigh[i] + positionsLow[i];
currentPos.y = positionsHigh[i + 1] + positionsLow[i + 1];
currentPos.z = positionsHigh[i + 2] + positionsLow[i + 2];
// Find the furthest point from the naive center to calculate the naive radius.
var r = Cartesian3.magnitude(Cartesian3.subtract(currentPos, naiveCenter, fromPointsScratch));
if (r > naiveRadius) {
naiveRadius = r;
}
// Make adjustments to the Ritter Sphere to include all points.
var oldCenterToPointSquared = Cartesian3.magnitudeSquared(Cartesian3.subtract(currentPos, ritterCenter, fromPointsScratch));
if (oldCenterToPointSquared > radiusSquared) {
var oldCenterToPoint = Math.sqrt(oldCenterToPointSquared);
// Calculate new radius to include the point that lies outside
ritterRadius = (ritterRadius + oldCenterToPoint) * 0.5;
radiusSquared = ritterRadius * ritterRadius;
// Calculate center of new Ritter sphere
var oldToNew = oldCenterToPoint - ritterRadius;
ritterCenter.x = (ritterRadius * ritterCenter.x + oldToNew * currentPos.x) / oldCenterToPoint;
ritterCenter.y = (ritterRadius * ritterCenter.y + oldToNew * currentPos.y) / oldCenterToPoint;
ritterCenter.z = (ritterRadius * ritterCenter.z + oldToNew * currentPos.z) / oldCenterToPoint;
}
}
if (ritterRadius < naiveRadius) {
Cartesian3.clone(ritterCenter, result.center);
result.radius = ritterRadius;
} else {
Cartesian3.clone(naiveCenter, result.center);
result.radius = naiveRadius;
}
return result;
};
/**
* Computes a bounding sphere from the corner points of an axis-aligned bounding box. The sphere
* tighly and fully encompases the box.
*
* @param {Cartesian3} [corner] The minimum height over the rectangle.
* @param {Cartesian3} [oppositeCorner] The maximum height over the rectangle.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*
* @example
* // Create a bounding sphere around the unit cube
* var sphere = Cesium.BoundingSphere.fromCornerPoints(new Cesium.Cartesian3(-0.5, -0.5, -0.5), new Cesium.Cartesian3(0.5, 0.5, 0.5));
*/
BoundingSphere.fromCornerPoints = function(corner, oppositeCorner, result) {
if (!defined(corner) || !defined(oppositeCorner)) {
throw new DeveloperError('corner and oppositeCorner are required.');
}
if (!defined(result)) {
result = new BoundingSphere();
}
var center = result.center;
Cartesian3.add(corner, oppositeCorner, center);
Cartesian3.multiplyByScalar(center, 0.5, center);
result.radius = Cartesian3.distance(center, oppositeCorner);
return result;
};
/**
* Creates a bounding sphere encompassing an ellipsoid.
*
* @param {Ellipsoid} ellipsoid The ellipsoid around which to create a bounding sphere.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*
* @example
* var boundingSphere = Cesium.BoundingSphere.fromEllipsoid(ellipsoid);
*/
BoundingSphere.fromEllipsoid = function(ellipsoid, result) {
if (!defined(ellipsoid)) {
throw new DeveloperError('ellipsoid is required.');
}
if (!defined(result)) {
result = new BoundingSphere();
}
Cartesian3.clone(Cartesian3.ZERO, result.center);
result.radius = ellipsoid.maximumRadius;
return result;
};
var fromBoundingSpheresScratch = new Cartesian3();
/**
* Computes a tight-fitting bounding sphere enclosing the provided array of bounding spheres.
*
* @param {BoundingSphere[]} boundingSpheres The array of bounding spheres.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*/
BoundingSphere.fromBoundingSpheres = function(boundingSpheres, result) {
if (!defined(result)) {
result = new BoundingSphere();
}
if (!defined(boundingSpheres) || boundingSpheres.length === 0) {
result.center = Cartesian3.clone(Cartesian3.ZERO, result.center);
result.radius = 0.0;
return result;
}
var length = boundingSpheres.length;
if (length === 1) {
return BoundingSphere.clone(boundingSpheres[0], result);
}
if (length === 2) {
return BoundingSphere.union(boundingSpheres[0], boundingSpheres[1], result);
}
var positions = [];
for (var i = 0; i < length; i++) {
positions.push(boundingSpheres[i].center);
}
result = BoundingSphere.fromPoints(positions, result);
var center = result.center;
var radius = result.radius;
for (i = 0; i < length; i++) {
var tmp = boundingSpheres[i];
radius = Math.max(radius, Cartesian3.distance(center, tmp.center, fromBoundingSpheresScratch) + tmp.radius);
}
result.radius = radius;
return result;
};
var fromOrientedBoundingBoxScratchU = new Cartesian3();
var fromOrientedBoundingBoxScratchV = new Cartesian3();
var fromOrientedBoundingBoxScratchW = new Cartesian3();
/**
* Computes a tight-fitting bounding sphere enclosing the provided oriented bounding box.
*
* @param {OrientedBoundingBox} orientedBoundingBox The oriented bounding box.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*/
BoundingSphere.fromOrientedBoundingBox = function(orientedBoundingBox, result) {
if (!defined(result)) {
result = new BoundingSphere();
}
var halfAxes = orientedBoundingBox.halfAxes;
var u = Matrix3.getColumn(halfAxes, 0, fromOrientedBoundingBoxScratchU);
var v = Matrix3.getColumn(halfAxes, 1, fromOrientedBoundingBoxScratchV);
var w = Matrix3.getColumn(halfAxes, 2, fromOrientedBoundingBoxScratchW);
var uHalf = Cartesian3.magnitude(u);
var vHalf = Cartesian3.magnitude(v);
var wHalf = Cartesian3.magnitude(w);
result.center = Cartesian3.clone(orientedBoundingBox.center, result.center);
result.radius = Math.max(uHalf, vHalf, wHalf);
return result;
};
/**
* Duplicates a BoundingSphere instance.
*
* @param {BoundingSphere} sphere The bounding sphere to duplicate.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided. (Returns undefined if sphere is undefined)
*/
BoundingSphere.clone = function(sphere, result) {
if (!defined(sphere)) {
return undefined;
}
if (!defined(result)) {
return new BoundingSphere(sphere.center, sphere.radius);
}
result.center = Cartesian3.clone(sphere.center, result.center);
result.radius = sphere.radius;
return result;
};
/**
* The number of elements used to pack the object into an array.
* @type {Number}
*/
BoundingSphere.packedLength = 4;
/**
* Stores the provided instance into the provided array.
*
* @param {BoundingSphere} value The value to pack.
* @param {Number[]} array The array to pack into.
* @param {Number} [startingIndex=0] The index into the array at which to start packing the elements.
*
* @returns {Number[]} The array that was packed into
*/
BoundingSphere.pack = function(value, array, startingIndex) {
if (!defined(value)) {
throw new DeveloperError('value is required');
}
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
var center = value.center;
array[startingIndex++] = center.x;
array[startingIndex++] = center.y;
array[startingIndex++] = center.z;
array[startingIndex] = value.radius;
return array;
};
/**
* Retrieves an instance from a packed array.
*
* @param {Number[]} array The packed array.
* @param {Number} [startingIndex=0] The starting index of the element to be unpacked.
* @param {BoundingSphere} [result] The object into which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if one was not provided.
*/
BoundingSphere.unpack = function(array, startingIndex, result) {
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
if (!defined(result)) {
result = new BoundingSphere();
}
var center = result.center;
center.x = array[startingIndex++];
center.y = array[startingIndex++];
center.z = array[startingIndex++];
result.radius = array[startingIndex];
return result;
};
var unionScratch = new Cartesian3();
var unionScratchCenter = new Cartesian3();
/**
* Computes a bounding sphere that contains both the left and right bounding spheres.
*
* @param {BoundingSphere} left A sphere to enclose in a bounding sphere.
* @param {BoundingSphere} right A sphere to enclose in a bounding sphere.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*/
BoundingSphere.union = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required.');
}
if (!defined(right)) {
throw new DeveloperError('right is required.');
}
if (!defined(result)) {
result = new BoundingSphere();
}
var leftCenter = left.center;
var leftRadius = left.radius;
var rightCenter = right.center;
var rightRadius = right.radius;
var toRightCenter = Cartesian3.subtract(rightCenter, leftCenter, unionScratch);
var centerSeparation = Cartesian3.magnitude(toRightCenter);
if (leftRadius >= (centerSeparation + rightRadius)) {
// Left sphere wins.
left.clone(result);
return result;
}
if (rightRadius >= (centerSeparation + leftRadius)) {
// Right sphere wins.
right.clone(result);
return result;
}
// There are two tangent points, one on far side of each sphere.
var halfDistanceBetweenTangentPoints = (leftRadius + centerSeparation + rightRadius) * 0.5;
// Compute the center point halfway between the two tangent points.
var center = Cartesian3.multiplyByScalar(toRightCenter,
(-leftRadius + halfDistanceBetweenTangentPoints) / centerSeparation, unionScratchCenter);
Cartesian3.add(center, leftCenter, center);
Cartesian3.clone(center, result.center);
result.radius = halfDistanceBetweenTangentPoints;
return result;
};
var expandScratch = new Cartesian3();
/**
* Computes a bounding sphere by enlarging the provided sphere to contain the provided point.
*
* @param {BoundingSphere} sphere A sphere to expand.
* @param {Cartesian3} point A point to enclose in a bounding sphere.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*/
BoundingSphere.expand = function(sphere, point, result) {
if (!defined(sphere)) {
throw new DeveloperError('sphere is required.');
}
if (!defined(point)) {
throw new DeveloperError('point is required.');
}
result = BoundingSphere.clone(sphere, result);
var radius = Cartesian3.magnitude(Cartesian3.subtract(point, result.center, expandScratch));
if (radius > result.radius) {
result.radius = radius;
}
return result;
};
/**
* Determines which side of a plane a sphere is located.
*
* @param {BoundingSphere} sphere The bounding sphere to test.
* @param {Plane} plane The plane to test against.
* @returns {Intersect} {@link Intersect.INSIDE} if the entire sphere is on the side of the plane
* the normal is pointing, {@link Intersect.OUTSIDE} if the entire sphere is
* on the opposite side, and {@link Intersect.INTERSECTING} if the sphere
* intersects the plane.
*/
BoundingSphere.intersectPlane = function(sphere, plane) {
if (!defined(sphere)) {
throw new DeveloperError('sphere is required.');
}
if (!defined(plane)) {
throw new DeveloperError('plane is required.');
}
var center = sphere.center;
var radius = sphere.radius;
var normal = plane.normal;
var distanceToPlane = Cartesian3.dot(normal, center) + plane.distance;
if (distanceToPlane < -radius) {
// The center point is negative side of the plane normal
return Intersect.OUTSIDE;
} else if (distanceToPlane < radius) {
// The center point is positive side of the plane, but radius extends beyond it; partial overlap
return Intersect.INTERSECTING;
}
return Intersect.INSIDE;
};
/**
* Applies a 4x4 affine transformation matrix to a bounding sphere.
*
* @param {BoundingSphere} sphere The bounding sphere to apply the transformation to.
* @param {Matrix4} transform The transformation matrix to apply to the bounding sphere.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*/
BoundingSphere.transform = function(sphere, transform, result) {
if (!defined(sphere)) {
throw new DeveloperError('sphere is required.');
}
if (!defined(transform)) {
throw new DeveloperError('transform is required.');
}
if (!defined(result)) {
result = new BoundingSphere();
}
result.center = Matrix4.multiplyByPoint(transform, sphere.center, result.center);
result.radius = Matrix4.getMaximumScale(transform) * sphere.radius;
return result;
};
var distanceSquaredToScratch = new Cartesian3();
/**
* Computes the estimated distance squared from the closest point on a bounding sphere to a point.
*
* @param {BoundingSphere} sphere The sphere.
* @param {Cartesian3} cartesian The point
* @returns {Number} The estimated distance squared from the bounding sphere to the point.
*
* @example
* // Sort bounding spheres from back to front
* spheres.sort(function(a, b) {
* return Cesium.BoundingSphere.distanceSquaredTo(b, camera.positionWC) - Cesium.BoundingSphere.distanceSquaredTo(a, camera.positionWC);
* });
*/
BoundingSphere.distanceSquaredTo = function(sphere, cartesian) {
if (!defined(sphere)) {
throw new DeveloperError('sphere is required.');
}
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required.');
}
var diff = Cartesian3.subtract(sphere.center, cartesian, distanceSquaredToScratch);
return Cartesian3.magnitudeSquared(diff) - sphere.radius * sphere.radius;
};
/**
* Applies a 4x4 affine transformation matrix to a bounding sphere where there is no scale
* The transformation matrix is not verified to have a uniform scale of 1.
* This method is faster than computing the general bounding sphere transform using {@link BoundingSphere.transform}.
*
* @param {BoundingSphere} sphere The bounding sphere to apply the transformation to.
* @param {Matrix4} transform The transformation matrix to apply to the bounding sphere.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*
* @example
* var modelMatrix = Cesium.Transforms.eastNorthUpToFixedFrame(positionOnEllipsoid);
* var boundingSphere = new Cesium.BoundingSphere();
* var newBoundingSphere = Cesium.BoundingSphere.transformWithoutScale(boundingSphere, modelMatrix);
*/
BoundingSphere.transformWithoutScale = function(sphere, transform, result) {
if (!defined(sphere)) {
throw new DeveloperError('sphere is required.');
}
if (!defined(transform)) {
throw new DeveloperError('transform is required.');
}
if (!defined(result)) {
result = new BoundingSphere();
}
result.center = Matrix4.multiplyByPoint(transform, sphere.center, result.center);
result.radius = sphere.radius;
return result;
};
var scratchCartesian3 = new Cartesian3();
/**
* The distances calculated by the vector from the center of the bounding sphere to position projected onto direction
* plus/minus the radius of the bounding sphere.
*
* If you imagine the infinite number of planes with normal direction, this computes the smallest distance to the
* closest and farthest planes from position that intersect the bounding sphere.
*
* @param {BoundingSphere} sphere The bounding sphere to calculate the distance to.
* @param {Cartesian3} position The position to calculate the distance from.
* @param {Cartesian3} direction The direction from position.
* @param {Interval} [result] A Interval to store the nearest and farthest distances.
* @returns {Interval} The nearest and farthest distances on the bounding sphere from position in direction.
*/
BoundingSphere.computePlaneDistances = function(sphere, position, direction, result) {
if (!defined(sphere)) {
throw new DeveloperError('sphere is required.');
}
if (!defined(position)) {
throw new DeveloperError('position is required.');
}
if (!defined(direction)) {
throw new DeveloperError('direction is required.');
}
if (!defined(result)) {
result = new Interval();
}
var toCenter = Cartesian3.subtract(sphere.center, position, scratchCartesian3);
var mag = Cartesian3.dot(direction, toCenter);
result.start = mag - sphere.radius;
result.stop = mag + sphere.radius;
return result;
};
var projectTo2DNormalScratch = new Cartesian3();
var projectTo2DEastScratch = new Cartesian3();
var projectTo2DNorthScratch = new Cartesian3();
var projectTo2DWestScratch = new Cartesian3();
var projectTo2DSouthScratch = new Cartesian3();
var projectTo2DCartographicScratch = new Cartographic();
var projectTo2DPositionsScratch = new Array(8);
for (var n = 0; n < 8; ++n) {
projectTo2DPositionsScratch[n] = new Cartesian3();
}
var projectTo2DProjection = new GeographicProjection();
/**
* Creates a bounding sphere in 2D from a bounding sphere in 3D world coordinates.
*
* @param {BoundingSphere} sphere The bounding sphere to transform to 2D.
* @param {Object} [projection=GeographicProjection] The projection to 2D.
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*/
BoundingSphere.projectTo2D = function(sphere, projection, result) {
if (!defined(sphere)) {
throw new DeveloperError('sphere is required.');
}
projection = defaultValue(projection, projectTo2DProjection);
var ellipsoid = projection.ellipsoid;
var center = sphere.center;
var radius = sphere.radius;
var normal = ellipsoid.geodeticSurfaceNormal(center, projectTo2DNormalScratch);
var east = Cartesian3.cross(Cartesian3.UNIT_Z, normal, projectTo2DEastScratch);
Cartesian3.normalize(east, east);
var north = Cartesian3.cross(normal, east, projectTo2DNorthScratch);
Cartesian3.normalize(north, north);
Cartesian3.multiplyByScalar(normal, radius, normal);
Cartesian3.multiplyByScalar(north, radius, north);
Cartesian3.multiplyByScalar(east, radius, east);
var south = Cartesian3.negate(north, projectTo2DSouthScratch);
var west = Cartesian3.negate(east, projectTo2DWestScratch);
var positions = projectTo2DPositionsScratch;
// top NE corner
var corner = positions[0];
Cartesian3.add(normal, north, corner);
Cartesian3.add(corner, east, corner);
// top NW corner
corner = positions[1];
Cartesian3.add(normal, north, corner);
Cartesian3.add(corner, west, corner);
// top SW corner
corner = positions[2];
Cartesian3.add(normal, south, corner);
Cartesian3.add(corner, west, corner);
// top SE corner
corner = positions[3];
Cartesian3.add(normal, south, corner);
Cartesian3.add(corner, east, corner);
Cartesian3.negate(normal, normal);
// bottom NE corner
corner = positions[4];
Cartesian3.add(normal, north, corner);
Cartesian3.add(corner, east, corner);
// bottom NW corner
corner = positions[5];
Cartesian3.add(normal, north, corner);
Cartesian3.add(corner, west, corner);
// bottom SW corner
corner = positions[6];
Cartesian3.add(normal, south, corner);
Cartesian3.add(corner, west, corner);
// bottom SE corner
corner = positions[7];
Cartesian3.add(normal, south, corner);
Cartesian3.add(corner, east, corner);
var length = positions.length;
for (var i = 0; i < length; ++i) {
var position = positions[i];
Cartesian3.add(center, position, position);
var cartographic = ellipsoid.cartesianToCartographic(position, projectTo2DCartographicScratch);
projection.project(cartographic, position);
}
result = BoundingSphere.fromPoints(positions, result);
// swizzle center components
center = result.center;
var x = center.x;
var y = center.y;
var z = center.z;
center.x = z;
center.y = x;
center.z = y;
return result;
};
/**
* Determines whether or not a sphere is hidden from view by the occluder.
*
* @param {BoundingSphere} sphere The bounding sphere surrounding the occludee object.
* @param {Occluder} occluder The occluder.
* @returns {Boolean} true if the sphere is not visible; otherwise false.
*/
BoundingSphere.isOccluded = function(sphere, occluder) {
if (!defined(sphere)) {
throw new DeveloperError('sphere is required.');
}
if (!defined(occluder)) {
throw new DeveloperError('occluder is required.');
}
return !occluder.isBoundingSphereVisible(sphere);
};
/**
* Compares the provided BoundingSphere componentwise and returns
* true if they are equal, false otherwise.
*
* @param {BoundingSphere} [left] The first BoundingSphere.
* @param {BoundingSphere} [right] The second BoundingSphere.
* @returns {Boolean} true if left and right are equal, false otherwise.
*/
BoundingSphere.equals = function(left, right) {
return (left === right) ||
((defined(left)) &&
(defined(right)) &&
Cartesian3.equals(left.center, right.center) &&
left.radius === right.radius);
};
/**
* Determines which side of a plane the sphere is located.
*
* @param {Plane} plane The plane to test against.
* @returns {Intersect} {@link Intersect.INSIDE} if the entire sphere is on the side of the plane
* the normal is pointing, {@link Intersect.OUTSIDE} if the entire sphere is
* on the opposite side, and {@link Intersect.INTERSECTING} if the sphere
* intersects the plane.
*/
BoundingSphere.prototype.intersectPlane = function(plane) {
return BoundingSphere.intersectPlane(this, plane);
};
/**
* Computes the estimated distance squared from the closest point on a bounding sphere to a point.
*
* @param {Cartesian3} cartesian The point
* @returns {Number} The estimated distance squared from the bounding sphere to the point.
*
* @example
* // Sort bounding spheres from back to front
* spheres.sort(function(a, b) {
* return b.distanceSquaredTo(camera.positionWC) - a.distanceSquaredTo(camera.positionWC);
* });
*/
BoundingSphere.prototype.distanceSquaredTo = function(cartesian) {
return BoundingSphere.distanceSquaredTo(this, cartesian);
};
/**
* The distances calculated by the vector from the center of the bounding sphere to position projected onto direction
* plus/minus the radius of the bounding sphere.
*
* If you imagine the infinite number of planes with normal direction, this computes the smallest distance to the
* closest and farthest planes from position that intersect the bounding sphere.
*
* @param {Cartesian3} position The position to calculate the distance from.
* @param {Cartesian3} direction The direction from position.
* @param {Interval} [result] A Interval to store the nearest and farthest distances.
* @returns {Interval} The nearest and farthest distances on the bounding sphere from position in direction.
*/
BoundingSphere.prototype.computePlaneDistances = function(position, direction, result) {
return BoundingSphere.computePlaneDistances(this, position, direction, result);
};
/**
* Determines whether or not a sphere is hidden from view by the occluder.
*
* @param {Occluder} occluder The occluder.
* @returns {Boolean} true if the sphere is not visible; otherwise false.
*/
BoundingSphere.prototype.isOccluded = function(occluder) {
return BoundingSphere.isOccluded(this, occluder);
};
/**
* Compares this BoundingSphere against the provided BoundingSphere componentwise and returns
* true if they are equal, false otherwise.
*
* @param {BoundingSphere} [right] The right hand side BoundingSphere.
* @returns {Boolean} true if they are equal, false otherwise.
*/
BoundingSphere.prototype.equals = function(right) {
return BoundingSphere.equals(this, right);
};
/**
* Duplicates this BoundingSphere instance.
*
* @param {BoundingSphere} [result] The object onto which to store the result.
* @returns {BoundingSphere} The modified result parameter or a new BoundingSphere instance if none was provided.
*/
BoundingSphere.prototype.clone = function(result) {
return BoundingSphere.clone(this, result);
};
return BoundingSphere;
});
/*global define*/
define('Core/Fullscreen',[
'./defined',
'./defineProperties'
], function(
defined,
defineProperties) {
'use strict';
var _supportsFullscreen;
var _names = {
requestFullscreen : undefined,
exitFullscreen : undefined,
fullscreenEnabled : undefined,
fullscreenElement : undefined,
fullscreenchange : undefined,
fullscreenerror : undefined
};
/**
* Browser-independent functions for working with the standard fullscreen API.
*
* @exports Fullscreen
*
* @see {@link http://dvcs.w3.org/hg/fullscreen/raw-file/tip/Overview.html|W3C Fullscreen Living Specification}
*/
var Fullscreen = {};
defineProperties(Fullscreen, {
/**
* The element that is currently fullscreen, if any. To simply check if the
* browser is in fullscreen mode or not, use {@link Fullscreen#fullscreen}.
* @memberof Fullscreen
* @type {Object}
* @readonly
*/
element : {
get : function() {
if (!Fullscreen.supportsFullscreen()) {
return undefined;
}
return document[_names.fullscreenElement];
}
},
/**
* The name of the event on the document that is fired when fullscreen is
* entered or exited. This event name is intended for use with addEventListener.
* In your event handler, to determine if the browser is in fullscreen mode or not,
* use {@link Fullscreen#fullscreen}.
* @memberof Fullscreen
* @type {String}
* @readonly
*/
changeEventName : {
get : function() {
if (!Fullscreen.supportsFullscreen()) {
return undefined;
}
return _names.fullscreenchange;
}
},
/**
* The name of the event that is fired when a fullscreen error
* occurs. This event name is intended for use with addEventListener.
* @memberof Fullscreen
* @type {String}
* @readonly
*/
errorEventName : {
get : function() {
if (!Fullscreen.supportsFullscreen()) {
return undefined;
}
return _names.fullscreenerror;
}
},
/**
* Determine whether the browser will allow an element to be made fullscreen, or not.
* For example, by default, iframes cannot go fullscreen unless the containing page
* adds an "allowfullscreen" attribute (or prefixed equivalent).
* @memberof Fullscreen
* @type {Boolean}
* @readonly
*/
enabled : {
get : function() {
if (!Fullscreen.supportsFullscreen()) {
return undefined;
}
return document[_names.fullscreenEnabled];
}
},
/**
* Determines if the browser is currently in fullscreen mode.
* @memberof Fullscreen
* @type {Boolean}
* @readonly
*/
fullscreen : {
get : function() {
if (!Fullscreen.supportsFullscreen()) {
return undefined;
}
return Fullscreen.element !== null;
}
}
});
/**
* Detects whether the browser supports the standard fullscreen API.
*
* @returns {Boolean} true if the browser supports the standard fullscreen API,
* false otherwise.
*/
Fullscreen.supportsFullscreen = function() {
if (defined(_supportsFullscreen)) {
return _supportsFullscreen;
}
_supportsFullscreen = false;
var body = document.body;
if (typeof body.requestFullscreen === 'function') {
// go with the unprefixed, standard set of names
_names.requestFullscreen = 'requestFullscreen';
_names.exitFullscreen = 'exitFullscreen';
_names.fullscreenEnabled = 'fullscreenEnabled';
_names.fullscreenElement = 'fullscreenElement';
_names.fullscreenchange = 'fullscreenchange';
_names.fullscreenerror = 'fullscreenerror';
_supportsFullscreen = true;
return _supportsFullscreen;
}
//check for the correct combination of prefix plus the various names that browsers use
var prefixes = ['webkit', 'moz', 'o', 'ms', 'khtml'];
var name;
for (var i = 0, len = prefixes.length; i < len; ++i) {
var prefix = prefixes[i];
// casing of Fullscreen differs across browsers
name = prefix + 'RequestFullscreen';
if (typeof body[name] === 'function') {
_names.requestFullscreen = name;
_supportsFullscreen = true;
} else {
name = prefix + 'RequestFullScreen';
if (typeof body[name] === 'function') {
_names.requestFullscreen = name;
_supportsFullscreen = true;
}
}
// disagreement about whether it's "exit" as per spec, or "cancel"
name = prefix + 'ExitFullscreen';
if (typeof document[name] === 'function') {
_names.exitFullscreen = name;
} else {
name = prefix + 'CancelFullScreen';
if (typeof document[name] === 'function') {
_names.exitFullscreen = name;
}
}
// casing of Fullscreen differs across browsers
name = prefix + 'FullscreenEnabled';
if (document[name] !== undefined) {
_names.fullscreenEnabled = name;
} else {
name = prefix + 'FullScreenEnabled';
if (document[name] !== undefined) {
_names.fullscreenEnabled = name;
}
}
// casing of Fullscreen differs across browsers
name = prefix + 'FullscreenElement';
if (document[name] !== undefined) {
_names.fullscreenElement = name;
} else {
name = prefix + 'FullScreenElement';
if (document[name] !== undefined) {
_names.fullscreenElement = name;
}
}
// thankfully, event names are all lowercase per spec
name = prefix + 'fullscreenchange';
// event names do not have 'on' in the front, but the property on the document does
if (document['on' + name] !== undefined) {
//except on IE
if (prefix === 'ms') {
name = 'MSFullscreenChange';
}
_names.fullscreenchange = name;
}
name = prefix + 'fullscreenerror';
if (document['on' + name] !== undefined) {
//except on IE
if (prefix === 'ms') {
name = 'MSFullscreenError';
}
_names.fullscreenerror = name;
}
}
return _supportsFullscreen;
};
/**
* Asynchronously requests the browser to enter fullscreen mode on the given element.
* If fullscreen mode is not supported by the browser, does nothing.
*
* @param {Object} element The HTML element which will be placed into fullscreen mode.
* @param {HMDVRDevice} [vrDevice] The VR device.
*
* @example
* // Put the entire page into fullscreen.
* Cesium.Fullscreen.requestFullscreen(document.body)
*
* // Place only the Cesium canvas into fullscreen.
* Cesium.Fullscreen.requestFullscreen(scene.canvas)
*/
Fullscreen.requestFullscreen = function(element, vrDevice) {
if (!Fullscreen.supportsFullscreen()) {
return;
}
element[_names.requestFullscreen]({ vrDisplay: vrDevice });
};
/**
* Asynchronously exits fullscreen mode. If the browser is not currently
* in fullscreen, or if fullscreen mode is not supported by the browser, does nothing.
*/
Fullscreen.exitFullscreen = function() {
if (!Fullscreen.supportsFullscreen()) {
return;
}
document[_names.exitFullscreen]();
};
return Fullscreen;
});
/*global define*/
define('Core/FeatureDetection',[
'./defaultValue',
'./defined',
'./Fullscreen'
], function(
defaultValue,
defined,
Fullscreen) {
'use strict';
var theNavigator;
if (typeof navigator !== 'undefined') {
theNavigator = navigator;
} else {
theNavigator = {};
}
function extractVersion(versionString) {
var parts = versionString.split('.');
for (var i = 0, len = parts.length; i < len; ++i) {
parts[i] = parseInt(parts[i], 10);
}
return parts;
}
var isChromeResult;
var chromeVersionResult;
function isChrome() {
if (!defined(isChromeResult)) {
isChromeResult = false;
// Edge contains Chrome in the user agent too
if (!isEdge()) {
var fields = (/ Chrome\/([\.0-9]+)/).exec(theNavigator.userAgent);
if (fields !== null) {
isChromeResult = true;
chromeVersionResult = extractVersion(fields[1]);
}
}
}
return isChromeResult;
}
function chromeVersion() {
return isChrome() && chromeVersionResult;
}
var isSafariResult;
var safariVersionResult;
function isSafari() {
if (!defined(isSafariResult)) {
isSafariResult = false;
// Chrome and Edge contain Safari in the user agent too
if (!isChrome() && !isEdge() && (/ Safari\/[\.0-9]+/).test(theNavigator.userAgent)) {
var fields = (/ Version\/([\.0-9]+)/).exec(theNavigator.userAgent);
if (fields !== null) {
isSafariResult = true;
safariVersionResult = extractVersion(fields[1]);
}
}
}
return isSafariResult;
}
function safariVersion() {
return isSafari() && safariVersionResult;
}
var isWebkitResult;
var webkitVersionResult;
function isWebkit() {
if (!defined(isWebkitResult)) {
isWebkitResult = false;
var fields = (/ AppleWebKit\/([\.0-9]+)(\+?)/).exec(theNavigator.userAgent);
if (fields !== null) {
isWebkitResult = true;
webkitVersionResult = extractVersion(fields[1]);
webkitVersionResult.isNightly = !!fields[2];
}
}
return isWebkitResult;
}
function webkitVersion() {
return isWebkit() && webkitVersionResult;
}
var isInternetExplorerResult;
var internetExplorerVersionResult;
function isInternetExplorer() {
if (!defined(isInternetExplorerResult)) {
isInternetExplorerResult = false;
var fields;
if (theNavigator.appName === 'Microsoft Internet Explorer') {
fields = /MSIE ([0-9]{1,}[\.0-9]{0,})/.exec(theNavigator.userAgent);
if (fields !== null) {
isInternetExplorerResult = true;
internetExplorerVersionResult = extractVersion(fields[1]);
}
} else if (theNavigator.appName === 'Netscape') {
fields = /Trident\/.*rv:([0-9]{1,}[\.0-9]{0,})/.exec(theNavigator.userAgent);
if (fields !== null) {
isInternetExplorerResult = true;
internetExplorerVersionResult = extractVersion(fields[1]);
}
}
}
return isInternetExplorerResult;
}
function internetExplorerVersion() {
return isInternetExplorer() && internetExplorerVersionResult;
}
var isEdgeResult;
var edgeVersionResult;
function isEdge() {
if (!defined(isEdgeResult)) {
isEdgeResult = false;
var fields = (/ Edge\/([\.0-9]+)/).exec(theNavigator.userAgent);
if (fields !== null) {
isEdgeResult = true;
edgeVersionResult = extractVersion(fields[1]);
}
}
return isEdgeResult;
}
function edgeVersion() {
return isEdge() && edgeVersionResult;
}
var isFirefoxResult;
var firefoxVersionResult;
function isFirefox() {
if (!defined(isFirefoxResult)) {
isFirefoxResult = false;
var fields = /Firefox\/([\.0-9]+)/.exec(theNavigator.userAgent);
if (fields !== null) {
isFirefoxResult = true;
firefoxVersionResult = extractVersion(fields[1]);
}
}
return isFirefoxResult;
}
var isWindowsResult;
function isWindows() {
if (!defined(isWindowsResult)) {
isWindowsResult = /Windows/i.test(theNavigator.appVersion);
}
return isWindowsResult;
}
function firefoxVersion() {
return isFirefox() && firefoxVersionResult;
}
var hasPointerEvents;
function supportsPointerEvents() {
if (!defined(hasPointerEvents)) {
//While navigator.pointerEnabled is deprecated in the W3C specification
//we still need to use it if it exists in order to support browsers
//that rely on it, such as the Windows WebBrowser control which defines
//PointerEvent but sets navigator.pointerEnabled to false.
hasPointerEvents = typeof PointerEvent !== 'undefined' && (!defined(theNavigator.pointerEnabled) || theNavigator.pointerEnabled);
}
return hasPointerEvents;
}
var imageRenderingValueResult;
var supportsImageRenderingPixelatedResult;
function supportsImageRenderingPixelated() {
if (!defined(supportsImageRenderingPixelatedResult)) {
var canvas = document.createElement('canvas');
canvas.setAttribute('style',
'image-rendering: -moz-crisp-edges;' +
'image-rendering: pixelated;');
//canvas.style.imageRendering will be undefined, null or an empty string on unsupported browsers.
var tmp = canvas.style.imageRendering;
supportsImageRenderingPixelatedResult = defined(tmp) && tmp !== '';
if (supportsImageRenderingPixelatedResult) {
imageRenderingValueResult = tmp;
}
}
return supportsImageRenderingPixelatedResult;
}
function imageRenderingValue() {
return supportsImageRenderingPixelated() ? imageRenderingValueResult : undefined;
}
/**
* A set of functions to detect whether the current browser supports
* various features.
*
* @exports FeatureDetection
*/
var FeatureDetection = {
isChrome : isChrome,
chromeVersion : chromeVersion,
isSafari : isSafari,
safariVersion : safariVersion,
isWebkit : isWebkit,
webkitVersion : webkitVersion,
isInternetExplorer : isInternetExplorer,
internetExplorerVersion : internetExplorerVersion,
isEdge : isEdge,
edgeVersion : edgeVersion,
isFirefox : isFirefox,
firefoxVersion : firefoxVersion,
isWindows : isWindows,
hardwareConcurrency : defaultValue(theNavigator.hardwareConcurrency, 3),
supportsPointerEvents : supportsPointerEvents,
supportsImageRenderingPixelated: supportsImageRenderingPixelated,
imageRenderingValue: imageRenderingValue
};
/**
* Detects whether the current browser supports the full screen standard.
*
* @returns {Boolean} true if the browser supports the full screen standard, false if not.
*
* @see Fullscreen
* @see {@link http://dvcs.w3.org/hg/fullscreen/raw-file/tip/Overview.html|W3C Fullscreen Living Specification}
*/
FeatureDetection.supportsFullscreen = function() {
return Fullscreen.supportsFullscreen();
};
/**
* Detects whether the current browser supports typed arrays.
*
* @returns {Boolean} true if the browser supports typed arrays, false if not.
*
* @see {@link http://www.khronos.org/registry/typedarray/specs/latest/|Typed Array Specification}
*/
FeatureDetection.supportsTypedArrays = function() {
return typeof ArrayBuffer !== 'undefined';
};
/**
* Detects whether the current browser supports Web Workers.
*
* @returns {Boolean} true if the browsers supports Web Workers, false if not.
*
* @see {@link http://www.w3.org/TR/workers/}
*/
FeatureDetection.supportsWebWorkers = function() {
return typeof Worker !== 'undefined';
};
return FeatureDetection;
});
/*global define*/
define('Core/WebGLConstants',[
'./freezeObject'
], function(
freezeObject) {
'use strict';
/**
* Enum containing WebGL Constant values by name.
* for use without an active WebGL context, or in cases where certain constants are unavailable using the WebGL context
* (For example, in [Safari 9]{@link https://github.com/AnalyticalGraphicsInc/cesium/issues/2989}).
*
* These match the constants from the [WebGL 1.0]{@link https://www.khronos.org/registry/webgl/specs/latest/1.0/}
* and [WebGL 2.0]{@link https://www.khronos.org/registry/webgl/specs/latest/2.0/}
* specifications.
*
* @exports WebGLConstants
*/
var WebGLConstants = {
DEPTH_BUFFER_BIT : 0x00000100,
STENCIL_BUFFER_BIT : 0x00000400,
COLOR_BUFFER_BIT : 0x00004000,
POINTS : 0x0000,
LINES : 0x0001,
LINE_LOOP : 0x0002,
LINE_STRIP : 0x0003,
TRIANGLES : 0x0004,
TRIANGLE_STRIP : 0x0005,
TRIANGLE_FAN : 0x0006,
ZERO : 0,
ONE : 1,
SRC_COLOR : 0x0300,
ONE_MINUS_SRC_COLOR : 0x0301,
SRC_ALPHA : 0x0302,
ONE_MINUS_SRC_ALPHA : 0x0303,
DST_ALPHA : 0x0304,
ONE_MINUS_DST_ALPHA : 0x0305,
DST_COLOR : 0x0306,
ONE_MINUS_DST_COLOR : 0x0307,
SRC_ALPHA_SATURATE : 0x0308,
FUNC_ADD : 0x8006,
BLEND_EQUATION : 0x8009,
BLEND_EQUATION_RGB : 0x8009, // same as BLEND_EQUATION
BLEND_EQUATION_ALPHA : 0x883D,
FUNC_SUBTRACT : 0x800A,
FUNC_REVERSE_SUBTRACT : 0x800B,
BLEND_DST_RGB : 0x80C8,
BLEND_SRC_RGB : 0x80C9,
BLEND_DST_ALPHA : 0x80CA,
BLEND_SRC_ALPHA : 0x80CB,
CONSTANT_COLOR : 0x8001,
ONE_MINUS_CONSTANT_COLOR : 0x8002,
CONSTANT_ALPHA : 0x8003,
ONE_MINUS_CONSTANT_ALPHA : 0x8004,
BLEND_COLOR : 0x8005,
ARRAY_BUFFER : 0x8892,
ELEMENT_ARRAY_BUFFER : 0x8893,
ARRAY_BUFFER_BINDING : 0x8894,
ELEMENT_ARRAY_BUFFER_BINDING : 0x8895,
STREAM_DRAW : 0x88E0,
STATIC_DRAW : 0x88E4,
DYNAMIC_DRAW : 0x88E8,
BUFFER_SIZE : 0x8764,
BUFFER_USAGE : 0x8765,
CURRENT_VERTEX_ATTRIB : 0x8626,
FRONT : 0x0404,
BACK : 0x0405,
FRONT_AND_BACK : 0x0408,
CULL_FACE : 0x0B44,
BLEND : 0x0BE2,
DITHER : 0x0BD0,
STENCIL_TEST : 0x0B90,
DEPTH_TEST : 0x0B71,
SCISSOR_TEST : 0x0C11,
POLYGON_OFFSET_FILL : 0x8037,
SAMPLE_ALPHA_TO_COVERAGE : 0x809E,
SAMPLE_COVERAGE : 0x80A0,
NO_ERROR : 0,
INVALID_ENUM : 0x0500,
INVALID_VALUE : 0x0501,
INVALID_OPERATION : 0x0502,
OUT_OF_MEMORY : 0x0505,
CW : 0x0900,
CCW : 0x0901,
LINE_WIDTH : 0x0B21,
ALIASED_POINT_SIZE_RANGE : 0x846D,
ALIASED_LINE_WIDTH_RANGE : 0x846E,
CULL_FACE_MODE : 0x0B45,
FRONT_FACE : 0x0B46,
DEPTH_RANGE : 0x0B70,
DEPTH_WRITEMASK : 0x0B72,
DEPTH_CLEAR_VALUE : 0x0B73,
DEPTH_FUNC : 0x0B74,
STENCIL_CLEAR_VALUE : 0x0B91,
STENCIL_FUNC : 0x0B92,
STENCIL_FAIL : 0x0B94,
STENCIL_PASS_DEPTH_FAIL : 0x0B95,
STENCIL_PASS_DEPTH_PASS : 0x0B96,
STENCIL_REF : 0x0B97,
STENCIL_VALUE_MASK : 0x0B93,
STENCIL_WRITEMASK : 0x0B98,
STENCIL_BACK_FUNC : 0x8800,
STENCIL_BACK_FAIL : 0x8801,
STENCIL_BACK_PASS_DEPTH_FAIL : 0x8802,
STENCIL_BACK_PASS_DEPTH_PASS : 0x8803,
STENCIL_BACK_REF : 0x8CA3,
STENCIL_BACK_VALUE_MASK : 0x8CA4,
STENCIL_BACK_WRITEMASK : 0x8CA5,
VIEWPORT : 0x0BA2,
SCISSOR_BOX : 0x0C10,
COLOR_CLEAR_VALUE : 0x0C22,
COLOR_WRITEMASK : 0x0C23,
UNPACK_ALIGNMENT : 0x0CF5,
PACK_ALIGNMENT : 0x0D05,
MAX_TEXTURE_SIZE : 0x0D33,
MAX_VIEWPORT_DIMS : 0x0D3A,
SUBPIXEL_BITS : 0x0D50,
RED_BITS : 0x0D52,
GREEN_BITS : 0x0D53,
BLUE_BITS : 0x0D54,
ALPHA_BITS : 0x0D55,
DEPTH_BITS : 0x0D56,
STENCIL_BITS : 0x0D57,
POLYGON_OFFSET_UNITS : 0x2A00,
POLYGON_OFFSET_FACTOR : 0x8038,
TEXTURE_BINDING_2D : 0x8069,
SAMPLE_BUFFERS : 0x80A8,
SAMPLES : 0x80A9,
SAMPLE_COVERAGE_VALUE : 0x80AA,
SAMPLE_COVERAGE_INVERT : 0x80AB,
COMPRESSED_TEXTURE_FORMATS : 0x86A3,
DONT_CARE : 0x1100,
FASTEST : 0x1101,
NICEST : 0x1102,
GENERATE_MIPMAP_HINT : 0x8192,
BYTE : 0x1400,
UNSIGNED_BYTE : 0x1401,
SHORT : 0x1402,
UNSIGNED_SHORT : 0x1403,
INT : 0x1404,
UNSIGNED_INT : 0x1405,
FLOAT : 0x1406,
DEPTH_COMPONENT : 0x1902,
ALPHA : 0x1906,
RGB : 0x1907,
RGBA : 0x1908,
LUMINANCE : 0x1909,
LUMINANCE_ALPHA : 0x190A,
UNSIGNED_SHORT_4_4_4_4 : 0x8033,
UNSIGNED_SHORT_5_5_5_1 : 0x8034,
UNSIGNED_SHORT_5_6_5 : 0x8363,
FRAGMENT_SHADER : 0x8B30,
VERTEX_SHADER : 0x8B31,
MAX_VERTEX_ATTRIBS : 0x8869,
MAX_VERTEX_UNIFORM_VECTORS : 0x8DFB,
MAX_VARYING_VECTORS : 0x8DFC,
MAX_COMBINED_TEXTURE_IMAGE_UNITS : 0x8B4D,
MAX_VERTEX_TEXTURE_IMAGE_UNITS : 0x8B4C,
MAX_TEXTURE_IMAGE_UNITS : 0x8872,
MAX_FRAGMENT_UNIFORM_VECTORS : 0x8DFD,
SHADER_TYPE : 0x8B4F,
DELETE_STATUS : 0x8B80,
LINK_STATUS : 0x8B82,
VALIDATE_STATUS : 0x8B83,
ATTACHED_SHADERS : 0x8B85,
ACTIVE_UNIFORMS : 0x8B86,
ACTIVE_ATTRIBUTES : 0x8B89,
SHADING_LANGUAGE_VERSION : 0x8B8C,
CURRENT_PROGRAM : 0x8B8D,
NEVER : 0x0200,
LESS : 0x0201,
EQUAL : 0x0202,
LEQUAL : 0x0203,
GREATER : 0x0204,
NOTEQUAL : 0x0205,
GEQUAL : 0x0206,
ALWAYS : 0x0207,
KEEP : 0x1E00,
REPLACE : 0x1E01,
INCR : 0x1E02,
DECR : 0x1E03,
INVERT : 0x150A,
INCR_WRAP : 0x8507,
DECR_WRAP : 0x8508,
VENDOR : 0x1F00,
RENDERER : 0x1F01,
VERSION : 0x1F02,
NEAREST : 0x2600,
LINEAR : 0x2601,
NEAREST_MIPMAP_NEAREST : 0x2700,
LINEAR_MIPMAP_NEAREST : 0x2701,
NEAREST_MIPMAP_LINEAR : 0x2702,
LINEAR_MIPMAP_LINEAR : 0x2703,
TEXTURE_MAG_FILTER : 0x2800,
TEXTURE_MIN_FILTER : 0x2801,
TEXTURE_WRAP_S : 0x2802,
TEXTURE_WRAP_T : 0x2803,
TEXTURE_2D : 0x0DE1,
TEXTURE : 0x1702,
TEXTURE_CUBE_MAP : 0x8513,
TEXTURE_BINDING_CUBE_MAP : 0x8514,
TEXTURE_CUBE_MAP_POSITIVE_X : 0x8515,
TEXTURE_CUBE_MAP_NEGATIVE_X : 0x8516,
TEXTURE_CUBE_MAP_POSITIVE_Y : 0x8517,
TEXTURE_CUBE_MAP_NEGATIVE_Y : 0x8518,
TEXTURE_CUBE_MAP_POSITIVE_Z : 0x8519,
TEXTURE_CUBE_MAP_NEGATIVE_Z : 0x851A,
MAX_CUBE_MAP_TEXTURE_SIZE : 0x851C,
TEXTURE0 : 0x84C0,
TEXTURE1 : 0x84C1,
TEXTURE2 : 0x84C2,
TEXTURE3 : 0x84C3,
TEXTURE4 : 0x84C4,
TEXTURE5 : 0x84C5,
TEXTURE6 : 0x84C6,
TEXTURE7 : 0x84C7,
TEXTURE8 : 0x84C8,
TEXTURE9 : 0x84C9,
TEXTURE10 : 0x84CA,
TEXTURE11 : 0x84CB,
TEXTURE12 : 0x84CC,
TEXTURE13 : 0x84CD,
TEXTURE14 : 0x84CE,
TEXTURE15 : 0x84CF,
TEXTURE16 : 0x84D0,
TEXTURE17 : 0x84D1,
TEXTURE18 : 0x84D2,
TEXTURE19 : 0x84D3,
TEXTURE20 : 0x84D4,
TEXTURE21 : 0x84D5,
TEXTURE22 : 0x84D6,
TEXTURE23 : 0x84D7,
TEXTURE24 : 0x84D8,
TEXTURE25 : 0x84D9,
TEXTURE26 : 0x84DA,
TEXTURE27 : 0x84DB,
TEXTURE28 : 0x84DC,
TEXTURE29 : 0x84DD,
TEXTURE30 : 0x84DE,
TEXTURE31 : 0x84DF,
ACTIVE_TEXTURE : 0x84E0,
REPEAT : 0x2901,
CLAMP_TO_EDGE : 0x812F,
MIRRORED_REPEAT : 0x8370,
FLOAT_VEC2 : 0x8B50,
FLOAT_VEC3 : 0x8B51,
FLOAT_VEC4 : 0x8B52,
INT_VEC2 : 0x8B53,
INT_VEC3 : 0x8B54,
INT_VEC4 : 0x8B55,
BOOL : 0x8B56,
BOOL_VEC2 : 0x8B57,
BOOL_VEC3 : 0x8B58,
BOOL_VEC4 : 0x8B59,
FLOAT_MAT2 : 0x8B5A,
FLOAT_MAT3 : 0x8B5B,
FLOAT_MAT4 : 0x8B5C,
SAMPLER_2D : 0x8B5E,
SAMPLER_CUBE : 0x8B60,
VERTEX_ATTRIB_ARRAY_ENABLED : 0x8622,
VERTEX_ATTRIB_ARRAY_SIZE : 0x8623,
VERTEX_ATTRIB_ARRAY_STRIDE : 0x8624,
VERTEX_ATTRIB_ARRAY_TYPE : 0x8625,
VERTEX_ATTRIB_ARRAY_NORMALIZED : 0x886A,
VERTEX_ATTRIB_ARRAY_POINTER : 0x8645,
VERTEX_ATTRIB_ARRAY_BUFFER_BINDING : 0x889F,
IMPLEMENTATION_COLOR_READ_TYPE : 0x8B9A,
IMPLEMENTATION_COLOR_READ_FORMAT : 0x8B9B,
COMPILE_STATUS : 0x8B81,
LOW_FLOAT : 0x8DF0,
MEDIUM_FLOAT : 0x8DF1,
HIGH_FLOAT : 0x8DF2,
LOW_INT : 0x8DF3,
MEDIUM_INT : 0x8DF4,
HIGH_INT : 0x8DF5,
FRAMEBUFFER : 0x8D40,
RENDERBUFFER : 0x8D41,
RGBA4 : 0x8056,
RGB5_A1 : 0x8057,
RGB565 : 0x8D62,
DEPTH_COMPONENT16 : 0x81A5,
STENCIL_INDEX : 0x1901,
STENCIL_INDEX8 : 0x8D48,
DEPTH_STENCIL : 0x84F9,
RENDERBUFFER_WIDTH : 0x8D42,
RENDERBUFFER_HEIGHT : 0x8D43,
RENDERBUFFER_INTERNAL_FORMAT : 0x8D44,
RENDERBUFFER_RED_SIZE : 0x8D50,
RENDERBUFFER_GREEN_SIZE : 0x8D51,
RENDERBUFFER_BLUE_SIZE : 0x8D52,
RENDERBUFFER_ALPHA_SIZE : 0x8D53,
RENDERBUFFER_DEPTH_SIZE : 0x8D54,
RENDERBUFFER_STENCIL_SIZE : 0x8D55,
FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE : 0x8CD0,
FRAMEBUFFER_ATTACHMENT_OBJECT_NAME : 0x8CD1,
FRAMEBUFFER_ATTACHMENT_TEXTURE_LEVEL : 0x8CD2,
FRAMEBUFFER_ATTACHMENT_TEXTURE_CUBE_MAP_FACE : 0x8CD3,
COLOR_ATTACHMENT0 : 0x8CE0,
DEPTH_ATTACHMENT : 0x8D00,
STENCIL_ATTACHMENT : 0x8D20,
DEPTH_STENCIL_ATTACHMENT : 0x821A,
NONE : 0,
FRAMEBUFFER_COMPLETE : 0x8CD5,
FRAMEBUFFER_INCOMPLETE_ATTACHMENT : 0x8CD6,
FRAMEBUFFER_INCOMPLETE_MISSING_ATTACHMENT : 0x8CD7,
FRAMEBUFFER_INCOMPLETE_DIMENSIONS : 0x8CD9,
FRAMEBUFFER_UNSUPPORTED : 0x8CDD,
FRAMEBUFFER_BINDING : 0x8CA6,
RENDERBUFFER_BINDING : 0x8CA7,
MAX_RENDERBUFFER_SIZE : 0x84E8,
INVALID_FRAMEBUFFER_OPERATION : 0x0506,
UNPACK_FLIP_Y_WEBGL : 0x9240,
UNPACK_PREMULTIPLY_ALPHA_WEBGL : 0x9241,
CONTEXT_LOST_WEBGL : 0x9242,
UNPACK_COLORSPACE_CONVERSION_WEBGL : 0x9243,
BROWSER_DEFAULT_WEBGL : 0x9244,
// Desktop OpenGL
DOUBLE : 0x140A,
// WebGL 2
READ_BUFFER : 0x0C02,
UNPACK_ROW_LENGTH : 0x0CF2,
UNPACK_SKIP_ROWS : 0x0CF3,
UNPACK_SKIP_PIXELS : 0x0CF4,
PACK_ROW_LENGTH : 0x0D02,
PACK_SKIP_ROWS : 0x0D03,
PACK_SKIP_PIXELS : 0x0D04,
COLOR : 0x1800,
DEPTH : 0x1801,
STENCIL : 0x1802,
RED : 0x1903,
RGB8 : 0x8051,
RGBA8 : 0x8058,
RGB10_A2 : 0x8059,
TEXTURE_BINDING_3D : 0x806A,
UNPACK_SKIP_IMAGES : 0x806D,
UNPACK_IMAGE_HEIGHT : 0x806E,
TEXTURE_3D : 0x806F,
TEXTURE_WRAP_R : 0x8072,
MAX_3D_TEXTURE_SIZE : 0x8073,
UNSIGNED_INT_2_10_10_10_REV : 0x8368,
MAX_ELEMENTS_VERTICES : 0x80E8,
MAX_ELEMENTS_INDICES : 0x80E9,
TEXTURE_MIN_LOD : 0x813A,
TEXTURE_MAX_LOD : 0x813B,
TEXTURE_BASE_LEVEL : 0x813C,
TEXTURE_MAX_LEVEL : 0x813D,
MIN : 0x8007,
MAX : 0x8008,
DEPTH_COMPONENT24 : 0x81A6,
MAX_TEXTURE_LOD_BIAS : 0x84FD,
TEXTURE_COMPARE_MODE : 0x884C,
TEXTURE_COMPARE_FUNC : 0x884D,
CURRENT_QUERY : 0x8865,
QUERY_RESULT : 0x8866,
QUERY_RESULT_AVAILABLE : 0x8867,
STREAM_READ : 0x88E1,
STREAM_COPY : 0x88E2,
STATIC_READ : 0x88E5,
STATIC_COPY : 0x88E6,
DYNAMIC_READ : 0x88E9,
DYNAMIC_COPY : 0x88EA,
MAX_DRAW_BUFFERS : 0x8824,
DRAW_BUFFER0 : 0x8825,
DRAW_BUFFER1 : 0x8826,
DRAW_BUFFER2 : 0x8827,
DRAW_BUFFER3 : 0x8828,
DRAW_BUFFER4 : 0x8829,
DRAW_BUFFER5 : 0x882A,
DRAW_BUFFER6 : 0x882B,
DRAW_BUFFER7 : 0x882C,
DRAW_BUFFER8 : 0x882D,
DRAW_BUFFER9 : 0x882E,
DRAW_BUFFER10 : 0x882F,
DRAW_BUFFER11 : 0x8830,
DRAW_BUFFER12 : 0x8831,
DRAW_BUFFER13 : 0x8832,
DRAW_BUFFER14 : 0x8833,
DRAW_BUFFER15 : 0x8834,
MAX_FRAGMENT_UNIFORM_COMPONENTS : 0x8B49,
MAX_VERTEX_UNIFORM_COMPONENTS : 0x8B4A,
SAMPLER_3D : 0x8B5F,
SAMPLER_2D_SHADOW : 0x8B62,
FRAGMENT_SHADER_DERIVATIVE_HINT : 0x8B8B,
PIXEL_PACK_BUFFER : 0x88EB,
PIXEL_UNPACK_BUFFER : 0x88EC,
PIXEL_PACK_BUFFER_BINDING : 0x88ED,
PIXEL_UNPACK_BUFFER_BINDING : 0x88EF,
FLOAT_MAT2x3 : 0x8B65,
FLOAT_MAT2x4 : 0x8B66,
FLOAT_MAT3x2 : 0x8B67,
FLOAT_MAT3x4 : 0x8B68,
FLOAT_MAT4x2 : 0x8B69,
FLOAT_MAT4x3 : 0x8B6A,
SRGB : 0x8C40,
SRGB8 : 0x8C41,
SRGB8_ALPHA8 : 0x8C43,
COMPARE_REF_TO_TEXTURE : 0x884E,
RGBA32F : 0x8814,
RGB32F : 0x8815,
RGBA16F : 0x881A,
RGB16F : 0x881B,
VERTEX_ATTRIB_ARRAY_INTEGER : 0x88FD,
MAX_ARRAY_TEXTURE_LAYERS : 0x88FF,
MIN_PROGRAM_TEXEL_OFFSET : 0x8904,
MAX_PROGRAM_TEXEL_OFFSET : 0x8905,
MAX_VARYING_COMPONENTS : 0x8B4B,
TEXTURE_2D_ARRAY : 0x8C1A,
TEXTURE_BINDING_2D_ARRAY : 0x8C1D,
R11F_G11F_B10F : 0x8C3A,
UNSIGNED_INT_10F_11F_11F_REV : 0x8C3B,
RGB9_E5 : 0x8C3D,
UNSIGNED_INT_5_9_9_9_REV : 0x8C3E,
TRANSFORM_FEEDBACK_BUFFER_MODE : 0x8C7F,
MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS : 0x8C80,
TRANSFORM_FEEDBACK_VARYINGS : 0x8C83,
TRANSFORM_FEEDBACK_BUFFER_START : 0x8C84,
TRANSFORM_FEEDBACK_BUFFER_SIZE : 0x8C85,
TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN : 0x8C88,
RASTERIZER_DISCARD : 0x8C89,
MAX_TRANSFORM_FEEDBACK_INTERLEAVED_COMPONENTS : 0x8C8A,
MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS : 0x8C8B,
INTERLEAVED_ATTRIBS : 0x8C8C,
SEPARATE_ATTRIBS : 0x8C8D,
TRANSFORM_FEEDBACK_BUFFER : 0x8C8E,
TRANSFORM_FEEDBACK_BUFFER_BINDING : 0x8C8F,
RGBA32UI : 0x8D70,
RGB32UI : 0x8D71,
RGBA16UI : 0x8D76,
RGB16UI : 0x8D77,
RGBA8UI : 0x8D7C,
RGB8UI : 0x8D7D,
RGBA32I : 0x8D82,
RGB32I : 0x8D83,
RGBA16I : 0x8D88,
RGB16I : 0x8D89,
RGBA8I : 0x8D8E,
RGB8I : 0x8D8F,
RED_INTEGER : 0x8D94,
RGB_INTEGER : 0x8D98,
RGBA_INTEGER : 0x8D99,
SAMPLER_2D_ARRAY : 0x8DC1,
SAMPLER_2D_ARRAY_SHADOW : 0x8DC4,
SAMPLER_CUBE_SHADOW : 0x8DC5,
UNSIGNED_INT_VEC2 : 0x8DC6,
UNSIGNED_INT_VEC3 : 0x8DC7,
UNSIGNED_INT_VEC4 : 0x8DC8,
INT_SAMPLER_2D : 0x8DCA,
INT_SAMPLER_3D : 0x8DCB,
INT_SAMPLER_CUBE : 0x8DCC,
INT_SAMPLER_2D_ARRAY : 0x8DCF,
UNSIGNED_INT_SAMPLER_2D : 0x8DD2,
UNSIGNED_INT_SAMPLER_3D : 0x8DD3,
UNSIGNED_INT_SAMPLER_CUBE : 0x8DD4,
UNSIGNED_INT_SAMPLER_2D_ARRAY : 0x8DD7,
DEPTH_COMPONENT32F : 0x8CAC,
DEPTH32F_STENCIL8 : 0x8CAD,
FLOAT_32_UNSIGNED_INT_24_8_REV : 0x8DAD,
FRAMEBUFFER_ATTACHMENT_COLOR_ENCODING : 0x8210,
FRAMEBUFFER_ATTACHMENT_COMPONENT_TYPE : 0x8211,
FRAMEBUFFER_ATTACHMENT_RED_SIZE : 0x8212,
FRAMEBUFFER_ATTACHMENT_GREEN_SIZE : 0x8213,
FRAMEBUFFER_ATTACHMENT_BLUE_SIZE : 0x8214,
FRAMEBUFFER_ATTACHMENT_ALPHA_SIZE : 0x8215,
FRAMEBUFFER_ATTACHMENT_DEPTH_SIZE : 0x8216,
FRAMEBUFFER_ATTACHMENT_STENCIL_SIZE : 0x8217,
FRAMEBUFFER_DEFAULT : 0x8218,
UNSIGNED_INT_24_8 : 0x84FA,
DEPTH24_STENCIL8 : 0x88F0,
UNSIGNED_NORMALIZED : 0x8C17,
DRAW_FRAMEBUFFER_BINDING : 0x8CA6, // Same as FRAMEBUFFER_BINDING
READ_FRAMEBUFFER : 0x8CA8,
DRAW_FRAMEBUFFER : 0x8CA9,
READ_FRAMEBUFFER_BINDING : 0x8CAA,
RENDERBUFFER_SAMPLES : 0x8CAB,
FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER : 0x8CD4,
MAX_COLOR_ATTACHMENTS : 0x8CDF,
COLOR_ATTACHMENT1 : 0x8CE1,
COLOR_ATTACHMENT2 : 0x8CE2,
COLOR_ATTACHMENT3 : 0x8CE3,
COLOR_ATTACHMENT4 : 0x8CE4,
COLOR_ATTACHMENT5 : 0x8CE5,
COLOR_ATTACHMENT6 : 0x8CE6,
COLOR_ATTACHMENT7 : 0x8CE7,
COLOR_ATTACHMENT8 : 0x8CE8,
COLOR_ATTACHMENT9 : 0x8CE9,
COLOR_ATTACHMENT10 : 0x8CEA,
COLOR_ATTACHMENT11 : 0x8CEB,
COLOR_ATTACHMENT12 : 0x8CEC,
COLOR_ATTACHMENT13 : 0x8CED,
COLOR_ATTACHMENT14 : 0x8CEE,
COLOR_ATTACHMENT15 : 0x8CEF,
FRAMEBUFFER_INCOMPLETE_MULTISAMPLE : 0x8D56,
MAX_SAMPLES : 0x8D57,
HALF_FLOAT : 0x140B,
RG : 0x8227,
RG_INTEGER : 0x8228,
R8 : 0x8229,
RG8 : 0x822B,
R16F : 0x822D,
R32F : 0x822E,
RG16F : 0x822F,
RG32F : 0x8230,
R8I : 0x8231,
R8UI : 0x8232,
R16I : 0x8233,
R16UI : 0x8234,
R32I : 0x8235,
R32UI : 0x8236,
RG8I : 0x8237,
RG8UI : 0x8238,
RG16I : 0x8239,
RG16UI : 0x823A,
RG32I : 0x823B,
RG32UI : 0x823C,
VERTEX_ARRAY_BINDING : 0x85B5,
R8_SNORM : 0x8F94,
RG8_SNORM : 0x8F95,
RGB8_SNORM : 0x8F96,
RGBA8_SNORM : 0x8F97,
SIGNED_NORMALIZED : 0x8F9C,
COPY_READ_BUFFER : 0x8F36,
COPY_WRITE_BUFFER : 0x8F37,
COPY_READ_BUFFER_BINDING : 0x8F36, // Same as COPY_READ_BUFFER
COPY_WRITE_BUFFER_BINDING : 0x8F37, // Same as COPY_WRITE_BUFFER
UNIFORM_BUFFER : 0x8A11,
UNIFORM_BUFFER_BINDING : 0x8A28,
UNIFORM_BUFFER_START : 0x8A29,
UNIFORM_BUFFER_SIZE : 0x8A2A,
MAX_VERTEX_UNIFORM_BLOCKS : 0x8A2B,
MAX_FRAGMENT_UNIFORM_BLOCKS : 0x8A2D,
MAX_COMBINED_UNIFORM_BLOCKS : 0x8A2E,
MAX_UNIFORM_BUFFER_BINDINGS : 0x8A2F,
MAX_UNIFORM_BLOCK_SIZE : 0x8A30,
MAX_COMBINED_VERTEX_UNIFORM_COMPONENTS : 0x8A31,
MAX_COMBINED_FRAGMENT_UNIFORM_COMPONENTS : 0x8A33,
UNIFORM_BUFFER_OFFSET_ALIGNMENT : 0x8A34,
ACTIVE_UNIFORM_BLOCKS : 0x8A36,
UNIFORM_TYPE : 0x8A37,
UNIFORM_SIZE : 0x8A38,
UNIFORM_BLOCK_INDEX : 0x8A3A,
UNIFORM_OFFSET : 0x8A3B,
UNIFORM_ARRAY_STRIDE : 0x8A3C,
UNIFORM_MATRIX_STRIDE : 0x8A3D,
UNIFORM_IS_ROW_MAJOR : 0x8A3E,
UNIFORM_BLOCK_BINDING : 0x8A3F,
UNIFORM_BLOCK_DATA_SIZE : 0x8A40,
UNIFORM_BLOCK_ACTIVE_UNIFORMS : 0x8A42,
UNIFORM_BLOCK_ACTIVE_UNIFORM_INDICES : 0x8A43,
UNIFORM_BLOCK_REFERENCED_BY_VERTEX_SHADER : 0x8A44,
UNIFORM_BLOCK_REFERENCED_BY_FRAGMENT_SHADER : 0x8A46,
INVALID_INDEX : 0xFFFFFFFF,
MAX_VERTEX_OUTPUT_COMPONENTS : 0x9122,
MAX_FRAGMENT_INPUT_COMPONENTS : 0x9125,
MAX_SERVER_WAIT_TIMEOUT : 0x9111,
OBJECT_TYPE : 0x9112,
SYNC_CONDITION : 0x9113,
SYNC_STATUS : 0x9114,
SYNC_FLAGS : 0x9115,
SYNC_FENCE : 0x9116,
SYNC_GPU_COMMANDS_COMPLETE : 0x9117,
UNSIGNALED : 0x9118,
SIGNALED : 0x9119,
ALREADY_SIGNALED : 0x911A,
TIMEOUT_EXPIRED : 0x911B,
CONDITION_SATISFIED : 0x911C,
WAIT_FAILED : 0x911D,
SYNC_FLUSH_COMMANDS_BIT : 0x00000001,
VERTEX_ATTRIB_ARRAY_DIVISOR : 0x88FE,
ANY_SAMPLES_PASSED : 0x8C2F,
ANY_SAMPLES_PASSED_CONSERVATIVE : 0x8D6A,
SAMPLER_BINDING : 0x8919,
RGB10_A2UI : 0x906F,
INT_2_10_10_10_REV : 0x8D9F,
TRANSFORM_FEEDBACK : 0x8E22,
TRANSFORM_FEEDBACK_PAUSED : 0x8E23,
TRANSFORM_FEEDBACK_ACTIVE : 0x8E24,
TRANSFORM_FEEDBACK_BINDING : 0x8E25,
COMPRESSED_R11_EAC : 0x9270,
COMPRESSED_SIGNED_R11_EAC : 0x9271,
COMPRESSED_RG11_EAC : 0x9272,
COMPRESSED_SIGNED_RG11_EAC : 0x9273,
COMPRESSED_RGB8_ETC2 : 0x9274,
COMPRESSED_SRGB8_ETC2 : 0x9275,
COMPRESSED_RGB8_PUNCHTHROUGH_ALPHA1_ETC2 : 0x9276,
COMPRESSED_SRGB8_PUNCHTHROUGH_ALPHA1_ETC2 : 0x9277,
COMPRESSED_RGBA8_ETC2_EAC : 0x9278,
COMPRESSED_SRGB8_ALPHA8_ETC2_EAC : 0x9279,
TEXTURE_IMMUTABLE_FORMAT : 0x912F,
MAX_ELEMENT_INDEX : 0x8D6B,
TEXTURE_IMMUTABLE_LEVELS : 0x82DF
};
return freezeObject(WebGLConstants);
});
/*global define*/
define('Core/ComponentDatatype',[
'./defaultValue',
'./defined',
'./DeveloperError',
'./FeatureDetection',
'./freezeObject',
'./WebGLConstants'
], function(
defaultValue,
defined,
DeveloperError,
FeatureDetection,
freezeObject,
WebGLConstants) {
'use strict';
// Bail out if the browser doesn't support typed arrays, to prevent the setup function
// from failing, since we won't be able to create a WebGL context anyway.
if (!FeatureDetection.supportsTypedArrays()) {
return {};
}
/**
* WebGL component datatypes. Components are intrinsics,
* which form attributes, which form vertices.
*
* @exports ComponentDatatype
*/
var ComponentDatatype = {
/**
* 8-bit signed byte corresponding to gl.BYTE and the type
* of an element in Int8Array.
*
* @type {Number}
* @constant
*/
BYTE : WebGLConstants.BYTE,
/**
* 8-bit unsigned byte corresponding to UNSIGNED_BYTE and the type
* of an element in Uint8Array.
*
* @type {Number}
* @constant
*/
UNSIGNED_BYTE : WebGLConstants.UNSIGNED_BYTE,
/**
* 16-bit signed short corresponding to SHORT and the type
* of an element in Int16Array.
*
* @type {Number}
* @constant
*/
SHORT : WebGLConstants.SHORT,
/**
* 16-bit unsigned short corresponding to UNSIGNED_SHORT and the type
* of an element in Uint16Array.
*
* @type {Number}
* @constant
*/
UNSIGNED_SHORT : WebGLConstants.UNSIGNED_SHORT,
/**
* 32-bit signed int corresponding to INT and the type
* of an element in Int32Array.
*
* @memberOf ComponentDatatype
*
* @type {Number}
* @constant
*/
INT : WebGLConstants.INT,
/**
* 32-bit unsigned int corresponding to UNSIGNED_INT and the type
* of an element in Uint32Array.
*
* @memberOf ComponentDatatype
*
* @type {Number}
* @constant
*/
UNSIGNED_INT : WebGLConstants.UNSIGNED_INT,
/**
* 32-bit floating-point corresponding to FLOAT and the type
* of an element in Float32Array.
*
* @type {Number}
* @constant
*/
FLOAT : WebGLConstants.FLOAT,
/**
* 64-bit floating-point corresponding to gl.DOUBLE (in Desktop OpenGL;
* this is not supported in WebGL, and is emulated in Cesium via {@link GeometryPipeline.encodeAttribute})
* and the type of an element in Float64Array.
*
* @memberOf ComponentDatatype
*
* @type {Number}
* @constant
* @default 0x140A
*/
DOUBLE : WebGLConstants.DOUBLE
};
/**
* Returns the size, in bytes, of the corresponding datatype.
*
* @param {ComponentDatatype} componentDatatype The component datatype to get the size of.
* @returns {Number} The size in bytes.
*
* @exception {DeveloperError} componentDatatype is not a valid value.
*
* @example
* // Returns Int8Array.BYTES_PER_ELEMENT
* var size = Cesium.ComponentDatatype.getSizeInBytes(Cesium.ComponentDatatype.BYTE);
*/
ComponentDatatype.getSizeInBytes = function(componentDatatype){
if (!defined(componentDatatype)) {
throw new DeveloperError('value is required.');
}
switch (componentDatatype) {
case ComponentDatatype.BYTE:
return Int8Array.BYTES_PER_ELEMENT;
case ComponentDatatype.UNSIGNED_BYTE:
return Uint8Array.BYTES_PER_ELEMENT;
case ComponentDatatype.SHORT:
return Int16Array.BYTES_PER_ELEMENT;
case ComponentDatatype.UNSIGNED_SHORT:
return Uint16Array.BYTES_PER_ELEMENT;
case ComponentDatatype.INT:
return Int32Array.BYTES_PER_ELEMENT;
case ComponentDatatype.UNSIGNED_INT:
return Uint32Array.BYTES_PER_ELEMENT;
case ComponentDatatype.FLOAT:
return Float32Array.BYTES_PER_ELEMENT;
case ComponentDatatype.DOUBLE:
return Float64Array.BYTES_PER_ELEMENT;
default:
throw new DeveloperError('componentDatatype is not a valid value.');
}
};
/**
* Gets the {@link ComponentDatatype} for the provided TypedArray instance.
*
* @param {TypedArray} array The typed array.
* @returns {ComponentDatatype} The ComponentDatatype for the provided array, or undefined if the array is not a TypedArray.
*/
ComponentDatatype.fromTypedArray = function(array) {
if (array instanceof Int8Array) {
return ComponentDatatype.BYTE;
}
if (array instanceof Uint8Array) {
return ComponentDatatype.UNSIGNED_BYTE;
}
if (array instanceof Int16Array) {
return ComponentDatatype.SHORT;
}
if (array instanceof Uint16Array) {
return ComponentDatatype.UNSIGNED_SHORT;
}
if (array instanceof Int32Array) {
return ComponentDatatype.INT;
}
if (array instanceof Uint32Array) {
return ComponentDatatype.UNSIGNED_INT;
}
if (array instanceof Float32Array) {
return ComponentDatatype.FLOAT;
}
if (array instanceof Float64Array) {
return ComponentDatatype.DOUBLE;
}
};
/**
* Validates that the provided component datatype is a valid {@link ComponentDatatype}
*
* @param {ComponentDatatype} componentDatatype The component datatype to validate.
* @returns {Boolean} true if the provided component datatype is a valid value; otherwise, false.
*
* @example
* if (!Cesium.ComponentDatatype.validate(componentDatatype)) {
* throw new Cesium.DeveloperError('componentDatatype must be a valid value.');
* }
*/
ComponentDatatype.validate = function(componentDatatype) {
return defined(componentDatatype) &&
(componentDatatype === ComponentDatatype.BYTE ||
componentDatatype === ComponentDatatype.UNSIGNED_BYTE ||
componentDatatype === ComponentDatatype.SHORT ||
componentDatatype === ComponentDatatype.UNSIGNED_SHORT ||
componentDatatype === ComponentDatatype.INT ||
componentDatatype === ComponentDatatype.UNSIGNED_INT ||
componentDatatype === ComponentDatatype.FLOAT ||
componentDatatype === ComponentDatatype.DOUBLE);
};
/**
* Creates a typed array corresponding to component data type.
*
* @param {ComponentDatatype} componentDatatype The component data type.
* @param {Number|Array} valuesOrLength The length of the array to create or an array.
* @returns {Int8Array|Uint8Array|Int16Array|Uint16Array|Int32Array|Uint32Array|Float32Array|Float64Array} A typed array.
*
* @exception {DeveloperError} componentDatatype is not a valid value.
*
* @example
* // creates a Float32Array with length of 100
* var typedArray = Cesium.ComponentDatatype.createTypedArray(Cesium.ComponentDatatype.FLOAT, 100);
*/
ComponentDatatype.createTypedArray = function(componentDatatype, valuesOrLength) {
if (!defined(componentDatatype)) {
throw new DeveloperError('componentDatatype is required.');
}
if (!defined(valuesOrLength)) {
throw new DeveloperError('valuesOrLength is required.');
}
switch (componentDatatype) {
case ComponentDatatype.BYTE:
return new Int8Array(valuesOrLength);
case ComponentDatatype.UNSIGNED_BYTE:
return new Uint8Array(valuesOrLength);
case ComponentDatatype.SHORT:
return new Int16Array(valuesOrLength);
case ComponentDatatype.UNSIGNED_SHORT:
return new Uint16Array(valuesOrLength);
case ComponentDatatype.INT:
return new Int32Array(valuesOrLength);
case ComponentDatatype.UNSIGNED_INT:
return new Uint32Array(valuesOrLength);
case ComponentDatatype.FLOAT:
return new Float32Array(valuesOrLength);
case ComponentDatatype.DOUBLE:
return new Float64Array(valuesOrLength);
default:
throw new DeveloperError('componentDatatype is not a valid value.');
}
};
/**
* Creates a typed view of an array of bytes.
*
* @param {ComponentDatatype} componentDatatype The type of the view to create.
* @param {ArrayBuffer} buffer The buffer storage to use for the view.
* @param {Number} [byteOffset] The offset, in bytes, to the first element in the view.
* @param {Number} [length] The number of elements in the view.
* @returns {Int8Array|Uint8Array|Int16Array|Uint16Array|Int32Array|Uint32Array|Float32Array|Float64Array} A typed array view of the buffer.
*
* @exception {DeveloperError} componentDatatype is not a valid value.
*/
ComponentDatatype.createArrayBufferView = function(componentDatatype, buffer, byteOffset, length) {
if (!defined(componentDatatype)) {
throw new DeveloperError('componentDatatype is required.');
}
if (!defined(buffer)) {
throw new DeveloperError('buffer is required.');
}
byteOffset = defaultValue(byteOffset, 0);
length = defaultValue(length, (buffer.byteLength - byteOffset) / ComponentDatatype.getSizeInBytes(componentDatatype));
switch (componentDatatype) {
case ComponentDatatype.BYTE:
return new Int8Array(buffer, byteOffset, length);
case ComponentDatatype.UNSIGNED_BYTE:
return new Uint8Array(buffer, byteOffset, length);
case ComponentDatatype.SHORT:
return new Int16Array(buffer, byteOffset, length);
case ComponentDatatype.UNSIGNED_SHORT:
return new Uint16Array(buffer, byteOffset, length);
case ComponentDatatype.INT:
return new Int32Array(buffer, byteOffset, length);
case ComponentDatatype.UNSIGNED_INT:
return new Uint32Array(buffer, byteOffset, length);
case ComponentDatatype.FLOAT:
return new Float32Array(buffer, byteOffset, length);
case ComponentDatatype.DOUBLE:
return new Float64Array(buffer, byteOffset, length);
default:
throw new DeveloperError('componentDatatype is not a valid value.');
}
};
/**
* Get the ComponentDatatype from its name.
*
* @param {String} name The name of the ComponentDatatype.
* @returns {ComponentDatatype} The ComponentDatatype.
*
* @exception {DeveloperError} name is not a valid value.
*/
ComponentDatatype.fromName = function(name) {
switch (name) {
case 'BYTE':
return ComponentDatatype.BYTE;
case 'UNSIGNED_BYTE':
return ComponentDatatype.UNSIGNED_BYTE;
case 'SHORT':
return ComponentDatatype.SHORT;
case 'UNSIGNED_SHORT':
return ComponentDatatype.UNSIGNED_SHORT;
case 'INT':
return ComponentDatatype.INT;
case 'UNSIGNED_INT':
return ComponentDatatype.UNSIGNED_INT;
case 'FLOAT':
return ComponentDatatype.FLOAT;
case 'DOUBLE':
return ComponentDatatype.DOUBLE;
default:
throw new DeveloperError('name is not a valid value.');
}
};
return freezeObject(ComponentDatatype);
});
/*global define*/
define('Core/GeometryType',[
'./freezeObject'
], function(
freezeObject) {
'use strict';
/**
* @private
*/
var GeometryType = {
NONE : 0,
TRIANGLES : 1,
LINES : 2,
POLYLINES : 3
};
return freezeObject(GeometryType);
});
/*global define*/
define('Core/PrimitiveType',[
'./freezeObject',
'./WebGLConstants'
], function(
freezeObject,
WebGLConstants) {
'use strict';
/**
* The type of a geometric primitive, i.e., points, lines, and triangles.
*
* @exports PrimitiveType
*/
var PrimitiveType = {
/**
* Points primitive where each vertex (or index) is a separate point.
*
* @type {Number}
* @constant
*/
POINTS : WebGLConstants.POINTS,
/**
* Lines primitive where each two vertices (or indices) is a line segment. Line segments are not necessarily connected.
*
* @type {Number}
* @constant
*/
LINES : WebGLConstants.LINES,
/**
* Line loop primitive where each vertex (or index) after the first connects a line to
* the previous vertex, and the last vertex implicitly connects to the first.
*
* @type {Number}
* @constant
*/
LINE_LOOP : WebGLConstants.LINE_LOOP,
/**
* Line strip primitive where each vertex (or index) after the first connects a line to the previous vertex.
*
* @type {Number}
* @constant
*/
LINE_STRIP : WebGLConstants.LINE_STRIP,
/**
* Triangles primitive where each three vertices (or indices) is a triangle. Triangles do not necessarily share edges.
*
* @type {Number}
* @constant
*/
TRIANGLES : WebGLConstants.TRIANGLES,
/**
* Triangle strip primitive where each vertex (or index) after the first two connect to
* the previous two vertices forming a triangle. For example, this can be used to model a wall.
*
* @type {Number}
* @constant
*/
TRIANGLE_STRIP : WebGLConstants.TRIANGLE_STRIP,
/**
* Triangle fan primitive where each vertex (or index) after the first two connect to
* the previous vertex and the first vertex forming a triangle. For example, this can be used
* to model a cone or circle.
*
* @type {Number}
* @constant
*/
TRIANGLE_FAN : WebGLConstants.TRIANGLE_FAN,
/**
* @private
*/
validate : function(primitiveType) {
return primitiveType === PrimitiveType.POINTS ||
primitiveType === PrimitiveType.LINES ||
primitiveType === PrimitiveType.LINE_LOOP ||
primitiveType === PrimitiveType.LINE_STRIP ||
primitiveType === PrimitiveType.TRIANGLES ||
primitiveType === PrimitiveType.TRIANGLE_STRIP ||
primitiveType === PrimitiveType.TRIANGLE_FAN;
}
};
return freezeObject(PrimitiveType);
});
/*global define*/
define('Core/Geometry',[
'./defaultValue',
'./defined',
'./DeveloperError',
'./GeometryType',
'./PrimitiveType'
], function(
defaultValue,
defined,
DeveloperError,
GeometryType,
PrimitiveType) {
'use strict';
/**
* A geometry representation with attributes forming vertices and optional index data
* defining primitives. Geometries and an {@link Appearance}, which describes the shading,
* can be assigned to a {@link Primitive} for visualization. A Primitive can
* be created from many heterogeneous - in many cases - geometries for performance.
*
* Geometries can be transformed and optimized using functions in {@link GeometryPipeline}.
*
*
* @alias Geometry
* @constructor
*
* @param {Object} options Object with the following properties:
* @param {GeometryAttributes} options.attributes Attributes, which make up the geometry's vertices.
* @param {PrimitiveType} [options.primitiveType=PrimitiveType.TRIANGLES] The type of primitives in the geometry.
* @param {Uint16Array|Uint32Array} [options.indices] Optional index data that determines the primitives in the geometry.
* @param {BoundingSphere} [options.boundingSphere] An optional bounding sphere that fully enclosed the geometry.
*
* @see PolygonGeometry
* @see RectangleGeometry
* @see EllipseGeometry
* @see CircleGeometry
* @see WallGeometry
* @see SimplePolylineGeometry
* @see BoxGeometry
* @see EllipsoidGeometry
*
* @demo {@link http://cesiumjs.org/Cesium/Apps/Sandcastle/index.html?src=Geometry%20and%20Appearances.html|Geometry and Appearances Demo}
*
* @example
* // Create geometry with a position attribute and indexed lines.
* var positions = new Float64Array([
* 0.0, 0.0, 0.0,
* 7500000.0, 0.0, 0.0,
* 0.0, 7500000.0, 0.0
* ]);
*
* var geometry = new Cesium.Geometry({
* attributes : {
* position : new Cesium.GeometryAttribute({
* componentDatatype : Cesium.ComponentDatatype.DOUBLE,
* componentsPerAttribute : 3,
* values : positions
* })
* },
* indices : new Uint16Array([0, 1, 1, 2, 2, 0]),
* primitiveType : Cesium.PrimitiveType.LINES,
* boundingSphere : Cesium.BoundingSphere.fromVertices(positions)
* });
*/
function Geometry(options) {
options = defaultValue(options, defaultValue.EMPTY_OBJECT);
if (!defined(options.attributes)) {
throw new DeveloperError('options.attributes is required.');
}
/**
* Attributes, which make up the geometry's vertices. Each property in this object corresponds to a
* {@link GeometryAttribute} containing the attribute's data.
*
* Attributes are always stored non-interleaved in a Geometry.
*
*
* There are reserved attribute names with well-known semantics. The following attributes
* are created by a Geometry (depending on the provided {@link VertexFormat}.
*
* position - 3D vertex position. 64-bit floating-point (for precision). 3 components per attribute. See {@link VertexFormat#position}.normal - Normal (normalized), commonly used for lighting. 32-bit floating-point. 3 components per attribute. See {@link VertexFormat#normal}.st - 2D texture coordinate. 32-bit floating-point. 2 components per attribute. See {@link VertexFormat#st}.binormal - Binormal (normalized), used for tangent-space effects like bump mapping. 32-bit floating-point. 3 components per attribute. See {@link VertexFormat#binormal}.tangent - Tangent (normalized), used for tangent-space effects like bump mapping. 32-bit floating-point. 3 components per attribute. See {@link VertexFormat#tangent}.
*
*
* The following attribute names are generally not created by a Geometry, but are added
* to a Geometry by a {@link Primitive} or {@link GeometryPipeline} functions to prepare
* the geometry for rendering.
*
* position3DHigh - High 32 bits for encoded 64-bit position computed with {@link GeometryPipeline.encodeAttribute}. 32-bit floating-point. 4 components per attribute.position3DLow - Low 32 bits for encoded 64-bit position computed with {@link GeometryPipeline.encodeAttribute}. 32-bit floating-point. 4 components per attribute.position3DHigh - High 32 bits for encoded 64-bit 2D (Columbus view) position computed with {@link GeometryPipeline.encodeAttribute}. 32-bit floating-point. 4 components per attribute.position2DLow - Low 32 bits for encoded 64-bit 2D (Columbus view) position computed with {@link GeometryPipeline.encodeAttribute}. 32-bit floating-point. 4 components per attribute.color - RGBA color (normalized) usually from {@link GeometryInstance#color}. 32-bit floating-point. 4 components per attribute.pickColor - RGBA color used for picking. 32-bit floating-point. 4 components per attribute.
*
*
* @type GeometryAttributes
*
* @default undefined
*
*
* @example
* geometry.attributes.position = new Cesium.GeometryAttribute({
* componentDatatype : Cesium.ComponentDatatype.FLOAT,
* componentsPerAttribute : 3,
* values : new Float32Array(0)
* });
*
* @see GeometryAttribute
* @see VertexFormat
*/
this.attributes = options.attributes;
/**
* Optional index data that - along with {@link Geometry#primitiveType} -
* determines the primitives in the geometry.
*
* @type Array
*
* @default undefined
*/
this.indices = options.indices;
/**
* The type of primitives in the geometry. This is most often {@link PrimitiveType.TRIANGLES},
* but can varying based on the specific geometry.
*
* @type PrimitiveType
*
* @default undefined
*/
this.primitiveType = defaultValue(options.primitiveType, PrimitiveType.TRIANGLES);
/**
* An optional bounding sphere that fully encloses the geometry. This is
* commonly used for culling.
*
* @type BoundingSphere
*
* @default undefined
*/
this.boundingSphere = options.boundingSphere;
/**
* @private
*/
this.geometryType = defaultValue(options.geometryType, GeometryType.NONE);
/**
* @private
*/
this.boundingSphereCV = options.boundingSphereCV;
}
/**
* Computes the number of vertices in a geometry. The runtime is linear with
* respect to the number of attributes in a vertex, not the number of vertices.
*
* @param {Geometry} geometry The geometry.
* @returns {Number} The number of vertices in the geometry.
*
* @example
* var numVertices = Cesium.Geometry.computeNumberOfVertices(geometry);
*/
Geometry.computeNumberOfVertices = function(geometry) {
if (!defined(geometry)) {
throw new DeveloperError('geometry is required.');
}
var numberOfVertices = -1;
for ( var property in geometry.attributes) {
if (geometry.attributes.hasOwnProperty(property) &&
defined(geometry.attributes[property]) &&
defined(geometry.attributes[property].values)) {
var attribute = geometry.attributes[property];
var num = attribute.values.length / attribute.componentsPerAttribute;
if ((numberOfVertices !== num) && (numberOfVertices !== -1)) {
throw new DeveloperError('All attribute lists must have the same number of attributes.');
}
numberOfVertices = num;
}
}
return numberOfVertices;
};
return Geometry;
});
/*global define*/
define('Core/GeometryAttribute',[
'./defaultValue',
'./defined',
'./DeveloperError'
], function(
defaultValue,
defined,
DeveloperError) {
'use strict';
/**
* Values and type information for geometry attributes. A {@link Geometry}
* generally contains one or more attributes. All attributes together form
* the geometry's vertices.
*
* @alias GeometryAttribute
* @constructor
*
* @param {Object} [options] Object with the following properties:
* @param {ComponentDatatype} [options.componentDatatype] The datatype of each component in the attribute, e.g., individual elements in values.
* @param {Number} [options.componentsPerAttribute] A number between 1 and 4 that defines the number of components in an attributes.
* @param {Boolean} [options.normalize=false] When true and componentDatatype is an integer format, indicate that the components should be mapped to the range [0, 1] (unsigned) or [-1, 1] (signed) when they are accessed as floating-point for rendering.
* @param {TypedArray} [options.values] The values for the attributes stored in a typed array.
*
* @exception {DeveloperError} options.componentsPerAttribute must be between 1 and 4.
*
*
* @example
* var geometry = new Cesium.Geometry({
* attributes : {
* position : new Cesium.GeometryAttribute({
* componentDatatype : Cesium.ComponentDatatype.FLOAT,
* componentsPerAttribute : 3,
* values : new Float32Array([
* 0.0, 0.0, 0.0,
* 7500000.0, 0.0, 0.0,
* 0.0, 7500000.0, 0.0
* ])
* })
* },
* primitiveType : Cesium.PrimitiveType.LINE_LOOP
* });
*
* @see Geometry
*/
function GeometryAttribute(options) {
options = defaultValue(options, defaultValue.EMPTY_OBJECT);
if (!defined(options.componentDatatype)) {
throw new DeveloperError('options.componentDatatype is required.');
}
if (!defined(options.componentsPerAttribute)) {
throw new DeveloperError('options.componentsPerAttribute is required.');
}
if (options.componentsPerAttribute < 1 || options.componentsPerAttribute > 4) {
throw new DeveloperError('options.componentsPerAttribute must be between 1 and 4.');
}
if (!defined(options.values)) {
throw new DeveloperError('options.values is required.');
}
/**
* The datatype of each component in the attribute, e.g., individual elements in
* {@link GeometryAttribute#values}.
*
* @type ComponentDatatype
*
* @default undefined
*/
this.componentDatatype = options.componentDatatype;
/**
* A number between 1 and 4 that defines the number of components in an attributes.
* For example, a position attribute with x, y, and z components would have 3 as
* shown in the code example.
*
* @type Number
*
* @default undefined
*
* @example
* attribute.componentDatatype = Cesium.ComponentDatatype.FLOAT;
* attribute.componentsPerAttribute = 3;
* attribute.values = new Float32Array([
* 0.0, 0.0, 0.0,
* 7500000.0, 0.0, 0.0,
* 0.0, 7500000.0, 0.0
* ]);
*/
this.componentsPerAttribute = options.componentsPerAttribute;
/**
* When true and componentDatatype is an integer format,
* indicate that the components should be mapped to the range [0, 1] (unsigned)
* or [-1, 1] (signed) when they are accessed as floating-point for rendering.
*
* This is commonly used when storing colors using {@link ComponentDatatype.UNSIGNED_BYTE}.
*
*
* @type Boolean
*
* @default false
*
* @example
* attribute.componentDatatype = Cesium.ComponentDatatype.UNSIGNED_BYTE;
* attribute.componentsPerAttribute = 4;
* attribute.normalize = true;
* attribute.values = new Uint8Array([
* Cesium.Color.floatToByte(color.red),
* Cesium.Color.floatToByte(color.green),
* Cesium.Color.floatToByte(color.blue),
* Cesium.Color.floatToByte(color.alpha)
* ]);
*/
this.normalize = defaultValue(options.normalize, false);
/**
* The values for the attributes stored in a typed array. In the code example,
* every three elements in values defines one attributes since
* componentsPerAttribute is 3.
*
* @type TypedArray
*
* @default undefined
*
* @example
* attribute.componentDatatype = Cesium.ComponentDatatype.FLOAT;
* attribute.componentsPerAttribute = 3;
* attribute.values = new Float32Array([
* 0.0, 0.0, 0.0,
* 7500000.0, 0.0, 0.0,
* 0.0, 7500000.0, 0.0
* ]);
*/
this.values = options.values;
}
return GeometryAttribute;
});
/*global define*/
define('Core/GeometryAttributes',[
'./defaultValue'
], function(
defaultValue) {
'use strict';
/**
* Attributes, which make up a geometry's vertices. Each property in this object corresponds to a
* {@link GeometryAttribute} containing the attribute's data.
*
* Attributes are always stored non-interleaved in a Geometry.
*
*
* @alias GeometryAttributes
* @constructor
*/
function GeometryAttributes(options) {
options = defaultValue(options, defaultValue.EMPTY_OBJECT);
/**
* The 3D position attribute.
*
* 64-bit floating-point (for precision). 3 components per attribute.
*
*
* @type GeometryAttribute
*
* @default undefined
*/
this.position = options.position;
/**
* The normal attribute (normalized), which is commonly used for lighting.
*
* 32-bit floating-point. 3 components per attribute.
*
*
* @type GeometryAttribute
*
* @default undefined
*/
this.normal = options.normal;
/**
* The 2D texture coordinate attribute.
*
* 32-bit floating-point. 2 components per attribute
*
*
* @type GeometryAttribute
*
* @default undefined
*/
this.st = options.st;
/**
* The binormal attribute (normalized), which is used for tangent-space effects like bump mapping.
*
* 32-bit floating-point. 3 components per attribute.
*
*
* @type GeometryAttribute
*
* @default undefined
*/
this.binormal = options.binormal;
/**
* The tangent attribute (normalized), which is used for tangent-space effects like bump mapping.
*
* 32-bit floating-point. 3 components per attribute.
*
*
* @type GeometryAttribute
*
* @default undefined
*/
this.tangent = options.tangent;
/**
* The color attribute.
*
* 8-bit unsigned integer. 4 components per attribute.
*
*
* @type GeometryAttribute
*
* @default undefined
*/
this.color = options.color;
}
return GeometryAttributes;
});
/*global define*/
define('Core/IndexDatatype',[
'./defined',
'./DeveloperError',
'./freezeObject',
'./Math',
'./WebGLConstants'
], function(
defined,
DeveloperError,
freezeObject,
CesiumMath,
WebGLConstants) {
'use strict';
/**
* Constants for WebGL index datatypes. These corresponds to the
* type parameter of {@link http://www.khronos.org/opengles/sdk/docs/man/xhtml/glDrawElements.xml|drawElements}.
*
* @exports IndexDatatype
*/
var IndexDatatype = {
/**
* 8-bit unsigned byte corresponding to UNSIGNED_BYTE and the type
* of an element in Uint8Array.
*
* @type {Number}
* @constant
*/
UNSIGNED_BYTE : WebGLConstants.UNSIGNED_BYTE,
/**
* 16-bit unsigned short corresponding to UNSIGNED_SHORT and the type
* of an element in Uint16Array.
*
* @type {Number}
* @constant
*/
UNSIGNED_SHORT : WebGLConstants.UNSIGNED_SHORT,
/**
* 32-bit unsigned int corresponding to UNSIGNED_INT and the type
* of an element in Uint32Array.
*
* @type {Number}
* @constant
*/
UNSIGNED_INT : WebGLConstants.UNSIGNED_INT
};
/**
* Returns the size, in bytes, of the corresponding datatype.
*
* @param {IndexDatatype} indexDatatype The index datatype to get the size of.
* @returns {Number} The size in bytes.
*
* @example
* // Returns 2
* var size = Cesium.IndexDatatype.getSizeInBytes(Cesium.IndexDatatype.UNSIGNED_SHORT);
*/
IndexDatatype.getSizeInBytes = function(indexDatatype) {
switch(indexDatatype) {
case IndexDatatype.UNSIGNED_BYTE:
return Uint8Array.BYTES_PER_ELEMENT;
case IndexDatatype.UNSIGNED_SHORT:
return Uint16Array.BYTES_PER_ELEMENT;
case IndexDatatype.UNSIGNED_INT:
return Uint32Array.BYTES_PER_ELEMENT;
}
throw new DeveloperError('indexDatatype is required and must be a valid IndexDatatype constant.');
};
/**
* Validates that the provided index datatype is a valid {@link IndexDatatype}.
*
* @param {IndexDatatype} indexDatatype The index datatype to validate.
* @returns {Boolean} true if the provided index datatype is a valid value; otherwise, false.
*
* @example
* if (!Cesium.IndexDatatype.validate(indexDatatype)) {
* throw new Cesium.DeveloperError('indexDatatype must be a valid value.');
* }
*/
IndexDatatype.validate = function(indexDatatype) {
return defined(indexDatatype) &&
(indexDatatype === IndexDatatype.UNSIGNED_BYTE ||
indexDatatype === IndexDatatype.UNSIGNED_SHORT ||
indexDatatype === IndexDatatype.UNSIGNED_INT);
};
/**
* Creates a typed array that will store indices, using either
* or Uint32Array depending on the number of vertices.
*
* @param {Number} numberOfVertices Number of vertices that the indices will reference.
* @param {Any} indicesLengthOrArray Passed through to the typed array constructor.
* @returns {Uint16Array|Uint32Array} A Uint16Array or Uint32Array constructed with indicesLengthOrArray.
*
* @example
* this.indices = Cesium.IndexDatatype.createTypedArray(positions.length / 3, numberOfIndices);
*/
IndexDatatype.createTypedArray = function(numberOfVertices, indicesLengthOrArray) {
if (!defined(numberOfVertices)) {
throw new DeveloperError('numberOfVertices is required.');
}
if (numberOfVertices >= CesiumMath.SIXTY_FOUR_KILOBYTES) {
return new Uint32Array(indicesLengthOrArray);
}
return new Uint16Array(indicesLengthOrArray);
};
/**
* Creates a typed array from a source array buffer. The resulting typed array will store indices, using either
* or Uint32Array depending on the number of vertices.
*
* @param {Number} numberOfVertices Number of vertices that the indices will reference.
* @param {ArrayBuffer} sourceArray Passed through to the typed array constructor.
* @param {Number} byteOffset Passed through to the typed array constructor.
* @param {Number} length Passed through to the typed array constructor.
* @returns {Uint16Array|Uint32Array} A Uint16Array or Uint32Array constructed with sourceArray, byteOffset, and length.
*
*/
IndexDatatype.createTypedArrayFromArrayBuffer = function(numberOfVertices, sourceArray, byteOffset, length) {
if (!defined(numberOfVertices)) {
throw new DeveloperError('numberOfVertices is required.');
}
if (!defined(sourceArray)) {
throw new DeveloperError('sourceArray is required.');
}
if (!defined(byteOffset)) {
throw new DeveloperError('byteOffset is required.');
}
if (numberOfVertices >= CesiumMath.SIXTY_FOUR_KILOBYTES) {
return new Uint32Array(sourceArray, byteOffset, length);
}
return new Uint16Array(sourceArray, byteOffset, length);
};
return freezeObject(IndexDatatype);
});
/*global define*/
define('Core/AxisAlignedBoundingBox',[
'./Cartesian3',
'./defaultValue',
'./defined',
'./DeveloperError',
'./Intersect'
], function(
Cartesian3,
defaultValue,
defined,
DeveloperError,
Intersect) {
'use strict';
/**
* Creates an instance of an AxisAlignedBoundingBox from the minimum and maximum points along the x, y, and z axes.
* @alias AxisAlignedBoundingBox
* @constructor
*
* @param {Cartesian3} [minimum=Cartesian3.ZERO] The minimum point along the x, y, and z axes.
* @param {Cartesian3} [maximum=Cartesian3.ZERO] The maximum point along the x, y, and z axes.
* @param {Cartesian3} [center] The center of the box; automatically computed if not supplied.
*
* @see BoundingSphere
* @see BoundingRectangle
*/
function AxisAlignedBoundingBox(minimum, maximum, center) {
/**
* The minimum point defining the bounding box.
* @type {Cartesian3}
* @default {@link Cartesian3.ZERO}
*/
this.minimum = Cartesian3.clone(defaultValue(minimum, Cartesian3.ZERO));
/**
* The maximum point defining the bounding box.
* @type {Cartesian3}
* @default {@link Cartesian3.ZERO}
*/
this.maximum = Cartesian3.clone(defaultValue(maximum, Cartesian3.ZERO));
//If center was not defined, compute it.
if (!defined(center)) {
center = Cartesian3.add(this.minimum, this.maximum, new Cartesian3());
Cartesian3.multiplyByScalar(center, 0.5, center);
} else {
center = Cartesian3.clone(center);
}
/**
* The center point of the bounding box.
* @type {Cartesian3}
*/
this.center = center;
}
/**
* Computes an instance of an AxisAlignedBoundingBox. The box is determined by
* finding the points spaced the farthest apart on the x, y, and z axes.
*
* @param {Cartesian3[]} positions List of points that the bounding box will enclose. Each point must have a x, y, and z properties.
* @param {AxisAlignedBoundingBox} [result] The object onto which to store the result.
* @returns {AxisAlignedBoundingBox} The modified result parameter or a new AxisAlignedBoundingBox instance if one was not provided.
*
* @example
* // Compute an axis aligned bounding box enclosing two points.
* var box = Cesium.AxisAlignedBoundingBox.fromPoints([new Cesium.Cartesian3(2, 0, 0), new Cesium.Cartesian3(-2, 0, 0)]);
*/
AxisAlignedBoundingBox.fromPoints = function(positions, result) {
if (!defined(result)) {
result = new AxisAlignedBoundingBox();
}
if (!defined(positions) || positions.length === 0) {
result.minimum = Cartesian3.clone(Cartesian3.ZERO, result.minimum);
result.maximum = Cartesian3.clone(Cartesian3.ZERO, result.maximum);
result.center = Cartesian3.clone(Cartesian3.ZERO, result.center);
return result;
}
var minimumX = positions[0].x;
var minimumY = positions[0].y;
var minimumZ = positions[0].z;
var maximumX = positions[0].x;
var maximumY = positions[0].y;
var maximumZ = positions[0].z;
var length = positions.length;
for ( var i = 1; i < length; i++) {
var p = positions[i];
var x = p.x;
var y = p.y;
var z = p.z;
minimumX = Math.min(x, minimumX);
maximumX = Math.max(x, maximumX);
minimumY = Math.min(y, minimumY);
maximumY = Math.max(y, maximumY);
minimumZ = Math.min(z, minimumZ);
maximumZ = Math.max(z, maximumZ);
}
var minimum = result.minimum;
minimum.x = minimumX;
minimum.y = minimumY;
minimum.z = minimumZ;
var maximum = result.maximum;
maximum.x = maximumX;
maximum.y = maximumY;
maximum.z = maximumZ;
var center = Cartesian3.add(minimum, maximum, result.center);
Cartesian3.multiplyByScalar(center, 0.5, center);
return result;
};
/**
* Duplicates a AxisAlignedBoundingBox instance.
*
* @param {AxisAlignedBoundingBox} box The bounding box to duplicate.
* @param {AxisAlignedBoundingBox} [result] The object onto which to store the result.
* @returns {AxisAlignedBoundingBox} The modified result parameter or a new AxisAlignedBoundingBox instance if none was provided. (Returns undefined if box is undefined)
*/
AxisAlignedBoundingBox.clone = function(box, result) {
if (!defined(box)) {
return undefined;
}
if (!defined(result)) {
return new AxisAlignedBoundingBox(box.minimum, box.maximum);
}
result.minimum = Cartesian3.clone(box.minimum, result.minimum);
result.maximum = Cartesian3.clone(box.maximum, result.maximum);
result.center = Cartesian3.clone(box.center, result.center);
return result;
};
/**
* Compares the provided AxisAlignedBoundingBox componentwise and returns
* true if they are equal, false otherwise.
*
* @param {AxisAlignedBoundingBox} [left] The first AxisAlignedBoundingBox.
* @param {AxisAlignedBoundingBox} [right] The second AxisAlignedBoundingBox.
* @returns {Boolean} true if left and right are equal, false otherwise.
*/
AxisAlignedBoundingBox.equals = function(left, right) {
return (left === right) ||
((defined(left)) &&
(defined(right)) &&
Cartesian3.equals(left.center, right.center) &&
Cartesian3.equals(left.minimum, right.minimum) &&
Cartesian3.equals(left.maximum, right.maximum));
};
var intersectScratch = new Cartesian3();
/**
* Determines which side of a plane a box is located.
*
* @param {AxisAlignedBoundingBox} box The bounding box to test.
* @param {Plane} plane The plane to test against.
* @returns {Intersect} {@link Intersect.INSIDE} if the entire box is on the side of the plane
* the normal is pointing, {@link Intersect.OUTSIDE} if the entire box is
* on the opposite side, and {@link Intersect.INTERSECTING} if the box
* intersects the plane.
*/
AxisAlignedBoundingBox.intersectPlane = function(box, plane) {
if (!defined(box)) {
throw new DeveloperError('box is required.');
}
if (!defined(plane)) {
throw new DeveloperError('plane is required.');
}
intersectScratch = Cartesian3.subtract(box.maximum, box.minimum, intersectScratch);
var h = Cartesian3.multiplyByScalar(intersectScratch, 0.5, intersectScratch); //The positive half diagonal
var normal = plane.normal;
var e = h.x * Math.abs(normal.x) + h.y * Math.abs(normal.y) + h.z * Math.abs(normal.z);
var s = Cartesian3.dot(box.center, normal) + plane.distance; //signed distance from center
if (s - e > 0) {
return Intersect.INSIDE;
}
if (s + e < 0) {
//Not in front because normals point inward
return Intersect.OUTSIDE;
}
return Intersect.INTERSECTING;
};
/**
* Duplicates this AxisAlignedBoundingBox instance.
*
* @param {AxisAlignedBoundingBox} [result] The object onto which to store the result.
* @returns {AxisAlignedBoundingBox} The modified result parameter or a new AxisAlignedBoundingBox instance if one was not provided.
*/
AxisAlignedBoundingBox.prototype.clone = function(result) {
return AxisAlignedBoundingBox.clone(this, result);
};
/**
* Determines which side of a plane this box is located.
*
* @param {Plane} plane The plane to test against.
* @returns {Intersect} {@link Intersect.INSIDE} if the entire box is on the side of the plane
* the normal is pointing, {@link Intersect.OUTSIDE} if the entire box is
* on the opposite side, and {@link Intersect.INTERSECTING} if the box
* intersects the plane.
*/
AxisAlignedBoundingBox.prototype.intersectPlane = function(plane) {
return AxisAlignedBoundingBox.intersectPlane(this, plane);
};
/**
* Compares this AxisAlignedBoundingBox against the provided AxisAlignedBoundingBox componentwise and returns
* true if they are equal, false otherwise.
*
* @param {AxisAlignedBoundingBox} [right] The right hand side AxisAlignedBoundingBox.
* @returns {Boolean} true if they are equal, false otherwise.
*/
AxisAlignedBoundingBox.prototype.equals = function(right) {
return AxisAlignedBoundingBox.equals(this, right);
};
return AxisAlignedBoundingBox;
});
/*global define*/
define('Core/Cartesian2',[
'./defaultValue',
'./defined',
'./DeveloperError',
'./freezeObject',
'./Math'
], function(
defaultValue,
defined,
DeveloperError,
freezeObject,
CesiumMath) {
'use strict';
/**
* A 2D Cartesian point.
* @alias Cartesian2
* @constructor
*
* @param {Number} [x=0.0] The X component.
* @param {Number} [y=0.0] The Y component.
*
* @see Cartesian3
* @see Cartesian4
* @see Packable
*/
function Cartesian2(x, y) {
/**
* The X component.
* @type {Number}
* @default 0.0
*/
this.x = defaultValue(x, 0.0);
/**
* The Y component.
* @type {Number}
* @default 0.0
*/
this.y = defaultValue(y, 0.0);
}
/**
* Creates a Cartesian2 instance from x and y coordinates.
*
* @param {Number} x The x coordinate.
* @param {Number} y The y coordinate.
* @param {Cartesian2} [result] The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter or a new Cartesian2 instance if one was not provided.
*/
Cartesian2.fromElements = function(x, y, result) {
if (!defined(result)) {
return new Cartesian2(x, y);
}
result.x = x;
result.y = y;
return result;
};
/**
* Duplicates a Cartesian2 instance.
*
* @param {Cartesian2} cartesian The Cartesian to duplicate.
* @param {Cartesian2} [result] The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter or a new Cartesian2 instance if one was not provided. (Returns undefined if cartesian is undefined)
*/
Cartesian2.clone = function(cartesian, result) {
if (!defined(cartesian)) {
return undefined;
}
if (!defined(result)) {
return new Cartesian2(cartesian.x, cartesian.y);
}
result.x = cartesian.x;
result.y = cartesian.y;
return result;
};
/**
* Creates a Cartesian2 instance from an existing Cartesian3. This simply takes the
* x and y properties of the Cartesian3 and drops z.
* @function
*
* @param {Cartesian3} cartesian The Cartesian3 instance to create a Cartesian2 instance from.
* @param {Cartesian2} [result] The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter or a new Cartesian2 instance if one was not provided.
*/
Cartesian2.fromCartesian3 = Cartesian2.clone;
/**
* Creates a Cartesian2 instance from an existing Cartesian4. This simply takes the
* x and y properties of the Cartesian4 and drops z and w.
* @function
*
* @param {Cartesian4} cartesian The Cartesian4 instance to create a Cartesian2 instance from.
* @param {Cartesian2} [result] The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter or a new Cartesian2 instance if one was not provided.
*/
Cartesian2.fromCartesian4 = Cartesian2.clone;
/**
* The number of elements used to pack the object into an array.
* @type {Number}
*/
Cartesian2.packedLength = 2;
/**
* Stores the provided instance into the provided array.
*
* @param {Cartesian2} value The value to pack.
* @param {Number[]} array The array to pack into.
* @param {Number} [startingIndex=0] The index into the array at which to start packing the elements.
*
* @returns {Number[]} The array that was packed into
*/
Cartesian2.pack = function(value, array, startingIndex) {
if (!defined(value)) {
throw new DeveloperError('value is required');
}
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
array[startingIndex++] = value.x;
array[startingIndex] = value.y;
return array;
};
/**
* Retrieves an instance from a packed array.
*
* @param {Number[]} array The packed array.
* @param {Number} [startingIndex=0] The starting index of the element to be unpacked.
* @param {Cartesian2} [result] The object into which to store the result.
* @returns {Cartesian2} The modified result parameter or a new Cartesian2 instance if one was not provided.
*/
Cartesian2.unpack = function(array, startingIndex, result) {
if (!defined(array)) {
throw new DeveloperError('array is required');
}
startingIndex = defaultValue(startingIndex, 0);
if (!defined(result)) {
result = new Cartesian2();
}
result.x = array[startingIndex++];
result.y = array[startingIndex];
return result;
};
/**
* Flattens an array of Cartesian2s into and array of components.
*
* @param {Cartesian2[]} array The array of cartesians to pack.
* @param {Number[]} result The array onto which to store the result.
* @returns {Number[]} The packed array.
*/
Cartesian2.packArray = function(array, result) {
if (!defined(array)) {
throw new DeveloperError('array is required');
}
var length = array.length;
if (!defined(result)) {
result = new Array(length * 2);
} else {
result.length = length * 2;
}
for (var i = 0; i < length; ++i) {
Cartesian2.pack(array[i], result, i * 2);
}
return result;
};
/**
* Unpacks an array of cartesian components into and array of Cartesian2s.
*
* @param {Number[]} array The array of components to unpack.
* @param {Cartesian2[]} result The array onto which to store the result.
* @returns {Cartesian2[]} The unpacked array.
*/
Cartesian2.unpackArray = function(array, result) {
if (!defined(array)) {
throw new DeveloperError('array is required');
}
var length = array.length;
if (!defined(result)) {
result = new Array(length / 2);
} else {
result.length = length / 2;
}
for (var i = 0; i < length; i += 2) {
var index = i / 2;
result[index] = Cartesian2.unpack(array, i, result[index]);
}
return result;
};
/**
* Creates a Cartesian2 from two consecutive elements in an array.
* @function
*
* @param {Number[]} array The array whose two consecutive elements correspond to the x and y components, respectively.
* @param {Number} [startingIndex=0] The offset into the array of the first element, which corresponds to the x component.
* @param {Cartesian2} [result] The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter or a new Cartesian2 instance if one was not provided.
*
* @example
* // Create a Cartesian2 with (1.0, 2.0)
* var v = [1.0, 2.0];
* var p = Cesium.Cartesian2.fromArray(v);
*
* // Create a Cartesian2 with (1.0, 2.0) using an offset into an array
* var v2 = [0.0, 0.0, 1.0, 2.0];
* var p2 = Cesium.Cartesian2.fromArray(v2, 2);
*/
Cartesian2.fromArray = Cartesian2.unpack;
/**
* Computes the value of the maximum component for the supplied Cartesian.
*
* @param {Cartesian2} cartesian The cartesian to use.
* @returns {Number} The value of the maximum component.
*/
Cartesian2.maximumComponent = function(cartesian) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
return Math.max(cartesian.x, cartesian.y);
};
/**
* Computes the value of the minimum component for the supplied Cartesian.
*
* @param {Cartesian2} cartesian The cartesian to use.
* @returns {Number} The value of the minimum component.
*/
Cartesian2.minimumComponent = function(cartesian) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
return Math.min(cartesian.x, cartesian.y);
};
/**
* Compares two Cartesians and computes a Cartesian which contains the minimum components of the supplied Cartesians.
*
* @param {Cartesian2} first A cartesian to compare.
* @param {Cartesian2} second A cartesian to compare.
* @param {Cartesian2} result The object into which to store the result.
* @returns {Cartesian2} A cartesian with the minimum components.
*/
Cartesian2.minimumByComponent = function(first, second, result) {
if (!defined(first)) {
throw new DeveloperError('first is required.');
}
if (!defined(second)) {
throw new DeveloperError('second is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required.');
}
result.x = Math.min(first.x, second.x);
result.y = Math.min(first.y, second.y);
return result;
};
/**
* Compares two Cartesians and computes a Cartesian which contains the maximum components of the supplied Cartesians.
*
* @param {Cartesian2} first A cartesian to compare.
* @param {Cartesian2} second A cartesian to compare.
* @param {Cartesian2} result The object into which to store the result.
* @returns {Cartesian2} A cartesian with the maximum components.
*/
Cartesian2.maximumByComponent = function(first, second, result) {
if (!defined(first)) {
throw new DeveloperError('first is required.');
}
if (!defined(second)) {
throw new DeveloperError('second is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required.');
}
result.x = Math.max(first.x, second.x);
result.y = Math.max(first.y, second.y);
return result;
};
/**
* Computes the provided Cartesian's squared magnitude.
*
* @param {Cartesian2} cartesian The Cartesian instance whose squared magnitude is to be computed.
* @returns {Number} The squared magnitude.
*/
Cartesian2.magnitudeSquared = function(cartesian) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
return cartesian.x * cartesian.x + cartesian.y * cartesian.y;
};
/**
* Computes the Cartesian's magnitude (length).
*
* @param {Cartesian2} cartesian The Cartesian instance whose magnitude is to be computed.
* @returns {Number} The magnitude.
*/
Cartesian2.magnitude = function(cartesian) {
return Math.sqrt(Cartesian2.magnitudeSquared(cartesian));
};
var distanceScratch = new Cartesian2();
/**
* Computes the distance between two points.
*
* @param {Cartesian2} left The first point to compute the distance from.
* @param {Cartesian2} right The second point to compute the distance to.
* @returns {Number} The distance between two points.
*
* @example
* // Returns 1.0
* var d = Cesium.Cartesian2.distance(new Cesium.Cartesian2(1.0, 0.0), new Cesium.Cartesian2(2.0, 0.0));
*/
Cartesian2.distance = function(left, right) {
if (!defined(left) || !defined(right)) {
throw new DeveloperError('left and right are required.');
}
Cartesian2.subtract(left, right, distanceScratch);
return Cartesian2.magnitude(distanceScratch);
};
/**
* Computes the squared distance between two points. Comparing squared distances
* using this function is more efficient than comparing distances using {@link Cartesian2#distance}.
*
* @param {Cartesian2} left The first point to compute the distance from.
* @param {Cartesian2} right The second point to compute the distance to.
* @returns {Number} The distance between two points.
*
* @example
* // Returns 4.0, not 2.0
* var d = Cesium.Cartesian2.distance(new Cesium.Cartesian2(1.0, 0.0), new Cesium.Cartesian2(3.0, 0.0));
*/
Cartesian2.distanceSquared = function(left, right) {
if (!defined(left) || !defined(right)) {
throw new DeveloperError('left and right are required.');
}
Cartesian2.subtract(left, right, distanceScratch);
return Cartesian2.magnitudeSquared(distanceScratch);
};
/**
* Computes the normalized form of the supplied Cartesian.
*
* @param {Cartesian2} cartesian The Cartesian to be normalized.
* @param {Cartesian2} result The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter.
*/
Cartesian2.normalize = function(cartesian, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
var magnitude = Cartesian2.magnitude(cartesian);
result.x = cartesian.x / magnitude;
result.y = cartesian.y / magnitude;
if (isNaN(result.x) || isNaN(result.y)) {
throw new DeveloperError('normalized result is not a number');
}
return result;
};
/**
* Computes the dot (scalar) product of two Cartesians.
*
* @param {Cartesian2} left The first Cartesian.
* @param {Cartesian2} right The second Cartesian.
* @returns {Number} The dot product.
*/
Cartesian2.dot = function(left, right) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
return left.x * right.x + left.y * right.y;
};
/**
* Computes the componentwise product of two Cartesians.
*
* @param {Cartesian2} left The first Cartesian.
* @param {Cartesian2} right The second Cartesian.
* @param {Cartesian2} result The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter.
*/
Cartesian2.multiplyComponents = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = left.x * right.x;
result.y = left.y * right.y;
return result;
};
/**
* Computes the componentwise quotient of two Cartesians.
*
* @param {Cartesian2} left The first Cartesian.
* @param {Cartesian2} right The second Cartesian.
* @param {Cartesian2} result The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter.
*/
Cartesian2.divideComponents = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = left.x / right.x;
result.y = left.y / right.y;
return result;
};
/**
* Computes the componentwise sum of two Cartesians.
*
* @param {Cartesian2} left The first Cartesian.
* @param {Cartesian2} right The second Cartesian.
* @param {Cartesian2} result The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter.
*/
Cartesian2.add = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = left.x + right.x;
result.y = left.y + right.y;
return result;
};
/**
* Computes the componentwise difference of two Cartesians.
*
* @param {Cartesian2} left The first Cartesian.
* @param {Cartesian2} right The second Cartesian.
* @param {Cartesian2} result The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter.
*/
Cartesian2.subtract = function(left, right, result) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = left.x - right.x;
result.y = left.y - right.y;
return result;
};
/**
* Multiplies the provided Cartesian componentwise by the provided scalar.
*
* @param {Cartesian2} cartesian The Cartesian to be scaled.
* @param {Number} scalar The scalar to multiply with.
* @param {Cartesian2} result The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter.
*/
Cartesian2.multiplyByScalar = function(cartesian, scalar, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (typeof scalar !== 'number') {
throw new DeveloperError('scalar is required and must be a number.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = cartesian.x * scalar;
result.y = cartesian.y * scalar;
return result;
};
/**
* Divides the provided Cartesian componentwise by the provided scalar.
*
* @param {Cartesian2} cartesian The Cartesian to be divided.
* @param {Number} scalar The scalar to divide by.
* @param {Cartesian2} result The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter.
*/
Cartesian2.divideByScalar = function(cartesian, scalar, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (typeof scalar !== 'number') {
throw new DeveloperError('scalar is required and must be a number.');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = cartesian.x / scalar;
result.y = cartesian.y / scalar;
return result;
};
/**
* Negates the provided Cartesian.
*
* @param {Cartesian2} cartesian The Cartesian to be negated.
* @param {Cartesian2} result The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter.
*/
Cartesian2.negate = function(cartesian, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = -cartesian.x;
result.y = -cartesian.y;
return result;
};
/**
* Computes the absolute value of the provided Cartesian.
*
* @param {Cartesian2} cartesian The Cartesian whose absolute value is to be computed.
* @param {Cartesian2} result The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter.
*/
Cartesian2.abs = function(cartesian, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required');
}
if (!defined(result)) {
throw new DeveloperError('result is required');
}
result.x = Math.abs(cartesian.x);
result.y = Math.abs(cartesian.y);
return result;
};
var lerpScratch = new Cartesian2();
/**
* Computes the linear interpolation or extrapolation at t using the provided cartesians.
*
* @param {Cartesian2} start The value corresponding to t at 0.0.
* @param {Cartesian2} end The value corresponding to t at 1.0.
* @param {Number} t The point along t at which to interpolate.
* @param {Cartesian2} result The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter.
*/
Cartesian2.lerp = function(start, end, t, result) {
if (!defined(start)) {
throw new DeveloperError('start is required.');
}
if (!defined(end)) {
throw new DeveloperError('end is required.');
}
if (typeof t !== 'number') {
throw new DeveloperError('t is required and must be a number.');
}
if (!defined(result)) {
throw new DeveloperError('result is required.');
}
Cartesian2.multiplyByScalar(end, t, lerpScratch);
result = Cartesian2.multiplyByScalar(start, 1.0 - t, result);
return Cartesian2.add(lerpScratch, result, result);
};
var angleBetweenScratch = new Cartesian2();
var angleBetweenScratch2 = new Cartesian2();
/**
* Returns the angle, in radians, between the provided Cartesians.
*
* @param {Cartesian2} left The first Cartesian.
* @param {Cartesian2} right The second Cartesian.
* @returns {Number} The angle between the Cartesians.
*/
Cartesian2.angleBetween = function(left, right) {
if (!defined(left)) {
throw new DeveloperError('left is required');
}
if (!defined(right)) {
throw new DeveloperError('right is required');
}
Cartesian2.normalize(left, angleBetweenScratch);
Cartesian2.normalize(right, angleBetweenScratch2);
return CesiumMath.acosClamped(Cartesian2.dot(angleBetweenScratch, angleBetweenScratch2));
};
var mostOrthogonalAxisScratch = new Cartesian2();
/**
* Returns the axis that is most orthogonal to the provided Cartesian.
*
* @param {Cartesian2} cartesian The Cartesian on which to find the most orthogonal axis.
* @param {Cartesian2} result The object onto which to store the result.
* @returns {Cartesian2} The most orthogonal axis.
*/
Cartesian2.mostOrthogonalAxis = function(cartesian, result) {
if (!defined(cartesian)) {
throw new DeveloperError('cartesian is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required.');
}
var f = Cartesian2.normalize(cartesian, mostOrthogonalAxisScratch);
Cartesian2.abs(f, f);
if (f.x <= f.y) {
result = Cartesian2.clone(Cartesian2.UNIT_X, result);
} else {
result = Cartesian2.clone(Cartesian2.UNIT_Y, result);
}
return result;
};
/**
* Compares the provided Cartesians componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Cartesian2} [left] The first Cartesian.
* @param {Cartesian2} [right] The second Cartesian.
* @returns {Boolean} true if left and right are equal, false otherwise.
*/
Cartesian2.equals = function(left, right) {
return (left === right) ||
((defined(left)) &&
(defined(right)) &&
(left.x === right.x) &&
(left.y === right.y));
};
/**
* @private
*/
Cartesian2.equalsArray = function(cartesian, array, offset) {
return cartesian.x === array[offset] &&
cartesian.y === array[offset + 1];
};
/**
* Compares the provided Cartesians componentwise and returns
* true if they pass an absolute or relative tolerance test,
* false otherwise.
*
* @param {Cartesian2} [left] The first Cartesian.
* @param {Cartesian2} [right] The second Cartesian.
* @param {Number} relativeEpsilon The relative epsilon tolerance to use for equality testing.
* @param {Number} [absoluteEpsilon=relativeEpsilon] The absolute epsilon tolerance to use for equality testing.
* @returns {Boolean} true if left and right are within the provided epsilon, false otherwise.
*/
Cartesian2.equalsEpsilon = function(left, right, relativeEpsilon, absoluteEpsilon) {
return (left === right) ||
(defined(left) &&
defined(right) &&
CesiumMath.equalsEpsilon(left.x, right.x, relativeEpsilon, absoluteEpsilon) &&
CesiumMath.equalsEpsilon(left.y, right.y, relativeEpsilon, absoluteEpsilon));
};
/**
* An immutable Cartesian2 instance initialized to (0.0, 0.0).
*
* @type {Cartesian2}
* @constant
*/
Cartesian2.ZERO = freezeObject(new Cartesian2(0.0, 0.0));
/**
* An immutable Cartesian2 instance initialized to (1.0, 0.0).
*
* @type {Cartesian2}
* @constant
*/
Cartesian2.UNIT_X = freezeObject(new Cartesian2(1.0, 0.0));
/**
* An immutable Cartesian2 instance initialized to (0.0, 1.0).
*
* @type {Cartesian2}
* @constant
*/
Cartesian2.UNIT_Y = freezeObject(new Cartesian2(0.0, 1.0));
/**
* Duplicates this Cartesian2 instance.
*
* @param {Cartesian2} [result] The object onto which to store the result.
* @returns {Cartesian2} The modified result parameter or a new Cartesian2 instance if one was not provided.
*/
Cartesian2.prototype.clone = function(result) {
return Cartesian2.clone(this, result);
};
/**
* Compares this Cartesian against the provided Cartesian componentwise and returns
* true if they are equal, false otherwise.
*
* @param {Cartesian2} [right] The right hand side Cartesian.
* @returns {Boolean} true if they are equal, false otherwise.
*/
Cartesian2.prototype.equals = function(right) {
return Cartesian2.equals(this, right);
};
/**
* Compares this Cartesian against the provided Cartesian componentwise and returns
* true if they pass an absolute or relative tolerance test,
* false otherwise.
*
* @param {Cartesian2} [right] The right hand side Cartesian.
* @param {Number} relativeEpsilon The relative epsilon tolerance to use for equality testing.
* @param {Number} [absoluteEpsilon=relativeEpsilon] The absolute epsilon tolerance to use for equality testing.
* @returns {Boolean} true if they are within the provided epsilon, false otherwise.
*/
Cartesian2.prototype.equalsEpsilon = function(right, relativeEpsilon, absoluteEpsilon) {
return Cartesian2.equalsEpsilon(this, right, relativeEpsilon, absoluteEpsilon);
};
/**
* Creates a string representing this Cartesian in the format '(x, y)'.
*
* @returns {String} A string representing the provided Cartesian in the format '(x, y)'.
*/
Cartesian2.prototype.toString = function() {
return '(' + this.x + ', ' + this.y + ')';
};
return Cartesian2;
});
/*global define*/
define('Core/QuadraticRealPolynomial',[
'./DeveloperError',
'./Math'
], function(
DeveloperError,
CesiumMath) {
'use strict';
/**
* Defines functions for 2nd order polynomial functions of one variable with only real coefficients.
*
* @exports QuadraticRealPolynomial
*/
var QuadraticRealPolynomial = {};
/**
* Provides the discriminant of the quadratic equation from the supplied coefficients.
*
* @param {Number} a The coefficient of the 2nd order monomial.
* @param {Number} b The coefficient of the 1st order monomial.
* @param {Number} c The coefficient of the 0th order monomial.
* @returns {Number} The value of the discriminant.
*/
QuadraticRealPolynomial.computeDiscriminant = function(a, b, c) {
if (typeof a !== 'number') {
throw new DeveloperError('a is a required number.');
}
if (typeof b !== 'number') {
throw new DeveloperError('b is a required number.');
}
if (typeof c !== 'number') {
throw new DeveloperError('c is a required number.');
}
var discriminant = b * b - 4.0 * a * c;
return discriminant;
};
function addWithCancellationCheck(left, right, tolerance) {
var difference = left + right;
if ((CesiumMath.sign(left) !== CesiumMath.sign(right)) &&
Math.abs(difference / Math.max(Math.abs(left), Math.abs(right))) < tolerance) {
return 0.0;
}
return difference;
}
/**
* Provides the real valued roots of the quadratic polynomial with the provided coefficients.
*
* @param {Number} a The coefficient of the 2nd order monomial.
* @param {Number} b The coefficient of the 1st order monomial.
* @param {Number} c The coefficient of the 0th order monomial.
* @returns {Number[]} The real valued roots.
*/
QuadraticRealPolynomial.computeRealRoots = function(a, b, c) {
if (typeof a !== 'number') {
throw new DeveloperError('a is a required number.');
}
if (typeof b !== 'number') {
throw new DeveloperError('b is a required number.');
}
if (typeof c !== 'number') {
throw new DeveloperError('c is a required number.');
}
var ratio;
if (a === 0.0) {
if (b === 0.0) {
// Constant function: c = 0.
return [];
}
// Linear function: b * x + c = 0.
return [-c / b];
} else if (b === 0.0) {
if (c === 0.0) {
// 2nd order monomial: a * x^2 = 0.
return [0.0, 0.0];
}
var cMagnitude = Math.abs(c);
var aMagnitude = Math.abs(a);
if ((cMagnitude < aMagnitude) && (cMagnitude / aMagnitude < CesiumMath.EPSILON14)) { // c ~= 0.0.
// 2nd order monomial: a * x^2 = 0.
return [0.0, 0.0];
} else if ((cMagnitude > aMagnitude) && (aMagnitude / cMagnitude < CesiumMath.EPSILON14)) { // a ~= 0.0.
// Constant function: c = 0.
return [];
}
// a * x^2 + c = 0
ratio = -c / a;
if (ratio < 0.0) {
// Both roots are complex.
return [];
}
// Both roots are real.
var root = Math.sqrt(ratio);
return [-root, root];
} else if (c === 0.0) {
// a * x^2 + b * x = 0
ratio = -b / a;
if (ratio < 0.0) {
return [ratio, 0.0];
}
return [0.0, ratio];
}
// a * x^2 + b * x + c = 0
var b2 = b * b;
var four_ac = 4.0 * a * c;
var radicand = addWithCancellationCheck(b2, -four_ac, CesiumMath.EPSILON14);
if (radicand < 0.0) {
// Both roots are complex.
return [];
}
var q = -0.5 * addWithCancellationCheck(b, CesiumMath.sign(b) * Math.sqrt(radicand), CesiumMath.EPSILON14);
if (b > 0.0) {
return [q / a, c / q];
}
return [c / q, q / a];
};
return QuadraticRealPolynomial;
});
/*global define*/
define('Core/CubicRealPolynomial',[
'./DeveloperError',
'./QuadraticRealPolynomial'
], function(
DeveloperError,
QuadraticRealPolynomial) {
'use strict';
/**
* Defines functions for 3rd order polynomial functions of one variable with only real coefficients.
*
* @exports CubicRealPolynomial
*/
var CubicRealPolynomial = {};
/**
* Provides the discriminant of the cubic equation from the supplied coefficients.
*
* @param {Number} a The coefficient of the 3rd order monomial.
* @param {Number} b The coefficient of the 2nd order monomial.
* @param {Number} c The coefficient of the 1st order monomial.
* @param {Number} d The coefficient of the 0th order monomial.
* @returns {Number} The value of the discriminant.
*/
CubicRealPolynomial.computeDiscriminant = function(a, b, c, d) {
if (typeof a !== 'number') {
throw new DeveloperError('a is a required number.');
}
if (typeof b !== 'number') {
throw new DeveloperError('b is a required number.');
}
if (typeof c !== 'number') {
throw new DeveloperError('c is a required number.');
}
if (typeof d !== 'number') {
throw new DeveloperError('d is a required number.');
}
var a2 = a * a;
var b2 = b * b;
var c2 = c * c;
var d2 = d * d;
var discriminant = 18.0 * a * b * c * d + b2 * c2 - 27.0 * a2 * d2 - 4.0 * (a * c2 * c + b2 * b * d);
return discriminant;
};
function computeRealRoots(a, b, c, d) {
var A = a;
var B = b / 3.0;
var C = c / 3.0;
var D = d;
var AC = A * C;
var BD = B * D;
var B2 = B * B;
var C2 = C * C;
var delta1 = A * C - B2;
var delta2 = A * D - B * C;
var delta3 = B * D - C2;
var discriminant = 4.0 * delta1 * delta3 - delta2 * delta2;
var temp;
var temp1;
if (discriminant < 0.0) {
var ABar;
var CBar;
var DBar;
if (B2 * BD >= AC * C2) {
ABar = A;
CBar = delta1;
DBar = -2.0 * B * delta1 + A * delta2;
} else {
ABar = D;
CBar = delta3;
DBar = -D * delta2 + 2.0 * C * delta3;
}
var s = (DBar < 0.0) ? -1.0 : 1.0; // This is not Math.Sign()!
var temp0 = -s * Math.abs(ABar) * Math.sqrt(-discriminant);
temp1 = -DBar + temp0;
var x = temp1 / 2.0;
var p = x < 0.0 ? -Math.pow(-x, 1.0 / 3.0) : Math.pow(x, 1.0 / 3.0);
var q = (temp1 === temp0) ? -p : -CBar / p;
temp = (CBar <= 0.0) ? p + q : -DBar / (p * p + q * q + CBar);
if (B2 * BD >= AC * C2) {
return [(temp - B) / A];
}
return [-D / (temp + C)];
}
var CBarA = delta1;
var DBarA = -2.0 * B * delta1 + A * delta2;
var CBarD = delta3;
var DBarD = -D * delta2 + 2.0 * C * delta3;
var squareRootOfDiscriminant = Math.sqrt(discriminant);
var halfSquareRootOf3 = Math.sqrt(3.0) / 2.0;
var theta = Math.abs(Math.atan2(A * squareRootOfDiscriminant, -DBarA) / 3.0);
temp = 2.0 * Math.sqrt(-CBarA);
var cosine = Math.cos(theta);
temp1 = temp * cosine;
var temp3 = temp * (-cosine / 2.0 - halfSquareRootOf3 * Math.sin(theta));
var numeratorLarge = (temp1 + temp3 > 2.0 * B) ? temp1 - B : temp3 - B;
var denominatorLarge = A;
var root1 = numeratorLarge / denominatorLarge;
theta = Math.abs(Math.atan2(D * squareRootOfDiscriminant, -DBarD) / 3.0);
temp = 2.0 * Math.sqrt(-CBarD);
cosine = Math.cos(theta);
temp1 = temp * cosine;
temp3 = temp * (-cosine / 2.0 - halfSquareRootOf3 * Math.sin(theta));
var numeratorSmall = -D;
var denominatorSmall = (temp1 + temp3 < 2.0 * C) ? temp1 + C : temp3 + C;
var root3 = numeratorSmall / denominatorSmall;
var E = denominatorLarge * denominatorSmall;
var F = -numeratorLarge * denominatorSmall - denominatorLarge * numeratorSmall;
var G = numeratorLarge * numeratorSmall;
var root2 = (C * F - B * G) / (-B * F + C * E);
if (root1 <= root2) {
if (root1 <= root3) {
if (root2 <= root3) {
return [root1, root2, root3];
}
return [root1, root3, root2];
}
return [root3, root1, root2];
}
if (root1 <= root3) {
return [root2, root1, root3];
}
if (root2 <= root3) {
return [root2, root3, root1];
}
return [root3, root2, root1];
}
/**
* Provides the real valued roots of the cubic polynomial with the provided coefficients.
*
* @param {Number} a The coefficient of the 3rd order monomial.
* @param {Number} b The coefficient of the 2nd order monomial.
* @param {Number} c The coefficient of the 1st order monomial.
* @param {Number} d The coefficient of the 0th order monomial.
* @returns {Number[]} The real valued roots.
*/
CubicRealPolynomial.computeRealRoots = function(a, b, c, d) {
if (typeof a !== 'number') {
throw new DeveloperError('a is a required number.');
}
if (typeof b !== 'number') {
throw new DeveloperError('b is a required number.');
}
if (typeof c !== 'number') {
throw new DeveloperError('c is a required number.');
}
if (typeof d !== 'number') {
throw new DeveloperError('d is a required number.');
}
var roots;
var ratio;
if (a === 0.0) {
// Quadratic function: b * x^2 + c * x + d = 0.
return QuadraticRealPolynomial.computeRealRoots(b, c, d);
} else if (b === 0.0) {
if (c === 0.0) {
if (d === 0.0) {
// 3rd order monomial: a * x^3 = 0.
return [0.0, 0.0, 0.0];
}
// a * x^3 + d = 0
ratio = -d / a;
var root = (ratio < 0.0) ? -Math.pow(-ratio, 1.0 / 3.0) : Math.pow(ratio, 1.0 / 3.0);
return [root, root, root];
} else if (d === 0.0) {
// x * (a * x^2 + c) = 0.
roots = QuadraticRealPolynomial.computeRealRoots(a, 0, c);
// Return the roots in ascending order.
if (roots.Length === 0) {
return [0.0];
}
return [roots[0], 0.0, roots[1]];
}
// Deflated cubic polynomial: a * x^3 + c * x + d= 0.
return computeRealRoots(a, 0, c, d);
} else if (c === 0.0) {
if (d === 0.0) {
// x^2 * (a * x + b) = 0.
ratio = -b / a;
if (ratio < 0.0) {
return [ratio, 0.0, 0.0];
}
return [0.0, 0.0, ratio];
}
// a * x^3 + b * x^2 + d = 0.
return computeRealRoots(a, b, 0, d);
} else if (d === 0.0) {
// x * (a * x^2 + b * x + c) = 0
roots = QuadraticRealPolynomial.computeRealRoots(a, b, c);
// Return the roots in ascending order.
if (roots.length === 0) {
return [0.0];
} else if (roots[1] <= 0.0) {
return [roots[0], roots[1], 0.0];
} else if (roots[0] >= 0.0) {
return [0.0, roots[0], roots[1]];
}
return [roots[0], 0.0, roots[1]];
}
return computeRealRoots(a, b, c, d);
};
return CubicRealPolynomial;
});
/*global define*/
define('Core/QuarticRealPolynomial',[
'./CubicRealPolynomial',
'./DeveloperError',
'./Math',
'./QuadraticRealPolynomial'
], function(
CubicRealPolynomial,
DeveloperError,
CesiumMath,
QuadraticRealPolynomial) {
'use strict';
/**
* Defines functions for 4th order polynomial functions of one variable with only real coefficients.
*
* @exports QuarticRealPolynomial
*/
var QuarticRealPolynomial = {};
/**
* Provides the discriminant of the quartic equation from the supplied coefficients.
*
* @param {Number} a The coefficient of the 4th order monomial.
* @param {Number} b The coefficient of the 3rd order monomial.
* @param {Number} c The coefficient of the 2nd order monomial.
* @param {Number} d The coefficient of the 1st order monomial.
* @param {Number} e The coefficient of the 0th order monomial.
* @returns {Number} The value of the discriminant.
*/
QuarticRealPolynomial.computeDiscriminant = function(a, b, c, d, e) {
if (typeof a !== 'number') {
throw new DeveloperError('a is a required number.');
}
if (typeof b !== 'number') {
throw new DeveloperError('b is a required number.');
}
if (typeof c !== 'number') {
throw new DeveloperError('c is a required number.');
}
if (typeof d !== 'number') {
throw new DeveloperError('d is a required number.');
}
if (typeof e !== 'number') {
throw new DeveloperError('e is a required number.');
}
var a2 = a * a;
var a3 = a2 * a;
var b2 = b * b;
var b3 = b2 * b;
var c2 = c * c;
var c3 = c2 * c;
var d2 = d * d;
var d3 = d2 * d;
var e2 = e * e;
var e3 = e2 * e;
var discriminant = (b2 * c2 * d2 - 4.0 * b3 * d3 - 4.0 * a * c3 * d2 + 18 * a * b * c * d3 - 27.0 * a2 * d2 * d2 + 256.0 * a3 * e3) +
e * (18.0 * b3 * c * d - 4.0 * b2 * c3 + 16.0 * a * c2 * c2 - 80.0 * a * b * c2 * d - 6.0 * a * b2 * d2 + 144.0 * a2 * c * d2) +
e2 * (144.0 * a * b2 * c - 27.0 * b2 * b2 - 128.0 * a2 * c2 - 192.0 * a2 * b * d);
return discriminant;
};
function original(a3, a2, a1, a0) {
var a3Squared = a3 * a3;
var p = a2 - 3.0 * a3Squared / 8.0;
var q = a1 - a2 * a3 / 2.0 + a3Squared * a3 / 8.0;
var r = a0 - a1 * a3 / 4.0 + a2 * a3Squared / 16.0 - 3.0 * a3Squared * a3Squared / 256.0;
// Find the roots of the cubic equations: h^6 + 2 p h^4 + (p^2 - 4 r) h^2 - q^2 = 0.
var cubicRoots = CubicRealPolynomial.computeRealRoots(1.0, 2.0 * p, p * p - 4.0 * r, -q * q);
if (cubicRoots.length > 0) {
var temp = -a3 / 4.0;
// Use the largest positive root.
var hSquared = cubicRoots[cubicRoots.length - 1];
if (Math.abs(hSquared) < CesiumMath.EPSILON14) {
// y^4 + p y^2 + r = 0.
var roots = QuadraticRealPolynomial.computeRealRoots(1.0, p, r);
if (roots.length === 2) {
var root0 = roots[0];
var root1 = roots[1];
var y;
if (root0 >= 0.0 && root1 >= 0.0) {
var y0 = Math.sqrt(root0);
var y1 = Math.sqrt(root1);
return [temp - y1, temp - y0, temp + y0, temp + y1];
} else if (root0 >= 0.0 && root1 < 0.0) {
y = Math.sqrt(root0);
return [temp - y, temp + y];
} else if (root0 < 0.0 && root1 >= 0.0) {
y = Math.sqrt(root1);
return [temp - y, temp + y];
}
}
return [];
} else if (hSquared > 0.0) {
var h = Math.sqrt(hSquared);
var m = (p + hSquared - q / h) / 2.0;
var n = (p + hSquared + q / h) / 2.0;
// Now solve the two quadratic factors: (y^2 + h y + m)(y^2 - h y + n);
var roots1 = QuadraticRealPolynomial.computeRealRoots(1.0, h, m);
var roots2 = QuadraticRealPolynomial.computeRealRoots(1.0, -h, n);
if (roots1.length !== 0) {
roots1[0] += temp;
roots1[1] += temp;
if (roots2.length !== 0) {
roots2[0] += temp;
roots2[1] += temp;
if (roots1[1] <= roots2[0]) {
return [roots1[0], roots1[1], roots2[0], roots2[1]];
} else if (roots2[1] <= roots1[0]) {
return [roots2[0], roots2[1], roots1[0], roots1[1]];
} else if (roots1[0] >= roots2[0] && roots1[1] <= roots2[1]) {
return [roots2[0], roots1[0], roots1[1], roots2[1]];
} else if (roots2[0] >= roots1[0] && roots2[1] <= roots1[1]) {
return [roots1[0], roots2[0], roots2[1], roots1[1]];
} else if (roots1[0] > roots2[0] && roots1[0] < roots2[1]) {
return [roots2[0], roots1[0], roots2[1], roots1[1]];
}
return [roots1[0], roots2[0], roots1[1], roots2[1]];
}
return roots1;
}
if (roots2.length !== 0) {
roots2[0] += temp;
roots2[1] += temp;
return roots2;
}
return [];
}
}
return [];
}
function neumark(a3, a2, a1, a0) {
var a1Squared = a1 * a1;
var a2Squared = a2 * a2;
var a3Squared = a3 * a3;
var p = -2.0 * a2;
var q = a1 * a3 + a2Squared - 4.0 * a0;
var r = a3Squared * a0 - a1 * a2 * a3 + a1Squared;
var cubicRoots = CubicRealPolynomial.computeRealRoots(1.0, p, q, r);
if (cubicRoots.length > 0) {
// Use the most positive root
var y = cubicRoots[0];
var temp = (a2 - y);
var tempSquared = temp * temp;
var g1 = a3 / 2.0;
var h1 = temp / 2.0;
var m = tempSquared - 4.0 * a0;
var mError = tempSquared + 4.0 * Math.abs(a0);
var n = a3Squared - 4.0 * y;
var nError = a3Squared + 4.0 * Math.abs(y);
var g2;
var h2;
if (y < 0.0 || (m * nError < n * mError)) {
var squareRootOfN = Math.sqrt(n);
g2 = squareRootOfN / 2.0;
h2 = squareRootOfN === 0.0 ? 0.0 : (a3 * h1 - a1) / squareRootOfN;
} else {
var squareRootOfM = Math.sqrt(m);
g2 = squareRootOfM === 0.0 ? 0.0 : (a3 * h1 - a1) / squareRootOfM;
h2 = squareRootOfM / 2.0;
}
var G;
var g;
if (g1 === 0.0 && g2 === 0.0) {
G = 0.0;
g = 0.0;
} else if (CesiumMath.sign(g1) === CesiumMath.sign(g2)) {
G = g1 + g2;
g = y / G;
} else {
g = g1 - g2;
G = y / g;
}
var H;
var h;
if (h1 === 0.0 && h2 === 0.0) {
H = 0.0;
h = 0.0;
} else if (CesiumMath.sign(h1) === CesiumMath.sign(h2)) {
H = h1 + h2;
h = a0 / H;
} else {
h = h1 - h2;
H = a0 / h;
}
// Now solve the two quadratic factors: (y^2 + G y + H)(y^2 + g y + h);
var roots1 = QuadraticRealPolynomial.computeRealRoots(1.0, G, H);
var roots2 = QuadraticRealPolynomial.computeRealRoots(1.0, g, h);
if (roots1.length !== 0) {
if (roots2.length !== 0) {
if (roots1[1] <= roots2[0]) {
return [roots1[0], roots1[1], roots2[0], roots2[1]];
} else if (roots2[1] <= roots1[0]) {
return [roots2[0], roots2[1], roots1[0], roots1[1]];
} else if (roots1[0] >= roots2[0] && roots1[1] <= roots2[1]) {
return [roots2[0], roots1[0], roots1[1], roots2[1]];
} else if (roots2[0] >= roots1[0] && roots2[1] <= roots1[1]) {
return [roots1[0], roots2[0], roots2[1], roots1[1]];
} else if (roots1[0] > roots2[0] && roots1[0] < roots2[1]) {
return [roots2[0], roots1[0], roots2[1], roots1[1]];
} else {
return [roots1[0], roots2[0], roots1[1], roots2[1]];
}
}
return roots1;
}
if (roots2.length !== 0) {
return roots2;
}
}
return [];
}
/**
* Provides the real valued roots of the quartic polynomial with the provided coefficients.
*
* @param {Number} a The coefficient of the 4th order monomial.
* @param {Number} b The coefficient of the 3rd order monomial.
* @param {Number} c The coefficient of the 2nd order monomial.
* @param {Number} d The coefficient of the 1st order monomial.
* @param {Number} e The coefficient of the 0th order monomial.
* @returns {Number[]} The real valued roots.
*/
QuarticRealPolynomial.computeRealRoots = function(a, b, c, d, e) {
if (typeof a !== 'number') {
throw new DeveloperError('a is a required number.');
}
if (typeof b !== 'number') {
throw new DeveloperError('b is a required number.');
}
if (typeof c !== 'number') {
throw new DeveloperError('c is a required number.');
}
if (typeof d !== 'number') {
throw new DeveloperError('d is a required number.');
}
if (typeof e !== 'number') {
throw new DeveloperError('e is a required number.');
}
if (Math.abs(a) < CesiumMath.EPSILON15) {
return CubicRealPolynomial.computeRealRoots(b, c, d, e);
}
var a3 = b / a;
var a2 = c / a;
var a1 = d / a;
var a0 = e / a;
var k = (a3 < 0.0) ? 1 : 0;
k += (a2 < 0.0) ? k + 1 : k;
k += (a1 < 0.0) ? k + 1 : k;
k += (a0 < 0.0) ? k + 1 : k;
switch (k) {
case 0:
return original(a3, a2, a1, a0);
case 1:
return neumark(a3, a2, a1, a0);
case 2:
return neumark(a3, a2, a1, a0);
case 3:
return original(a3, a2, a1, a0);
case 4:
return original(a3, a2, a1, a0);
case 5:
return neumark(a3, a2, a1, a0);
case 6:
return original(a3, a2, a1, a0);
case 7:
return original(a3, a2, a1, a0);
case 8:
return neumark(a3, a2, a1, a0);
case 9:
return original(a3, a2, a1, a0);
case 10:
return original(a3, a2, a1, a0);
case 11:
return neumark(a3, a2, a1, a0);
case 12:
return original(a3, a2, a1, a0);
case 13:
return original(a3, a2, a1, a0);
case 14:
return original(a3, a2, a1, a0);
case 15:
return original(a3, a2, a1, a0);
default:
return undefined;
}
};
return QuarticRealPolynomial;
});
/*global define*/
define('Core/Ray',[
'./Cartesian3',
'./defaultValue',
'./defined',
'./DeveloperError'
], function(
Cartesian3,
defaultValue,
defined,
DeveloperError) {
'use strict';
/**
* Represents a ray that extends infinitely from the provided origin in the provided direction.
* @alias Ray
* @constructor
*
* @param {Cartesian3} [origin=Cartesian3.ZERO] The origin of the ray.
* @param {Cartesian3} [direction=Cartesian3.ZERO] The direction of the ray.
*/
function Ray(origin, direction) {
direction = Cartesian3.clone(defaultValue(direction, Cartesian3.ZERO));
if (!Cartesian3.equals(direction, Cartesian3.ZERO)) {
Cartesian3.normalize(direction, direction);
}
/**
* The origin of the ray.
* @type {Cartesian3}
* @default {@link Cartesian3.ZERO}
*/
this.origin = Cartesian3.clone(defaultValue(origin, Cartesian3.ZERO));
/**
* The direction of the ray.
* @type {Cartesian3}
*/
this.direction = direction;
}
/**
* Computes the point along the ray given by r(t) = o + t*d,
* where o is the origin of the ray and d is the direction.
*
* @param {Ray} ray The ray.
* @param {Number} t A scalar value.
* @param {Cartesian3} [result] The object in which the result will be stored.
* @returns {Cartesian3} The modified result parameter, or a new instance if none was provided.
*
* @example
* //Get the first intersection point of a ray and an ellipsoid.
* var intersection = Cesium.IntersectionTests.rayEllipsoid(ray, ellipsoid);
* var point = Cesium.Ray.getPoint(ray, intersection.start);
*/
Ray.getPoint = function(ray, t, result) {
if (!defined(ray)){
throw new DeveloperError('ray is requred');
}
if (typeof t !== 'number') {
throw new DeveloperError('t is a required number');
}
if (!defined(result)) {
result = new Cartesian3();
}
result = Cartesian3.multiplyByScalar(ray.direction, t, result);
return Cartesian3.add(ray.origin, result, result);
};
return Ray;
});
/*global define*/
define('Core/IntersectionTests',[
'./Cartesian3',
'./Cartographic',
'./defaultValue',
'./defined',
'./DeveloperError',
'./Math',
'./Matrix3',
'./QuadraticRealPolynomial',
'./QuarticRealPolynomial',
'./Ray'
], function(
Cartesian3,
Cartographic,
defaultValue,
defined,
DeveloperError,
CesiumMath,
Matrix3,
QuadraticRealPolynomial,
QuarticRealPolynomial,
Ray) {
'use strict';
/**
* Functions for computing the intersection between geometries such as rays, planes, triangles, and ellipsoids.
*
* @exports IntersectionTests
*/
var IntersectionTests = {};
/**
* Computes the intersection of a ray and a plane.
*
* @param {Ray} ray The ray.
* @param {Plane} plane The plane.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The intersection point or undefined if there is no intersections.
*/
IntersectionTests.rayPlane = function(ray, plane, result) {
if (!defined(ray)) {
throw new DeveloperError('ray is required.');
}
if (!defined(plane)) {
throw new DeveloperError('plane is required.');
}
if (!defined(result)) {
result = new Cartesian3();
}
var origin = ray.origin;
var direction = ray.direction;
var normal = plane.normal;
var denominator = Cartesian3.dot(normal, direction);
if (Math.abs(denominator) < CesiumMath.EPSILON15) {
// Ray is parallel to plane. The ray may be in the polygon's plane.
return undefined;
}
var t = (-plane.distance - Cartesian3.dot(normal, origin)) / denominator;
if (t < 0) {
return undefined;
}
result = Cartesian3.multiplyByScalar(direction, t, result);
return Cartesian3.add(origin, result, result);
};
var scratchEdge0 = new Cartesian3();
var scratchEdge1 = new Cartesian3();
var scratchPVec = new Cartesian3();
var scratchTVec = new Cartesian3();
var scratchQVec = new Cartesian3();
/**
* Computes the intersection of a ray and a triangle as a parametric distance along the input ray.
*
* Implements {@link https://cadxfem.org/inf/Fast%20MinimumStorage%20RayTriangle%20Intersection.pdf|
* Fast Minimum Storage Ray/Triangle Intersection} by Tomas Moller and Ben Trumbore.
*
* @memberof IntersectionTests
*
* @param {Ray} ray The ray.
* @param {Cartesian3} p0 The first vertex of the triangle.
* @param {Cartesian3} p1 The second vertex of the triangle.
* @param {Cartesian3} p2 The third vertex of the triangle.
* @param {Boolean} [cullBackFaces=false] If true, will only compute an intersection with the front face of the triangle
* and return undefined for intersections with the back face.
* @returns {Number} The intersection as a parametric distance along the ray, or undefined if there is no intersection.
*/
IntersectionTests.rayTriangleParametric = function(ray, p0, p1, p2, cullBackFaces) {
if (!defined(ray)) {
throw new DeveloperError('ray is required.');
}
if (!defined(p0)) {
throw new DeveloperError('p0 is required.');
}
if (!defined(p1)) {
throw new DeveloperError('p1 is required.');
}
if (!defined(p2)) {
throw new DeveloperError('p2 is required.');
}
cullBackFaces = defaultValue(cullBackFaces, false);
var origin = ray.origin;
var direction = ray.direction;
var edge0 = Cartesian3.subtract(p1, p0, scratchEdge0);
var edge1 = Cartesian3.subtract(p2, p0, scratchEdge1);
var p = Cartesian3.cross(direction, edge1, scratchPVec);
var det = Cartesian3.dot(edge0, p);
var tvec;
var q;
var u;
var v;
var t;
if (cullBackFaces) {
if (det < CesiumMath.EPSILON6) {
return undefined;
}
tvec = Cartesian3.subtract(origin, p0, scratchTVec);
u = Cartesian3.dot(tvec, p);
if (u < 0.0 || u > det) {
return undefined;
}
q = Cartesian3.cross(tvec, edge0, scratchQVec);
v = Cartesian3.dot(direction, q);
if (v < 0.0 || u + v > det) {
return undefined;
}
t = Cartesian3.dot(edge1, q) / det;
} else {
if (Math.abs(det) < CesiumMath.EPSILON6) {
return undefined;
}
var invDet = 1.0 / det;
tvec = Cartesian3.subtract(origin, p0, scratchTVec);
u = Cartesian3.dot(tvec, p) * invDet;
if (u < 0.0 || u > 1.0) {
return undefined;
}
q = Cartesian3.cross(tvec, edge0, scratchQVec);
v = Cartesian3.dot(direction, q) * invDet;
if (v < 0.0 || u + v > 1.0) {
return undefined;
}
t = Cartesian3.dot(edge1, q) * invDet;
}
return t;
};
/**
* Computes the intersection of a ray and a triangle as a Cartesian3 coordinate.
*
* Implements {@link https://cadxfem.org/inf/Fast%20MinimumStorage%20RayTriangle%20Intersection.pdf|
* Fast Minimum Storage Ray/Triangle Intersection} by Tomas Moller and Ben Trumbore.
*
* @memberof IntersectionTests
*
* @param {Ray} ray The ray.
* @param {Cartesian3} p0 The first vertex of the triangle.
* @param {Cartesian3} p1 The second vertex of the triangle.
* @param {Cartesian3} p2 The third vertex of the triangle.
* @param {Boolean} [cullBackFaces=false] If true, will only compute an intersection with the front face of the triangle
* and return undefined for intersections with the back face.
* @param {Cartesian3} [result] The Cartesian3 onto which to store the result.
* @returns {Cartesian3} The intersection point or undefined if there is no intersections.
*/
IntersectionTests.rayTriangle = function(ray, p0, p1, p2, cullBackFaces, result) {
var t = IntersectionTests.rayTriangleParametric(ray, p0, p1, p2, cullBackFaces);
if (!defined(t) || t < 0.0) {
return undefined;
}
if (!defined(result)) {
result = new Cartesian3();
}
Cartesian3.multiplyByScalar(ray.direction, t, result);
return Cartesian3.add(ray.origin, result, result);
};
var scratchLineSegmentTriangleRay = new Ray();
/**
* Computes the intersection of a line segment and a triangle.
* @memberof IntersectionTests
*
* @param {Cartesian3} v0 The an end point of the line segment.
* @param {Cartesian3} v1 The other end point of the line segment.
* @param {Cartesian3} p0 The first vertex of the triangle.
* @param {Cartesian3} p1 The second vertex of the triangle.
* @param {Cartesian3} p2 The third vertex of the triangle.
* @param {Boolean} [cullBackFaces=false] If true, will only compute an intersection with the front face of the triangle
* and return undefined for intersections with the back face.
* @param {Cartesian3} [result] The Cartesian3 onto which to store the result.
* @returns {Cartesian3} The intersection point or undefined if there is no intersections.
*/
IntersectionTests.lineSegmentTriangle = function(v0, v1, p0, p1, p2, cullBackFaces, result) {
if (!defined(v0)) {
throw new DeveloperError('v0 is required.');
}
if (!defined(v1)) {
throw new DeveloperError('v1 is required.');
}
if (!defined(p0)) {
throw new DeveloperError('p0 is required.');
}
if (!defined(p1)) {
throw new DeveloperError('p1 is required.');
}
if (!defined(p2)) {
throw new DeveloperError('p2 is required.');
}
var ray = scratchLineSegmentTriangleRay;
Cartesian3.clone(v0, ray.origin);
Cartesian3.subtract(v1, v0, ray.direction);
Cartesian3.normalize(ray.direction, ray.direction);
var t = IntersectionTests.rayTriangleParametric(ray, p0, p1, p2, cullBackFaces);
if (!defined(t) || t < 0.0 || t > Cartesian3.distance(v0, v1)) {
return undefined;
}
if (!defined(result)) {
result = new Cartesian3();
}
Cartesian3.multiplyByScalar(ray.direction, t, result);
return Cartesian3.add(ray.origin, result, result);
};
function solveQuadratic(a, b, c, result) {
var det = b * b - 4.0 * a * c;
if (det < 0.0) {
return undefined;
} else if (det > 0.0) {
var denom = 1.0 / (2.0 * a);
var disc = Math.sqrt(det);
var root0 = (-b + disc) * denom;
var root1 = (-b - disc) * denom;
if (root0 < root1) {
result.root0 = root0;
result.root1 = root1;
} else {
result.root0 = root1;
result.root1 = root0;
}
return result;
}
var root = -b / (2.0 * a);
if (root === 0.0) {
return undefined;
}
result.root0 = result.root1 = root;
return result;
}
var raySphereRoots = {
root0 : 0.0,
root1 : 0.0
};
function raySphere(ray, sphere, result) {
if (!defined(result)) {
result = {};
}
var origin = ray.origin;
var direction = ray.direction;
var center = sphere.center;
var radiusSquared = sphere.radius * sphere.radius;
var diff = Cartesian3.subtract(origin, center, scratchPVec);
var a = Cartesian3.dot(direction, direction);
var b = 2.0 * Cartesian3.dot(direction, diff);
var c = Cartesian3.magnitudeSquared(diff) - radiusSquared;
var roots = solveQuadratic(a, b, c, raySphereRoots);
if (!defined(roots)) {
return undefined;
}
result.start = roots.root0;
result.stop = roots.root1;
return result;
}
/**
* Computes the intersection points of a ray with a sphere.
* @memberof IntersectionTests
*
* @param {Ray} ray The ray.
* @param {BoundingSphere} sphere The sphere.
* @param {Object} [result] The result onto which to store the result.
* @returns {Object} An object with the first (start) and the second (stop) intersection scalars for points along the ray or undefined if there are no intersections.
*/
IntersectionTests.raySphere = function(ray, sphere, result) {
if (!defined(ray)) {
throw new DeveloperError('ray is required.');
}
if (!defined(sphere)) {
throw new DeveloperError('sphere is required.');
}
result = raySphere(ray, sphere, result);
if (!defined(result) || result.stop < 0.0) {
return undefined;
}
result.start = Math.max(result.start, 0.0);
return result;
};
var scratchLineSegmentRay = new Ray();
/**
* Computes the intersection points of a line segment with a sphere.
* @memberof IntersectionTests
*
* @param {Cartesian3} p0 An end point of the line segment.
* @param {Cartesian3} p1 The other end point of the line segment.
* @param {BoundingSphere} sphere The sphere.
* @param {Object} [result] The result onto which to store the result.
* @returns {Object} An object with the first (start) and the second (stop) intersection scalars for points along the line segment or undefined if there are no intersections.
*/
IntersectionTests.lineSegmentSphere = function(p0, p1, sphere, result) {
if (!defined(p0)) {
throw new DeveloperError('p0 is required.');
}
if (!defined(p1)) {
throw new DeveloperError('p1 is required.');
}
if (!defined(sphere)) {
throw new DeveloperError('sphere is required.');
}
var ray = scratchLineSegmentRay;
Cartesian3.clone(p0, ray.origin);
var direction = Cartesian3.subtract(p1, p0, ray.direction);
var maxT = Cartesian3.magnitude(direction);
Cartesian3.normalize(direction, direction);
result = raySphere(ray, sphere, result);
if (!defined(result) || result.stop < 0.0 || result.start > maxT) {
return undefined;
}
result.start = Math.max(result.start, 0.0);
result.stop = Math.min(result.stop, maxT);
return result;
};
var scratchQ = new Cartesian3();
var scratchW = new Cartesian3();
/**
* Computes the intersection points of a ray with an ellipsoid.
*
* @param {Ray} ray The ray.
* @param {Ellipsoid} ellipsoid The ellipsoid.
* @returns {Object} An object with the first (start) and the second (stop) intersection scalars for points along the ray or undefined if there are no intersections.
*/
IntersectionTests.rayEllipsoid = function(ray, ellipsoid) {
if (!defined(ray)) {
throw new DeveloperError('ray is required.');
}
if (!defined(ellipsoid)) {
throw new DeveloperError('ellipsoid is required.');
}
var inverseRadii = ellipsoid.oneOverRadii;
var q = Cartesian3.multiplyComponents(inverseRadii, ray.origin, scratchQ);
var w = Cartesian3.multiplyComponents(inverseRadii, ray.direction, scratchW);
var q2 = Cartesian3.magnitudeSquared(q);
var qw = Cartesian3.dot(q, w);
var difference, w2, product, discriminant, temp;
if (q2 > 1.0) {
// Outside ellipsoid.
if (qw >= 0.0) {
// Looking outward or tangent (0 intersections).
return undefined;
}
// qw < 0.0.
var qw2 = qw * qw;
difference = q2 - 1.0; // Positively valued.
w2 = Cartesian3.magnitudeSquared(w);
product = w2 * difference;
if (qw2 < product) {
// Imaginary roots (0 intersections).
return undefined;
} else if (qw2 > product) {
// Distinct roots (2 intersections).
discriminant = qw * qw - product;
temp = -qw + Math.sqrt(discriminant); // Avoid cancellation.
var root0 = temp / w2;
var root1 = difference / temp;
if (root0 < root1) {
return {
start : root0,
stop : root1
};
}
return {
start : root1,
stop : root0
};
} else {
// qw2 == product. Repeated roots (2 intersections).
var root = Math.sqrt(difference / w2);
return {
start : root,
stop : root
};
}
} else if (q2 < 1.0) {
// Inside ellipsoid (2 intersections).
difference = q2 - 1.0; // Negatively valued.
w2 = Cartesian3.magnitudeSquared(w);
product = w2 * difference; // Negatively valued.
discriminant = qw * qw - product;
temp = -qw + Math.sqrt(discriminant); // Positively valued.
return {
start : 0.0,
stop : temp / w2
};
} else {
// q2 == 1.0. On ellipsoid.
if (qw < 0.0) {
// Looking inward.
w2 = Cartesian3.magnitudeSquared(w);
return {
start : 0.0,
stop : -qw / w2
};
}
// qw >= 0.0. Looking outward or tangent.
return undefined;
}
};
function addWithCancellationCheck(left, right, tolerance) {
var difference = left + right;
if ((CesiumMath.sign(left) !== CesiumMath.sign(right)) &&
Math.abs(difference / Math.max(Math.abs(left), Math.abs(right))) < tolerance) {
return 0.0;
}
return difference;
}
function quadraticVectorExpression(A, b, c, x, w) {
var xSquared = x * x;
var wSquared = w * w;
var l2 = (A[Matrix3.COLUMN1ROW1] - A[Matrix3.COLUMN2ROW2]) * wSquared;
var l1 = w * (x * addWithCancellationCheck(A[Matrix3.COLUMN1ROW0], A[Matrix3.COLUMN0ROW1], CesiumMath.EPSILON15) + b.y);
var l0 = (A[Matrix3.COLUMN0ROW0] * xSquared + A[Matrix3.COLUMN2ROW2] * wSquared) + x * b.x + c;
var r1 = wSquared * addWithCancellationCheck(A[Matrix3.COLUMN2ROW1], A[Matrix3.COLUMN1ROW2], CesiumMath.EPSILON15);
var r0 = w * (x * addWithCancellationCheck(A[Matrix3.COLUMN2ROW0], A[Matrix3.COLUMN0ROW2]) + b.z);
var cosines;
var solutions = [];
if (r0 === 0.0 && r1 === 0.0) {
cosines = QuadraticRealPolynomial.computeRealRoots(l2, l1, l0);
if (cosines.length === 0) {
return solutions;
}
var cosine0 = cosines[0];
var sine0 = Math.sqrt(Math.max(1.0 - cosine0 * cosine0, 0.0));
solutions.push(new Cartesian3(x, w * cosine0, w * -sine0));
solutions.push(new Cartesian3(x, w * cosine0, w * sine0));
if (cosines.length === 2) {
var cosine1 = cosines[1];
var sine1 = Math.sqrt(Math.max(1.0 - cosine1 * cosine1, 0.0));
solutions.push(new Cartesian3(x, w * cosine1, w * -sine1));
solutions.push(new Cartesian3(x, w * cosine1, w * sine1));
}
return solutions;
}
var r0Squared = r0 * r0;
var r1Squared = r1 * r1;
var l2Squared = l2 * l2;
var r0r1 = r0 * r1;
var c4 = l2Squared + r1Squared;
var c3 = 2.0 * (l1 * l2 + r0r1);
var c2 = 2.0 * l0 * l2 + l1 * l1 - r1Squared + r0Squared;
var c1 = 2.0 * (l0 * l1 - r0r1);
var c0 = l0 * l0 - r0Squared;
if (c4 === 0.0 && c3 === 0.0 && c2 === 0.0 && c1 === 0.0) {
return solutions;
}
cosines = QuarticRealPolynomial.computeRealRoots(c4, c3, c2, c1, c0);
var length = cosines.length;
if (length === 0) {
return solutions;
}
for ( var i = 0; i < length; ++i) {
var cosine = cosines[i];
var cosineSquared = cosine * cosine;
var sineSquared = Math.max(1.0 - cosineSquared, 0.0);
var sine = Math.sqrt(sineSquared);
//var left = l2 * cosineSquared + l1 * cosine + l0;
var left;
if (CesiumMath.sign(l2) === CesiumMath.sign(l0)) {
left = addWithCancellationCheck(l2 * cosineSquared + l0, l1 * cosine, CesiumMath.EPSILON12);
} else if (CesiumMath.sign(l0) === CesiumMath.sign(l1 * cosine)) {
left = addWithCancellationCheck(l2 * cosineSquared, l1 * cosine + l0, CesiumMath.EPSILON12);
} else {
left = addWithCancellationCheck(l2 * cosineSquared + l1 * cosine, l0, CesiumMath.EPSILON12);
}
var right = addWithCancellationCheck(r1 * cosine, r0, CesiumMath.EPSILON15);
var product = left * right;
if (product < 0.0) {
solutions.push(new Cartesian3(x, w * cosine, w * sine));
} else if (product > 0.0) {
solutions.push(new Cartesian3(x, w * cosine, w * -sine));
} else if (sine !== 0.0) {
solutions.push(new Cartesian3(x, w * cosine, w * -sine));
solutions.push(new Cartesian3(x, w * cosine, w * sine));
++i;
} else {
solutions.push(new Cartesian3(x, w * cosine, w * sine));
}
}
return solutions;
}
var firstAxisScratch = new Cartesian3();
var secondAxisScratch = new Cartesian3();
var thirdAxisScratch = new Cartesian3();
var referenceScratch = new Cartesian3();
var bCart = new Cartesian3();
var bScratch = new Matrix3();
var btScratch = new Matrix3();
var diScratch = new Matrix3();
var dScratch = new Matrix3();
var cScratch = new Matrix3();
var tempMatrix = new Matrix3();
var aScratch = new Matrix3();
var sScratch = new Cartesian3();
var closestScratch = new Cartesian3();
var surfPointScratch = new Cartographic();
/**
* Provides the point along the ray which is nearest to the ellipsoid.
*
* @param {Ray} ray The ray.
* @param {Ellipsoid} ellipsoid The ellipsoid.
* @returns {Cartesian3} The nearest planetodetic point on the ray.
*/
IntersectionTests.grazingAltitudeLocation = function(ray, ellipsoid) {
if (!defined(ray)) {
throw new DeveloperError('ray is required.');
}
if (!defined(ellipsoid)) {
throw new DeveloperError('ellipsoid is required.');
}
var position = ray.origin;
var direction = ray.direction;
if (!Cartesian3.equals(position, Cartesian3.ZERO)) {
var normal = ellipsoid.geodeticSurfaceNormal(position, firstAxisScratch);
if (Cartesian3.dot(direction, normal) >= 0.0) { // The location provided is the closest point in altitude
return position;
}
}
var intersects = defined(this.rayEllipsoid(ray, ellipsoid));
// Compute the scaled direction vector.
var f = ellipsoid.transformPositionToScaledSpace(direction, firstAxisScratch);
// Constructs a basis from the unit scaled direction vector. Construct its rotation and transpose.
var firstAxis = Cartesian3.normalize(f, f);
var reference = Cartesian3.mostOrthogonalAxis(f, referenceScratch);
var secondAxis = Cartesian3.normalize(Cartesian3.cross(reference, firstAxis, secondAxisScratch), secondAxisScratch);
var thirdAxis = Cartesian3.normalize(Cartesian3.cross(firstAxis, secondAxis, thirdAxisScratch), thirdAxisScratch);
var B = bScratch;
B[0] = firstAxis.x;
B[1] = firstAxis.y;
B[2] = firstAxis.z;
B[3] = secondAxis.x;
B[4] = secondAxis.y;
B[5] = secondAxis.z;
B[6] = thirdAxis.x;
B[7] = thirdAxis.y;
B[8] = thirdAxis.z;
var B_T = Matrix3.transpose(B, btScratch);
// Get the scaling matrix and its inverse.
var D_I = Matrix3.fromScale(ellipsoid.radii, diScratch);
var D = Matrix3.fromScale(ellipsoid.oneOverRadii, dScratch);
var C = cScratch;
C[0] = 0.0;
C[1] = -direction.z;
C[2] = direction.y;
C[3] = direction.z;
C[4] = 0.0;
C[5] = -direction.x;
C[6] = -direction.y;
C[7] = direction.x;
C[8] = 0.0;
var temp = Matrix3.multiply(Matrix3.multiply(B_T, D, tempMatrix), C, tempMatrix);
var A = Matrix3.multiply(Matrix3.multiply(temp, D_I, aScratch), B, aScratch);
var b = Matrix3.multiplyByVector(temp, position, bCart);
// Solve for the solutions to the expression in standard form:
var solutions = quadraticVectorExpression(A, Cartesian3.negate(b, firstAxisScratch), 0.0, 0.0, 1.0);
var s;
var altitude;
var length = solutions.length;
if (length > 0) {
var closest = Cartesian3.clone(Cartesian3.ZERO, closestScratch);
var maximumValue = Number.NEGATIVE_INFINITY;
for ( var i = 0; i < length; ++i) {
s = Matrix3.multiplyByVector(D_I, Matrix3.multiplyByVector(B, solutions[i], sScratch), sScratch);
var v = Cartesian3.normalize(Cartesian3.subtract(s, position, referenceScratch), referenceScratch);
var dotProduct = Cartesian3.dot(v, direction);
if (dotProduct > maximumValue) {
maximumValue = dotProduct;
closest = Cartesian3.clone(s, closest);
}
}
var surfacePoint = ellipsoid.cartesianToCartographic(closest, surfPointScratch);
maximumValue = CesiumMath.clamp(maximumValue, 0.0, 1.0);
altitude = Cartesian3.magnitude(Cartesian3.subtract(closest, position, referenceScratch)) * Math.sqrt(1.0 - maximumValue * maximumValue);
altitude = intersects ? -altitude : altitude;
surfacePoint.height = altitude;
return ellipsoid.cartographicToCartesian(surfacePoint, new Cartesian3());
}
return undefined;
};
var lineSegmentPlaneDifference = new Cartesian3();
/**
* Computes the intersection of a line segment and a plane.
*
* @param {Cartesian3} endPoint0 An end point of the line segment.
* @param {Cartesian3} endPoint1 The other end point of the line segment.
* @param {Plane} plane The plane.
* @param {Cartesian3} [result] The object onto which to store the result.
* @returns {Cartesian3} The intersection point or undefined if there is no intersection.
*
* @example
* var origin = Cesium.Cartesian3.fromDegrees(-75.59777, 40.03883);
* var normal = ellipsoid.geodeticSurfaceNormal(origin);
* var plane = Cesium.Plane.fromPointNormal(origin, normal);
*
* var p0 = new Cesium.Cartesian3(...);
* var p1 = new Cesium.Cartesian3(...);
*
* // find the intersection of the line segment from p0 to p1 and the tangent plane at origin.
* var intersection = Cesium.IntersectionTests.lineSegmentPlane(p0, p1, plane);
*/
IntersectionTests.lineSegmentPlane = function(endPoint0, endPoint1, plane, result) {
if (!defined(endPoint0)) {
throw new DeveloperError('endPoint0 is required.');
}
if (!defined(endPoint1)) {
throw new DeveloperError('endPoint1 is required.');
}
if (!defined(plane)) {
throw new DeveloperError('plane is required.');
}
if (!defined(result)) {
result = new Cartesian3();
}
var difference = Cartesian3.subtract(endPoint1, endPoint0, lineSegmentPlaneDifference);
var normal = plane.normal;
var nDotDiff = Cartesian3.dot(normal, difference);
// check if the segment and plane are parallel
if (Math.abs(nDotDiff) < CesiumMath.EPSILON6) {
return undefined;
}
var nDotP0 = Cartesian3.dot(normal, endPoint0);
var t = -(plane.distance + nDotP0) / nDotDiff;
// intersection only if t is in [0, 1]
if (t < 0.0 || t > 1.0) {
return undefined;
}
// intersection is endPoint0 + t * (endPoint1 - endPoint0)
Cartesian3.multiplyByScalar(difference, t, result);
Cartesian3.add(endPoint0, result, result);
return result;
};
/**
* Computes the intersection of a triangle and a plane
*
* @param {Cartesian3} p0 First point of the triangle
* @param {Cartesian3} p1 Second point of the triangle
* @param {Cartesian3} p2 Third point of the triangle
* @param {Plane} plane Intersection plane
* @returns {Object} An object with properties positions and indices, which are arrays that represent three triangles that do not cross the plane. (Undefined if no intersection exists)
*
* @example
* var origin = Cesium.Cartesian3.fromDegrees(-75.59777, 40.03883);
* var normal = ellipsoid.geodeticSurfaceNormal(origin);
* var plane = Cesium.Plane.fromPointNormal(origin, normal);
*
* var p0 = new Cesium.Cartesian3(...);
* var p1 = new Cesium.Cartesian3(...);
* var p2 = new Cesium.Cartesian3(...);
*
* // convert the triangle composed of points (p0, p1, p2) to three triangles that don't cross the plane
* var triangles = Cesium.IntersectionTests.trianglePlaneIntersection(p0, p1, p2, plane);
*/
IntersectionTests.trianglePlaneIntersection = function(p0, p1, p2, plane) {
if ((!defined(p0)) ||
(!defined(p1)) ||
(!defined(p2)) ||
(!defined(plane))) {
throw new DeveloperError('p0, p1, p2, and plane are required.');
}
var planeNormal = plane.normal;
var planeD = plane.distance;
var p0Behind = (Cartesian3.dot(planeNormal, p0) + planeD) < 0.0;
var p1Behind = (Cartesian3.dot(planeNormal, p1) + planeD) < 0.0;
var p2Behind = (Cartesian3.dot(planeNormal, p2) + planeD) < 0.0;
// Given these dots products, the calls to lineSegmentPlaneIntersection
// always have defined results.
var numBehind = 0;
numBehind += p0Behind ? 1 : 0;
numBehind += p1Behind ? 1 : 0;
numBehind += p2Behind ? 1 : 0;
var u1, u2;
if (numBehind === 1 || numBehind === 2) {
u1 = new Cartesian3();
u2 = new Cartesian3();
}
if (numBehind === 1) {
if (p0Behind) {
IntersectionTests.lineSegmentPlane(p0, p1, plane, u1);
IntersectionTests.lineSegmentPlane(p0, p2, plane, u2);
return {
positions : [p0, p1, p2, u1, u2 ],
indices : [
// Behind
0, 3, 4,
// In front
1, 2, 4,
1, 4, 3
]
};
} else if (p1Behind) {
IntersectionTests.lineSegmentPlane(p1, p2, plane, u1);
IntersectionTests.lineSegmentPlane(p1, p0, plane, u2);
return {
positions : [p0, p1, p2, u1, u2 ],
indices : [
// Behind
1, 3, 4,
// In front
2, 0, 4,
2, 4, 3
]
};
} else if (p2Behind) {
IntersectionTests.lineSegmentPlane(p2, p0, plane, u1);
IntersectionTests.lineSegmentPlane(p2, p1, plane, u2);
return {
positions : [p0, p1, p2, u1, u2 ],
indices : [
// Behind
2, 3, 4,
// In front
0, 1, 4,
0, 4, 3
]
};
}
} else if (numBehind === 2) {
if (!p0Behind) {
IntersectionTests.lineSegmentPlane(p1, p0, plane, u1);
IntersectionTests.lineSegmentPlane(p2, p0, plane, u2);
return {
positions : [p0, p1, p2, u1, u2 ],
indices : [
// Behind
1, 2, 4,
1, 4, 3,
// In front
0, 3, 4
]
};
} else if (!p1Behind) {
IntersectionTests.lineSegmentPlane(p2, p1, plane, u1);
IntersectionTests.lineSegmentPlane(p0, p1, plane, u2);
return {
positions : [p0, p1, p2, u1, u2 ],
indices : [
// Behind
2, 0, 4,
2, 4, 3,
// In front
1, 3, 4
]
};
} else if (!p2Behind) {
IntersectionTests.lineSegmentPlane(p0, p2, plane, u1);
IntersectionTests.lineSegmentPlane(p1, p2, plane, u2);
return {
positions : [p0, p1, p2, u1, u2 ],
indices : [
// Behind
0, 1, 4,
0, 4, 3,
// In front
2, 3, 4
]
};
}
}
// if numBehind is 3, the triangle is completely behind the plane;
// otherwise, it is completely in front (numBehind is 0).
return undefined;
};
return IntersectionTests;
});
/*global define*/
define('Core/Plane',[
'./Cartesian3',
'./defined',
'./DeveloperError',
'./freezeObject'
], function(
Cartesian3,
defined,
DeveloperError,
freezeObject) {
'use strict';
/**
* A plane in Hessian Normal Form defined by
*
* ax + by + cz + d = 0
*
* where (a, b, c) is the plane's normal, d is the signed
* distance to the plane, and (x, y, z) is any point on
* the plane.
*
* @alias Plane
* @constructor
*
* @param {Cartesian3} normal The plane's normal (normalized).
* @param {Number} distance The shortest distance from the origin to the plane. The sign of
* distance determines which side of the plane the origin
* is on. If distance is positive, the origin is in the half-space
* in the direction of the normal; if negative, the origin is in the half-space
* opposite to the normal; if zero, the plane passes through the origin.
*
* @example
* // The plane x=0
* var plane = new Cesium.Plane(Cesium.Cartesian3.UNIT_X, 0.0);
*/
function Plane(normal, distance) {
if (!defined(normal)) {
throw new DeveloperError('normal is required.');
}
if (!defined(distance)) {
throw new DeveloperError('distance is required.');
}
/**
* The plane's normal.
*
* @type {Cartesian3}
*/
this.normal = Cartesian3.clone(normal);
/**
* The shortest distance from the origin to the plane. The sign of
* distance determines which side of the plane the origin
* is on. If distance is positive, the origin is in the half-space
* in the direction of the normal; if negative, the origin is in the half-space
* opposite to the normal; if zero, the plane passes through the origin.
*
* @type {Number}
*/
this.distance = distance;
}
/**
* Creates a plane from a normal and a point on the plane.
*
* @param {Cartesian3} point The point on the plane.
* @param {Cartesian3} normal The plane's normal (normalized).
* @param {Plane} [result] The object onto which to store the result.
* @returns {Plane} A new plane instance or the modified result parameter.
*
* @example
* var point = Cesium.Cartesian3.fromDegrees(-72.0, 40.0);
* var normal = ellipsoid.geodeticSurfaceNormal(point);
* var tangentPlane = Cesium.Plane.fromPointNormal(point, normal);
*/
Plane.fromPointNormal = function(point, normal, result) {
if (!defined(point)) {
throw new DeveloperError('point is required.');
}
if (!defined(normal)) {
throw new DeveloperError('normal is required.');
}
var distance = -Cartesian3.dot(normal, point);
if (!defined(result)) {
return new Plane(normal, distance);
}
Cartesian3.clone(normal, result.normal);
result.distance = distance;
return result;
};
var scratchNormal = new Cartesian3();
/**
* Creates a plane from the general equation
*
* @param {Cartesian4} coefficients The plane's normal (normalized).
* @param {Plane} [result] The object onto which to store the result.
* @returns {Plane} A new plane instance or the modified result parameter.
*/
Plane.fromCartesian4 = function(coefficients, result) {
if (!defined(coefficients)) {
throw new DeveloperError('coefficients is required.');
}
var normal = Cartesian3.fromCartesian4(coefficients, scratchNormal);
var distance = coefficients.w;
if (!defined(result)) {
return new Plane(normal, distance);
} else {
Cartesian3.clone(normal, result.normal);
result.distance = distance;
return result;
}
};
/**
* Computes the signed shortest distance of a point to a plane.
* The sign of the distance determines which side of the plane the point
* is on. If the distance is positive, the point is in the half-space
* in the direction of the normal; if negative, the point is in the half-space
* opposite to the normal; if zero, the plane passes through the point.
*
* @param {Plane} plane The plane.
* @param {Cartesian3} point The point.
* @returns {Number} The signed shortest distance of the point to the plane.
*/
Plane.getPointDistance = function(plane, point) {
if (!defined(plane)) {
throw new DeveloperError('plane is required.');
}
if (!defined(point)) {
throw new DeveloperError('point is required.');
}
return Cartesian3.dot(plane.normal, point) + plane.distance;
};
/**
* A constant initialized to the XY plane passing through the origin, with normal in positive Z.
*
* @type {Plane}
* @constant
*/
Plane.ORIGIN_XY_PLANE = freezeObject(new Plane(Cartesian3.UNIT_Z, 0.0));
/**
* A constant initialized to the YZ plane passing through the origin, with normal in positive X.
*
* @type {Plane}
* @constant
*/
Plane.ORIGIN_YZ_PLANE = freezeObject(new Plane(Cartesian3.UNIT_X, 0.0));
/**
* A constant initialized to the ZX plane passing through the origin, with normal in positive Y.
*
* @type {Plane}
* @constant
*/
Plane.ORIGIN_ZX_PLANE = freezeObject(new Plane(Cartesian3.UNIT_Y, 0.0));
return Plane;
});
/**
@license
when.js - https://github.com/cujojs/when
MIT License (c) copyright B Cavalier & J Hann
* A lightweight CommonJS Promises/A and when() implementation
* when is part of the cujo.js family of libraries (http://cujojs.com/)
*
* Licensed under the MIT License at:
* http://www.opensource.org/licenses/mit-license.php
*
* @version 1.7.1
*/
(function(define) { 'use strict';
define('ThirdParty/when',[],function () {
var reduceArray, slice, undef;
//
// Public API
//
when.defer = defer; // Create a deferred
when.resolve = resolve; // Create a resolved promise
when.reject = reject; // Create a rejected promise
when.join = join; // Join 2 or more promises
when.all = all; // Resolve a list of promises
when.map = map; // Array.map() for promises
when.reduce = reduce; // Array.reduce() for promises
when.any = any; // One-winner race
when.some = some; // Multi-winner race
when.chain = chain; // Make a promise trigger another resolver
when.isPromise = isPromise; // Determine if a thing is a promise
/**
* Register an observer for a promise or immediate value.
*
* @param {*} promiseOrValue
* @param {function?} [onFulfilled] callback to be called when promiseOrValue is
* successfully fulfilled. If promiseOrValue is an immediate value, callback
* will be invoked immediately.
* @param {function?} [onRejected] callback to be called when promiseOrValue is
* rejected.
* @param {function?} [onProgress] callback to be called when progress updates
* are issued for promiseOrValue.
* @returns {Promise} a new {@link Promise} that will complete with the return
* value of callback or errback or the completion value of promiseOrValue if
* callback and/or errback is not supplied.
*/
function when(promiseOrValue, onFulfilled, onRejected, onProgress) {
// Get a trusted promise for the input promiseOrValue, and then
// register promise handlers
return resolve(promiseOrValue).then(onFulfilled, onRejected, onProgress);
}
/**
* Returns promiseOrValue if promiseOrValue is a {@link Promise}, a new Promise if
* promiseOrValue is a foreign promise, or a new, already-fulfilled {@link Promise}
* whose value is promiseOrValue if promiseOrValue is an immediate value.
*
* @param {*} promiseOrValue
* @returns Guaranteed to return a trusted Promise. If promiseOrValue is a when.js {@link Promise}
* returns promiseOrValue, otherwise, returns a new, already-resolved, when.js {@link Promise}
* whose resolution value is:
* * the resolution value of promiseOrValue if it's a foreign promise, or
* * promiseOrValue if it's a value
*/
function resolve(promiseOrValue) {
var promise, deferred;
if(promiseOrValue instanceof Promise) {
// It's a when.js promise, so we trust it
promise = promiseOrValue;
} else {
// It's not a when.js promise. See if it's a foreign promise or a value.
if(isPromise(promiseOrValue)) {
// It's a thenable, but we don't know where it came from, so don't trust
// its implementation entirely. Introduce a trusted middleman when.js promise
deferred = defer();
// IMPORTANT: This is the only place when.js should ever call .then() on an
// untrusted promise. Don't expose the return value to the untrusted promise
promiseOrValue.then(
function(value) { deferred.resolve(value); },
function(reason) { deferred.reject(reason); },
function(update) { deferred.progress(update); }
);
promise = deferred.promise;
} else {
// It's a value, not a promise. Create a resolved promise for it.
promise = fulfilled(promiseOrValue);
}
}
return promise;
}
/**
* Returns a rejected promise for the supplied promiseOrValue. The returned
* promise will be rejected with:
* - promiseOrValue, if it is a value, or
* - if promiseOrValue is a promise
* - promiseOrValue's value after it is fulfilled
* - promiseOrValue's reason after it is rejected
* @param {*} promiseOrValue the rejected value of the returned {@link Promise}
* @returns {Promise} rejected {@link Promise}
*/
function reject(promiseOrValue) {
return when(promiseOrValue, rejected);
}
/**
* Trusted Promise constructor. A Promise created from this constructor is
* a trusted when.js promise. Any other duck-typed promise is considered
* untrusted.
* @constructor
* @name Promise
*/
function Promise(then) {
this.then = then;
}
Promise.prototype = {
/**
* Register a callback that will be called when a promise is
* fulfilled or rejected. Optionally also register a progress handler.
* Shortcut for .then(onFulfilledOrRejected, onFulfilledOrRejected, onProgress)
* @param {function?} [onFulfilledOrRejected]
* @param {function?} [onProgress]
* @returns {Promise}
*/
always: function(onFulfilledOrRejected, onProgress) {
return this.then(onFulfilledOrRejected, onFulfilledOrRejected, onProgress);
},
/**
* Register a rejection handler. Shortcut for .then(undefined, onRejected)
* @param {function?} onRejected
* @returns {Promise}
*/
otherwise: function(onRejected) {
return this.then(undef, onRejected);
},
/**
* Shortcut for .then(function() { return value; })
* @param {*} value
* @returns {Promise} a promise that:
* - is fulfilled if value is not a promise, or
* - if value is a promise, will fulfill with its value, or reject
* with its reason.
*/
yield: function(value) {
return this.then(function() {
return value;
});
},
/**
* Assumes that this promise will fulfill with an array, and arranges
* for the onFulfilled to be called with the array as its argument list
* i.e. onFulfilled.spread(undefined, array).
* @param {function} onFulfilled function to receive spread arguments
* @returns {Promise}
*/
spread: function(onFulfilled) {
return this.then(function(array) {
// array may contain promises, so resolve its contents.
return all(array, function(array) {
return onFulfilled.apply(undef, array);
});
});
}
};
/**
* Create an already-resolved promise for the supplied value
* @private
*
* @param {*} value
* @returns {Promise} fulfilled promise
*/
function fulfilled(value) {
var p = new Promise(function(onFulfilled) {
// TODO: Promises/A+ check typeof onFulfilled
try {
return resolve(onFulfilled ? onFulfilled(value) : value);
} catch(e) {
return rejected(e);
}
});
return p;
}
/**
* Create an already-rejected {@link Promise} with the supplied
* rejection reason.
* @private
*
* @param {*} reason
* @returns {Promise} rejected promise
*/
function rejected(reason) {
var p = new Promise(function(_, onRejected) {
// TODO: Promises/A+ check typeof onRejected
try {
return onRejected ? resolve(onRejected(reason)) : rejected(reason);
} catch(e) {
return rejected(e);
}
});
return p;
}
/**
* Creates a new, Deferred with fully isolated resolver and promise parts,
* either or both of which may be given out safely to consumers.
* The Deferred itself has the full API: resolve, reject, progress, and
* then. The resolver has resolve, reject, and progress. The promise
* only has then.
*
* @returns {Deferred}
*/
function defer() {
var deferred, promise, handlers, progressHandlers,
_then, _progress, _resolve;
/**
* The promise for the new deferred
* @type {Promise}
*/
promise = new Promise(then);
/**
* The full Deferred object, with {@link Promise} and {@link Resolver} parts
* @class Deferred
* @name Deferred
*/
deferred = {
then: then, // DEPRECATED: use deferred.promise.then
resolve: promiseResolve,
reject: promiseReject,
// TODO: Consider renaming progress() to notify()
progress: promiseProgress,
promise: promise,
resolver: {
resolve: promiseResolve,
reject: promiseReject,
progress: promiseProgress
}
};
handlers = [];
progressHandlers = [];
/**
* Pre-resolution then() that adds the supplied callback, errback, and progback
* functions to the registered listeners
* @private
*
* @param {function?} [onFulfilled] resolution handler
* @param {function?} [onRejected] rejection handler
* @param {function?} [onProgress] progress handler
*/
_then = function(onFulfilled, onRejected, onProgress) {
// TODO: Promises/A+ check typeof onFulfilled, onRejected, onProgress
var deferred, progressHandler;
deferred = defer();
progressHandler = typeof onProgress === 'function'
? function(update) {
try {
// Allow progress handler to transform progress event
deferred.progress(onProgress(update));
} catch(e) {
// Use caught value as progress
deferred.progress(e);
}
}
: function(update) { deferred.progress(update); };
handlers.push(function(promise) {
promise.then(onFulfilled, onRejected)
.then(deferred.resolve, deferred.reject, progressHandler);
});
progressHandlers.push(progressHandler);
return deferred.promise;
};
/**
* Issue a progress event, notifying all progress listeners
* @private
* @param {*} update progress event payload to pass to all listeners
*/
_progress = function(update) {
processQueue(progressHandlers, update);
return update;
};
/**
* Transition from pre-resolution state to post-resolution state, notifying
* all listeners of the resolution or rejection
* @private
* @param {*} value the value of this deferred
*/
_resolve = function(value) {
value = resolve(value);
// Replace _then with one that directly notifies with the result.
_then = value.then;
// Replace _resolve so that this Deferred can only be resolved once
_resolve = resolve;
// Make _progress a noop, to disallow progress for the resolved promise.
_progress = noop;
// Notify handlers
processQueue(handlers, value);
// Free progressHandlers array since we'll never issue progress events
progressHandlers = handlers = undef;
return value;
};
return deferred;
/**
* Wrapper to allow _then to be replaced safely
* @param {function?} [onFulfilled] resolution handler
* @param {function?} [onRejected] rejection handler
* @param {function?} [onProgress] progress handler
* @returns {Promise} new promise
*/
function then(onFulfilled, onRejected, onProgress) {
// TODO: Promises/A+ check typeof onFulfilled, onRejected, onProgress
return _then(onFulfilled, onRejected, onProgress);
}
/**
* Wrapper to allow _resolve to be replaced
*/
function promiseResolve(val) {
return _resolve(val);
}
/**
* Wrapper to allow _reject to be replaced
*/
function promiseReject(err) {
return _resolve(rejected(err));
}
/**
* Wrapper to allow _progress to be replaced
*/
function promiseProgress(update) {
return _progress(update);
}
}
/**
* Determines if promiseOrValue is a promise or not. Uses the feature
* test from http://wiki.commonjs.org/wiki/Promises/A to determine if
* promiseOrValue is a promise.
*
* @param {*} promiseOrValue anything
* @returns {boolean} true if promiseOrValue is a {@link Promise}
*/
function isPromise(promiseOrValue) {
return promiseOrValue && typeof promiseOrValue.then === 'function';
}
/**
* Initiates a competitive race, returning a promise that will resolve when
* howMany of the supplied promisesOrValues have resolved, or will reject when
* it becomes impossible for howMany to resolve, for example, when
* (promisesOrValues.length - howMany) + 1 input promises reject.
*
* @param {Array} promisesOrValues array of anything, may contain a mix
* of promises and values
* @param howMany {number} number of promisesOrValues to resolve
* @param {function?} [onFulfilled] resolution handler
* @param {function?} [onRejected] rejection handler
* @param {function?} [onProgress] progress handler
* @returns {Promise} promise that will resolve to an array of howMany values that
* resolved first, or will reject with an array of (promisesOrValues.length - howMany) + 1
* rejection reasons.
*/
function some(promisesOrValues, howMany, onFulfilled, onRejected, onProgress) {
checkCallbacks(2, arguments);
return when(promisesOrValues, function(promisesOrValues) {
var toResolve, toReject, values, reasons, deferred, fulfillOne, rejectOne, progress, len, i;
len = promisesOrValues.length >>> 0;
toResolve = Math.max(0, Math.min(howMany, len));
values = [];
toReject = (len - toResolve) + 1;
reasons = [];
deferred = defer();
// No items in the input, resolve immediately
if (!toResolve) {
deferred.resolve(values);
} else {
progress = deferred.progress;
rejectOne = function(reason) {
reasons.push(reason);
if(!--toReject) {
fulfillOne = rejectOne = noop;
deferred.reject(reasons);
}
};
fulfillOne = function(val) {
// This orders the values based on promise resolution order
// Another strategy would be to use the original position of
// the corresponding promise.
values.push(val);
if (!--toResolve) {
fulfillOne = rejectOne = noop;
deferred.resolve(values);
}
};
for(i = 0; i < len; ++i) {
if(i in promisesOrValues) {
when(promisesOrValues[i], fulfiller, rejecter, progress);
}
}
}
return deferred.then(onFulfilled, onRejected, onProgress);
function rejecter(reason) {
rejectOne(reason);
}
function fulfiller(val) {
fulfillOne(val);
}
});
}
/**
* Initiates a competitive race, returning a promise that will resolve when
* any one of the supplied promisesOrValues has resolved or will reject when
* *all* promisesOrValues have rejected.
*
* @param {Array|Promise} promisesOrValues array of anything, may contain a mix
* of {@link Promise}s and values
* @param {function?} [onFulfilled] resolution handler
* @param {function?} [onRejected] rejection handler
* @param {function?} [onProgress] progress handler
* @returns {Promise} promise that will resolve to the value that resolved first, or
* will reject with an array of all rejected inputs.
*/
function any(promisesOrValues, onFulfilled, onRejected, onProgress) {
function unwrapSingleResult(val) {
return onFulfilled ? onFulfilled(val[0]) : val[0];
}
return some(promisesOrValues, 1, unwrapSingleResult, onRejected, onProgress);
}
/**
* Return a promise that will resolve only once all the supplied promisesOrValues
* have resolved. The resolution value of the returned promise will be an array
* containing the resolution values of each of the promisesOrValues.
* @memberOf when
*
* @param {Array|Promise} promisesOrValues array of anything, may contain a mix
* of {@link Promise}s and values
* @param {function?} [onFulfilled] resolution handler
* @param {function?} [onRejected] rejection handler
* @param {function?} [onProgress] progress handler
* @returns {Promise}
*/
function all(promisesOrValues, onFulfilled, onRejected, onProgress) {
checkCallbacks(1, arguments);
return map(promisesOrValues, identity).then(onFulfilled, onRejected, onProgress);
}
/**
* Joins multiple promises into a single returned promise.
* @returns {Promise} a promise that will fulfill when *all* the input promises
* have fulfilled, or will reject when *any one* of the input promises rejects.
*/
function join(/* ...promises */) {
return map(arguments, identity);
}
/**
* Traditional map function, similar to `Array.prototype.map()`, but allows
* input to contain {@link Promise}s and/or values, and mapFunc may return
* either a value or a {@link Promise}
*
* @param {Array|Promise} promise array of anything, may contain a mix
* of {@link Promise}s and values
* @param {function} mapFunc mapping function mapFunc(value) which may return
* either a {@link Promise} or value
* @returns {Promise} a {@link Promise} that will resolve to an array containing
* the mapped output values.
*/
function map(promise, mapFunc) {
return when(promise, function(array) {
var results, len, toResolve, resolve, i, d;
// Since we know the resulting length, we can preallocate the results
// array to avoid array expansions.
toResolve = len = array.length >>> 0;
results = [];
d = defer();
if(!toResolve) {
d.resolve(results);
} else {
resolve = function resolveOne(item, i) {
when(item, mapFunc).then(function(mapped) {
results[i] = mapped;
if(!--toResolve) {
d.resolve(results);
}
}, d.reject);
};
// Since mapFunc may be async, get all invocations of it into flight
for(i = 0; i < len; i++) {
if(i in array) {
resolve(array[i], i);
} else {
--toResolve;
}
}
}
return d.promise;
});
}
/**
* Traditional reduce function, similar to `Array.prototype.reduce()`, but
* input may contain promises and/or values, and reduceFunc
* may return either a value or a promise, *and* initialValue may
* be a promise for the starting value.
*
* @param {Array|Promise} promise array or promise for an array of anything,
* may contain a mix of promises and values.
* @param {function} reduceFunc reduce function reduce(currentValue, nextValue, index, total),
* where total is the total number of items being reduced, and will be the same
* in each call to reduceFunc.
* @returns {Promise} that will resolve to the final reduced value
*/
function reduce(promise, reduceFunc /*, initialValue */) {
var args = slice.call(arguments, 1);
return when(promise, function(array) {
var total;
total = array.length;
// Wrap the supplied reduceFunc with one that handles promises and then
// delegates to the supplied.
args[0] = function (current, val, i) {
return when(current, function (c) {
return when(val, function (value) {
return reduceFunc(c, value, i, total);
});
});
};
return reduceArray.apply(array, args);
});
}
/**
* Ensure that resolution of promiseOrValue will trigger resolver with the
* value or reason of promiseOrValue, or instead with resolveValue if it is provided.
*
* @param promiseOrValue
* @param {Object} resolver
* @param {function} resolver.resolve
* @param {function} resolver.reject
* @param {*} [resolveValue]
* @returns {Promise}
*/
function chain(promiseOrValue, resolver, resolveValue) {
var useResolveValue = arguments.length > 2;
return when(promiseOrValue,
function(val) {
val = useResolveValue ? resolveValue : val;
resolver.resolve(val);
return val;
},
function(reason) {
resolver.reject(reason);
return rejected(reason);
},
resolver.progress
);
}
//
// Utility functions
//
/**
* Apply all functions in queue to value
* @param {Array} queue array of functions to execute
* @param {*} value argument passed to each function
*/
function processQueue(queue, value) {
var handler, i = 0;
while (handler = queue[i++]) {
handler(value);
}
}
/**
* Helper that checks arrayOfCallbacks to ensure that each element is either
* a function, or null or undefined.
* @private
* @param {number} start index at which to start checking items in arrayOfCallbacks
* @param {Array} arrayOfCallbacks array to check
* @throws {Error} if any element of arrayOfCallbacks is something other than
* a functions, null, or undefined.
*/
function checkCallbacks(start, arrayOfCallbacks) {
// TODO: Promises/A+ update type checking and docs
var arg, i = arrayOfCallbacks.length;
while(i > start) {
arg = arrayOfCallbacks[--i];
if (arg != null && typeof arg != 'function') {
throw new Error('arg '+i+' must be a function');
}
}
}
/**
* No-Op function used in method replacement
* @private
*/
function noop() {}
slice = [].slice;
// ES5 reduce implementation if native not available
// See: http://es5.github.com/#x15.4.4.21 as there are many
// specifics and edge cases.
reduceArray = [].reduce ||
function(reduceFunc /*, initialValue */) {
/*jshint maxcomplexity: 7*/
// ES5 dictates that reduce.length === 1
// This implementation deviates from ES5 spec in the following ways:
// 1. It does not check if reduceFunc is a Callable
var arr, args, reduced, len, i;
i = 0;
// This generates a jshint warning, despite being valid
// "Missing 'new' prefix when invoking a constructor."
// See https://github.com/jshint/jshint/issues/392
arr = Object(this);
len = arr.length >>> 0;
args = arguments;
// If no initialValue, use first item of array (we know length !== 0 here)
// and adjust i to start at second item
if(args.length <= 1) {
// Skip to the first real element in the array
for(;;) {
if(i in arr) {
reduced = arr[i++];
break;
}
// If we reached the end of the array without finding any real
// elements, it's a TypeError
if(++i >= len) {
throw new TypeError();
}
}
} else {
// If initialValue provided, use it
reduced = args[1];
}
// Do the actual reduce
for(;i < len; ++i) {
// Skip holes
if(i in arr) {
reduced = reduceFunc(reduced, arr[i], i, arr);
}
}
return reduced;
};
function identity(x) {
return x;
}
return when;
});
})(typeof define == 'function' && define.amd
? define
: function (factory) { typeof exports === 'object'
? (module.exports = factory())
: (this.when = factory());
}
// Boilerplate for AMD, Node, and browser global
);
/*global define*/
define('Core/oneTimeWarning',[
'./defaultValue',
'./defined',
'./DeveloperError'
], function(
defaultValue,
defined,
DeveloperError) {
"use strict";
var warnings = {};
/**
* Logs a one time message to the console. Use this function instead of
* console.log directly since this does not log duplicate messages
* unless it is called from multiple workers.
*
* @exports oneTimeWarning
*
* @param {String} identifier The unique identifier for this warning.
* @param {String} [message=identifier] The message to log to the console.
*
* @example
* for(var i=0;iconsole.log itemToFind in the array, if it exists. If itemToFind
* does not exist, the return value is a negative number which is the bitwise complement (~)
* of the index before which the itemToFind should be inserted in order to maintain the
* sorted order of the array.
*
* @example
* // Create a comparator function to search through an array of numbers.
* function comparator(a, b) {
* return a - b;
* };
* var numbers = [0, 2, 4, 6, 8];
* var index = Cesium.binarySearch(numbers, 6, comparator); // 3
*/
function binarySearch(array, itemToFind, comparator) {
if (!defined(array)) {
throw new DeveloperError('array is required.');
}
if (!defined(itemToFind)) {
throw new DeveloperError('itemToFind is required.');
}
if (!defined(comparator)) {
throw new DeveloperError('comparator is required.');
}
var low = 0;
var high = array.length - 1;
var i;
var comparison;
while (low <= high) {
i = ~~((low + high) / 2);
comparison = comparator(array[i], itemToFind);
if (comparison < 0) {
low = i + 1;
continue;
}
if (comparison > 0) {
high = i - 1;
continue;
}
return i;
}
return ~(high + 1);
}
/**
* A function used to compare two items while performing a binary search.
* @callback binarySearch~Comparator
*
* @param {Object} a An item in the array.
* @param {Object} b The item being searched for.
* @returns {Number} Returns a negative value if a is less than b,
* a positive value if a is greater than b, or
* 0 if a is equal to b.
*
* @example
* function compareNumbers(a, b) {
* return a - b;
* }
*/
return binarySearch;
});
/*global define*/
define('Core/EarthOrientationParametersSample',[],function() {
'use strict';
/**
* A set of Earth Orientation Parameters (EOP) sampled at a time.
*
* @alias EarthOrientationParametersSample
* @constructor
*
* @param {Number} xPoleWander The pole wander about the X axis, in radians.
* @param {Number} yPoleWander The pole wander about the Y axis, in radians.
* @param {Number} xPoleOffset The offset to the Celestial Intermediate Pole (CIP) about the X axis, in radians.
* @param {Number} yPoleOffset The offset to the Celestial Intermediate Pole (CIP) about the Y axis, in radians.
* @param {Number} ut1MinusUtc The difference in time standards, UT1 - UTC, in seconds.
*
* @private
*/
function EarthOrientationParametersSample(xPoleWander, yPoleWander, xPoleOffset, yPoleOffset, ut1MinusUtc) {
/**
* The pole wander about the X axis, in radians.
* @type {Number}
*/
this.xPoleWander = xPoleWander;
/**
* The pole wander about the Y axis, in radians.
* @type {Number}
*/
this.yPoleWander = yPoleWander;
/**
* The offset to the Celestial Intermediate Pole (CIP) about the X axis, in radians.
* @type {Number}
*/
this.xPoleOffset = xPoleOffset;
/**
* The offset to the Celestial Intermediate Pole (CIP) about the Y axis, in radians.
* @type {Number}
*/
this.yPoleOffset = yPoleOffset;
/**
* The difference in time standards, UT1 - UTC, in seconds.
* @type {Number}
*/
this.ut1MinusUtc = ut1MinusUtc;
}
return EarthOrientationParametersSample;
});
/**
@license
sprintf.js from the php.js project - https://github.com/kvz/phpjs
Directly from https://github.com/kvz/phpjs/blob/master/functions/strings/sprintf.js
php.js is copyright 2012 Kevin van Zonneveld.
Portions copyright Brett Zamir (http://brett-zamir.me), Kevin van Zonneveld
(http://kevin.vanzonneveld.net), Onno Marsman, Theriault, Michael White
(http://getsprink.com), Waldo Malqui Silva, Paulo Freitas, Jack, Jonas
Raoni Soares Silva (http://www.jsfromhell.com), Philip Peterson, Legaev
Andrey, Ates Goral (http://magnetiq.com), Alex, Ratheous, Martijn Wieringa,
Rafa? Kukawski (http://blog.kukawski.pl), lmeyrick
(https://sourceforge.net/projects/bcmath-js/), Nate, Philippe Baumann,
Enrique Gonzalez, Webtoolkit.info (http://www.webtoolkit.info/), Carlos R.
L. Rodrigues (http://www.jsfromhell.com), Ash Searle
(http://hexmen.com/blog/), Jani Hartikainen, travc, Ole Vrijenhoek,
Erkekjetter, Michael Grier, Rafa? Kukawski (http://kukawski.pl), Johnny
Mast (http://www.phpvrouwen.nl), T.Wild, d3x,
http://stackoverflow.com/questions/57803/how-to-convert-decimal-to-hex-in-javascript,
Rafa? Kukawski (http://blog.kukawski.pl/), stag019, pilus, WebDevHobo
(http://webdevhobo.blogspot.com/), marrtins, GeekFG
(http://geekfg.blogspot.com), Andrea Giammarchi
(http://webreflection.blogspot.com), Arpad Ray (mailto:arpad@php.net),
gorthaur, Paul Smith, Tim de Koning (http://www.kingsquare.nl), Joris, Oleg
Eremeev, Steve Hilder, majak, gettimeofday, KELAN, Josh Fraser
(http://onlineaspect.com/2007/06/08/auto-detect-a-time-zone-with-javascript/),
Marc Palau, Martin
(http://www.erlenwiese.de/), Breaking Par Consulting Inc
(http://www.breakingpar.com/bkp/home.nsf/0/87256B280015193F87256CFB006C45F7),
Chris, Mirek Slugen, saulius, Alfonso Jimenez
(http://www.alfonsojimenez.com), Diplom@t (http://difane.com/), felix,
Mailfaker (http://www.weedem.fr/), Tyler Akins (http://rumkin.com), Caio
Ariede (http://caioariede.com), Robin, Kankrelune
(http://www.webfaktory.info/), Karol Kowalski, Imgen Tata
(http://www.myipdf.com/), mdsjack (http://www.mdsjack.bo.it), Dreamer,
Felix Geisendoerfer (http://www.debuggable.com/felix), Lars Fischer, AJ,
David, Aman Gupta, Michael White, Public Domain
(http://www.json.org/json2.js), Steven Levithan
(http://blog.stevenlevithan.com), Sakimori, Pellentesque Malesuada,
Thunder.m, Dj (http://phpjs.org/functions/htmlentities:425#comment_134018),
Steve Clay, David James, Francois, class_exists, nobbler, T. Wild, Itsacon
(http://www.itsacon.net/), date, Ole Vrijenhoek (http://www.nervous.nl/),
Fox, Raphael (Ao RUDLER), Marco, noname, Mateusz "loonquawl" Zalega, Frank
Forte, Arno, ger, mktime, john (http://www.jd-tech.net), Nick Kolosov
(http://sammy.ru), marc andreu, Scott Cariss, Douglas Crockford
(http://javascript.crockford.com), madipta, Slawomir Kaniecki,
ReverseSyntax, Nathan, Alex Wilson, kenneth, Bayron Guevara, Adam Wallner
(http://web2.bitbaro.hu/), paulo kuong, jmweb, Lincoln Ramsay, djmix,
Pyerre, Jon Hohle, Thiago Mata (http://thiagomata.blog.com), lmeyrick
(https://sourceforge.net/projects/bcmath-js/this.), Linuxworld, duncan,
Gilbert, Sanjoy Roy, Shingo, sankai, Oskar Larsson H?gfeldt
(http://oskar-lh.name/), Denny Wardhana, 0m3r, Everlasto, Subhasis Deb,
josh, jd, Pier Paolo Ramon (http://www.mastersoup.com/), P, merabi, Soren
Hansen, Eugene Bulkin (http://doubleaw.com/), Der Simon
(http://innerdom.sourceforge.net/), echo is bad, Ozh, XoraX
(http://www.xorax.info), EdorFaus, JB, J A R, Marc Jansen, Francesco, LH,
Stoyan Kyosev (http://www.svest.org/), nord_ua, omid
(http://phpjs.org/functions/380:380#comment_137122), Brad Touesnard, MeEtc
(http://yass.meetcweb.com), Peter-Paul Koch
(http://www.quirksmode.org/js/beat.html), Olivier Louvignes
(http://mg-crea.com/), T0bsn, Tim Wiel, Bryan Elliott, Jalal Berrami,
Martin, JT, David Randall, Thomas Beaucourt (http://www.webapp.fr), taith,
vlado houba, Pierre-Luc Paour, Kristof Coomans (SCK-CEN Belgian Nucleair
Research Centre), Martin Pool, Kirk Strobeck, Rick Waldron, Brant Messenger
(http://www.brantmessenger.com/), Devan Penner-Woelk, Saulo Vallory, Wagner
B. Soares, Artur Tchernychev, Valentina De Rosa, Jason Wong
(http://carrot.org/), Christoph, Daniel Esteban, strftime, Mick@el, rezna,
Simon Willison (http://simonwillison.net), Anton Ongson, Gabriel Paderni,
Marco van Oort, penutbutterjelly, Philipp Lenssen, Bjorn Roesbeke
(http://www.bjornroesbeke.be/), Bug?, Eric Nagel, Tomasz Wesolowski,
Evertjan Garretsen, Bobby Drake, Blues (http://tech.bluesmoon.info/), Luke
Godfrey, Pul, uestla, Alan C, Ulrich, Rafal Kukawski, Yves Sucaet,
sowberry, Norman "zEh" Fuchs, hitwork, Zahlii, johnrembo, Nick Callen,
Steven Levithan (stevenlevithan.com), ejsanders, Scott Baker, Brian Tafoya
(http://www.premasolutions.com/), Philippe Jausions
(http://pear.php.net/user/jausions), Aidan Lister
(http://aidanlister.com/), Rob, e-mike, HKM, ChaosNo1, metjay, strcasecmp,
strcmp, Taras Bogach, jpfle, Alexander Ermolaev
(http://snippets.dzone.com/user/AlexanderErmolaev), DxGx, kilops, Orlando,
dptr1988, Le Torbi, James (http://www.james-bell.co.uk/), Pedro Tainha
(http://www.pedrotainha.com), James, Arnout Kazemier
(http://www.3rd-Eden.com), Chris McMacken, gabriel paderni, Yannoo,
FGFEmperor, baris ozdil, Tod Gentille, Greg Frazier, jakes, 3D-GRAF, Allan
Jensen (http://www.winternet.no), Howard Yeend, Benjamin Lupton, davook,
daniel airton wermann (http://wermann.com.br), Atli T¨®r, Maximusya, Ryan
W Tenney (http://ryan.10e.us), Alexander M Beedie, fearphage
(http://http/my.opera.com/fearphage/), Nathan Sepulveda, Victor, Matteo,
Billy, stensi, Cord, Manish, T.J. Leahy, Riddler
(http://www.frontierwebdev.com/), Rafa? Kukawski, FremyCompany, Matt
Bradley, Tim de Koning, Luis Salazar (http://www.freaky-media.com/), Diogo
Resende, Rival, Andrej Pavlovic, Garagoth, Le Torbi
(http://www.letorbi.de/), Dino, Josep Sanz (http://www.ws3.es/), rem,
Russell Walker (http://www.nbill.co.uk/), Jamie Beck
(http://www.terabit.ca/), setcookie, Michael, YUI Library:
http://developer.yahoo.com/yui/docs/YAHOO.util.DateLocale.html, Blues at
http://hacks.bluesmoon.info/strftime/strftime.js, Ben
(http://benblume.co.uk/), DtTvB
(http://dt.in.th/2008-09-16.string-length-in-bytes.html), Andreas, William,
meo, incidence, Cagri Ekin, Amirouche, Amir Habibi
(http://www.residence-mixte.com/), Luke Smith (http://lucassmith.name),
Kheang Hok Chin (http://www.distantia.ca/), Jay Klehr, Lorenzo Pisani,
Tony, Yen-Wei Liu, Greenseed, mk.keck, Leslie Hoare, dude, booeyOH, Ben
Bryan
Licensed under the MIT (MIT-LICENSE.txt) license.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL KEVIN VAN ZONNEVELD BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
*/
/*global define*/
define('ThirdParty/sprintf',[],function() {
function sprintf () {
// http://kevin.vanzonneveld.net
// + original by: Ash Searle (http://hexmen.com/blog/)
// + namespaced by: Michael White (http://getsprink.com)
// + tweaked by: Jack
// + improved by: Kevin van Zonneveld (http://kevin.vanzonneveld.net)
// + input by: Paulo Freitas
// + improved by: Kevin van Zonneveld (http://kevin.vanzonneveld.net)
// + input by: Brett Zamir (http://brett-zamir.me)
// + improved by: Kevin van Zonneveld (http://kevin.vanzonneveld.net)
// + improved by: Dj
// + improved by: Allidylls
// * example 1: sprintf("%01.2f", 123.1);
// * returns 1: 123.10
// * example 2: sprintf("[%10s]", 'monkey');
// * returns 2: '[ monkey]'
// * example 3: sprintf("[%'#10s]", 'monkey');
// * returns 3: '[####monkey]'
// * example 4: sprintf("%d", 123456789012345);
// * returns 4: '123456789012345'
var regex = /%%|%(\d+\$)?([-+\'#0 ]*)(\*\d+\$|\*|\d+)?(\.(\*\d+\$|\*|\d+))?([scboxXuideEfFgG])/g;
var a = arguments,
i = 0,
format = a[i++];
// pad()
var pad = function (str, len, chr, leftJustify) {
if (!chr) {
chr = ' ';
}
var padding = (str.length >= len) ? '' : Array(1 + len - str.length >>> 0).join(chr);
return leftJustify ? str + padding : padding + str;
};
// justify()
var justify = function (value, prefix, leftJustify, minWidth, zeroPad, customPadChar) {
var diff = minWidth - value.length;
if (diff > 0) {
if (leftJustify || !zeroPad) {
value = pad(value, minWidth, customPadChar, leftJustify);
} else {
value = value.slice(0, prefix.length) + pad('', diff, '0', true) + value.slice(prefix.length);
}
}
return value;
};
// formatBaseX()
var formatBaseX = function (value, base, prefix, leftJustify, minWidth, precision, zeroPad) {
// Note: casts negative numbers to positive ones
var number = value >>> 0;
prefix = prefix && number && {
'2': '0b',
'8': '0',
'16': '0x'
}[base] || '';
value = prefix + pad(number.toString(base), precision || 0, '0', false);
return justify(value, prefix, leftJustify, minWidth, zeroPad);
};
// formatString()
var formatString = function (value, leftJustify, minWidth, precision, zeroPad, customPadChar) {
if (precision != null) {
value = value.slice(0, precision);
}
return justify(value, '', leftJustify, minWidth, zeroPad, customPadChar);
};
// doFormat()
var doFormat = function (substring, valueIndex, flags, minWidth, _, precision, type) {
var number;
var prefix;
var method;
var textTransform;
var value;
if (substring == '%%') {
return '%';
}
// parse flags
var leftJustify = false,
positivePrefix = '',
zeroPad = false,
prefixBaseX = false,
customPadChar = ' ';
var flagsl = flags.length;
for (var j = 0; flags && j < flagsl; j++) {
switch (flags.charAt(j)) {
case ' ':
positivePrefix = ' ';
break;
case '+':
positivePrefix = '+';
break;
case '-':
leftJustify = true;
break;
case "'":
customPadChar = flags.charAt(j + 1);
break;
case '0':
zeroPad = true;
break;
case '#':
prefixBaseX = true;
break;
}
}
// parameters may be null, undefined, empty-string or real valued
// we want to ignore null, undefined and empty-string values
if (!minWidth) {
minWidth = 0;
} else if (minWidth == '*') {
minWidth = +a[i++];
} else if (minWidth.charAt(0) == '*') {
minWidth = +a[minWidth.slice(1, -1)];
} else {
minWidth = +minWidth;
}
// Note: undocumented perl feature:
if (minWidth < 0) {
minWidth = -minWidth;
leftJustify = true;
}
if (!isFinite(minWidth)) {
throw new Error('sprintf: (minimum-)width must be finite');
}
if (!precision) {
precision = 'fFeE'.indexOf(type) > -1 ? 6 : (type == 'd') ? 0 : undefined;
} else if (precision == '*') {
precision = +a[i++];
} else if (precision.charAt(0) == '*') {
precision = +a[precision.slice(1, -1)];
} else {
precision = +precision;
}
// grab value using valueIndex if required?
value = valueIndex ? a[valueIndex.slice(0, -1)] : a[i++];
switch (type) {
case 's':
return formatString(String(value), leftJustify, minWidth, precision, zeroPad, customPadChar);
case 'c':
return formatString(String.fromCharCode(+value), leftJustify, minWidth, precision, zeroPad);
case 'b':
return formatBaseX(value, 2, prefixBaseX, leftJustify, minWidth, precision, zeroPad);
case 'o':
return formatBaseX(value, 8, prefixBaseX, leftJustify, minWidth, precision, zeroPad);
case 'x':
return formatBaseX(value, 16, prefixBaseX, leftJustify, minWidth, precision, zeroPad);
case 'X':
return formatBaseX(value, 16, prefixBaseX, leftJustify, minWidth, precision, zeroPad).toUpperCase();
case 'u':
return formatBaseX(value, 10, prefixBaseX, leftJustify, minWidth, precision, zeroPad);
case 'i':
case 'd':
number = +value || 0;
number = Math.round(number - number % 1); // Plain Math.round doesn't just truncate
prefix = number < 0 ? '-' : positivePrefix;
value = prefix + pad(String(Math.abs(number)), precision, '0', false);
return justify(value, prefix, leftJustify, minWidth, zeroPad);
case 'e':
case 'E':
case 'f': // Should handle locales (as per setlocale)
case 'F':
case 'g':
case 'G':
number = +value;
prefix = number < 0 ? '-' : positivePrefix;
method = ['toExponential', 'toFixed', 'toPrecision']['efg'.indexOf(type.toLowerCase())];
textTransform = ['toString', 'toUpperCase']['eEfFgG'.indexOf(type) % 2];
value = prefix + Math.abs(number)[method](precision);
return justify(value, prefix, leftJustify, minWidth, zeroPad)[textTransform]();
default:
return substring;
}
};
return format.replace(regex, doFormat);
}
return sprintf;
});
/*global define*/
define('Core/GregorianDate',[],function() {
'use strict';
/**
* Represents a Gregorian date in a more precise format than the JavaScript Date object.
* In addition to submillisecond precision, this object can also represent leap seconds.
* @alias GregorianDate
* @constructor
*
* @see JulianDate#toGregorianDate
*/
function GregorianDate(year, month, day, hour, minute, second, millisecond, isLeapSecond) {
/**
* Gets or sets the year as a whole number.
* @type {Number}
*/
this.year = year;
/**
* Gets or sets the month as a whole number with range [1, 12].
* @type {Number}
*/
this.month = month;
/**
* Gets or sets the day of the month as a whole number starting at 1.
* @type {Number}
*/
this.day = day;
/**
* Gets or sets the hour as a whole number with range [0, 23].
* @type {Number}
*/
this.hour = hour;
/**
* Gets or sets the minute of the hour as a whole number with range [0, 59].
* @type {Number}
*/
this.minute = minute;
/**
* Gets or sets the second of the minute as a whole number with range [0, 60], with 60 representing a leap second.
* @type {Number}
*/
this.second = second;
/**
* Gets or sets the millisecond of the second as a floating point number with range [0.0, 1000.0).
* @type {Number}
*/
this.millisecond = millisecond;
/**
* Gets or sets whether this time is during a leap second.
* @type {Boolean}
*/
this.isLeapSecond = isLeapSecond;
}
return GregorianDate;
});
/*global define*/
define('Core/isLeapYear',[
'./DeveloperError'
], function(
DeveloperError) {
'use strict';
/**
* Determines if a given date is a leap year.
*
* @exports isLeapYear
*
* @param {Number} year The year to be tested.
* @returns {Boolean} True if year is a leap year.
*
* @example
* var leapYear = Cesium.isLeapYear(2000); // true
*/
function isLeapYear(year) {
if (year === null || isNaN(year)) {
throw new DeveloperError('year is required and must be a number.');
}
return ((year % 4 === 0) && (year % 100 !== 0)) || (year % 400 === 0);
}
return isLeapYear;
});
/*global define*/
define('Core/LeapSecond',[],function() {
'use strict';
/**
* Describes a single leap second, which is constructed from a {@link JulianDate} and a
* numerical offset representing the number of seconds TAI is ahead of the UTC time standard.
* @alias LeapSecond
* @constructor
*
* @param {JulianDate} [date] A Julian date representing the time of the leap second.
* @param {Number} [offset] The cumulative number of seconds that TAI is ahead of UTC at the provided date.
*/
function LeapSecond(date, offset) {
/**
* Gets or sets the date at which this leap second occurs.
* @type {JulianDate}
*/
this.julianDate = date;
/**
* Gets or sets the cumulative number of seconds between the UTC and TAI time standards at the time
* of this leap second.
* @type {Number}
*/
this.offset = offset;
}
return LeapSecond;
});
/*global define*/
define('Core/TimeConstants',[
'./freezeObject'
], function(
freezeObject) {
'use strict';
/**
* Constants for time conversions like those done by {@link JulianDate}.
*
* @exports TimeConstants
*
* @see JulianDate
*
* @private
*/
var TimeConstants = {
/**
* The number of seconds in one millisecond: 0.001
* @type {Number}
* @constant
*/
SECONDS_PER_MILLISECOND : 0.001,
/**
* The number of seconds in one minute: 60.
* @type {Number}
* @constant
*/
SECONDS_PER_MINUTE : 60.0,
/**
* The number of minutes in one hour: 60.
* @type {Number}
* @constant
*/
MINUTES_PER_HOUR : 60.0,
/**
* The number of hours in one day: 24.
* @type {Number}
* @constant
*/
HOURS_PER_DAY : 24.0,
/**
* The number of seconds in one hour: 3600.
* @type {Number}
* @constant
*/
SECONDS_PER_HOUR : 3600.0,
/**
* The number of minutes in one day: 1440.
* @type {Number}
* @constant
*/
MINUTES_PER_DAY : 1440.0,
/**
* The number of seconds in one day, ignoring leap seconds: 86400.
* @type {Number}
* @constant
*/
SECONDS_PER_DAY : 86400.0,
/**
* The number of days in one Julian century: 36525.
* @type {Number}
* @constant
*/
DAYS_PER_JULIAN_CENTURY : 36525.0,
/**
* One trillionth of a second.
* @type {Number}
* @constant
*/
PICOSECOND : 0.000000001,
/**
* The number of days to subtract from a Julian date to determine the
* modified Julian date, which gives the number of days since midnight
* on November 17, 1858.
* @type {Number}
* @constant
*/
MODIFIED_JULIAN_DATE_DIFFERENCE : 2400000.5
};
return freezeObject(TimeConstants);
});
/*global define*/
define('Core/TimeStandard',[
'./freezeObject'
], function(
freezeObject) {
'use strict';
/**
* Provides the type of time standards which JulianDate can take as input.
*
* @exports TimeStandard
*
* @see JulianDate
*/
var TimeStandard = {
/**
* Represents the coordinated Universal Time (UTC) time standard.
*
* UTC is related to TAI according to the relationship
* UTC = TAI - deltaT where deltaT is the number of leap
* seconds which have been introduced as of the time in TAI.
*
*/
UTC : 0,
/**
* Represents the International Atomic Time (TAI) time standard.
* TAI is the principal time standard to which the other time standards are related.
*/
TAI : 1
};
return freezeObject(TimeStandard);
});
/*global define*/
define('Core/JulianDate',[
'../ThirdParty/sprintf',
'./binarySearch',
'./defaultValue',
'./defined',
'./DeveloperError',
'./GregorianDate',
'./isLeapYear',
'./LeapSecond',
'./TimeConstants',
'./TimeStandard'
], function(
sprintf,
binarySearch,
defaultValue,
defined,
DeveloperError,
GregorianDate,
isLeapYear,
LeapSecond,
TimeConstants,
TimeStandard) {
'use strict';
var gregorianDateScratch = new GregorianDate();
var daysInMonth = [31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31];
var daysInLeapFeburary = 29;
function compareLeapSecondDates(leapSecond, dateToFind) {
return JulianDate.compare(leapSecond.julianDate, dateToFind.julianDate);
}
// we don't really need a leap second instance, anything with a julianDate property will do
var binarySearchScratchLeapSecond = new LeapSecond();
function convertUtcToTai(julianDate) {
//Even though julianDate is in UTC, we'll treat it as TAI and
//search the leap second table for it.
binarySearchScratchLeapSecond.julianDate = julianDate;
var leapSeconds = JulianDate.leapSeconds;
var index = binarySearch(leapSeconds, binarySearchScratchLeapSecond, compareLeapSecondDates);
if (index < 0) {
index = ~index;
}
if (index >= leapSeconds.length) {
index = leapSeconds.length - 1;
}
var offset = leapSeconds[index].offset;
if (index > 0) {
//Now we have the index of the closest leap second that comes on or after our UTC time.
//However, if the difference between the UTC date being converted and the TAI
//defined leap second is greater than the offset, we are off by one and need to use
//the previous leap second.
var difference = JulianDate.secondsDifference(leapSeconds[index].julianDate, julianDate);
if (difference > offset) {
index--;
offset = leapSeconds[index].offset;
}
}
JulianDate.addSeconds(julianDate, offset, julianDate);
}
function convertTaiToUtc(julianDate, result) {
binarySearchScratchLeapSecond.julianDate = julianDate;
var leapSeconds = JulianDate.leapSeconds;
var index = binarySearch(leapSeconds, binarySearchScratchLeapSecond, compareLeapSecondDates);
if (index < 0) {
index = ~index;
}
//All times before our first leap second get the first offset.
if (index === 0) {
return JulianDate.addSeconds(julianDate, -leapSeconds[0].offset, result);
}
//All times after our leap second get the last offset.
if (index >= leapSeconds.length) {
return JulianDate.addSeconds(julianDate, -leapSeconds[index - 1].offset, result);
}
//Compute the difference between the found leap second and the time we are converting.
var difference = JulianDate.secondsDifference(leapSeconds[index].julianDate, julianDate);
if (difference === 0) {
//The date is in our leap second table.
return JulianDate.addSeconds(julianDate, -leapSeconds[index].offset, result);
}
if (difference <= 1.0) {
//The requested date is during the moment of a leap second, then we cannot convert to UTC
return undefined;
}
//The time is in between two leap seconds, index is the leap second after the date
//we're converting, so we subtract one to get the correct LeapSecond instance.
return JulianDate.addSeconds(julianDate, -leapSeconds[--index].offset, result);
}
function setComponents(wholeDays, secondsOfDay, julianDate) {
var extraDays = (secondsOfDay / TimeConstants.SECONDS_PER_DAY) | 0;
wholeDays += extraDays;
secondsOfDay -= TimeConstants.SECONDS_PER_DAY * extraDays;
if (secondsOfDay < 0) {
wholeDays--;
secondsOfDay += TimeConstants.SECONDS_PER_DAY;
}
julianDate.dayNumber = wholeDays;
julianDate.secondsOfDay = secondsOfDay;
return julianDate;
}
function computeJulianDateComponents(year, month, day, hour, minute, second, millisecond) {
// Algorithm from page 604 of the Explanatory Supplement to the
// Astronomical Almanac (Seidelmann 1992).
var a = ((month - 14) / 12) | 0;
var b = year + 4800 + a;
var dayNumber = (((1461 * b) / 4) | 0) + (((367 * (month - 2 - 12 * a)) / 12) | 0) - (((3 * (((b + 100) / 100) | 0)) / 4) | 0) + day - 32075;
// JulianDates are noon-based
hour = hour - 12;
if (hour < 0) {
hour += 24;
}
var secondsOfDay = second + ((hour * TimeConstants.SECONDS_PER_HOUR) + (minute * TimeConstants.SECONDS_PER_MINUTE) + (millisecond * TimeConstants.SECONDS_PER_MILLISECOND));
if (secondsOfDay >= 43200.0) {
dayNumber -= 1;
}
return [dayNumber, secondsOfDay];
}
//Regular expressions used for ISO8601 date parsing.
//YYYY
var matchCalendarYear = /^(\d{4})$/;
//YYYY-MM (YYYYMM is invalid)
var matchCalendarMonth = /^(\d{4})-(\d{2})$/;
//YYYY-DDD or YYYYDDD
var matchOrdinalDate = /^(\d{4})-?(\d{3})$/;
//YYYY-Www or YYYYWww or YYYY-Www-D or YYYYWwwD
var matchWeekDate = /^(\d{4})-?W(\d{2})-?(\d{1})?$/;
//YYYY-MM-DD or YYYYMMDD
var matchCalendarDate = /^(\d{4})-?(\d{2})-?(\d{2})$/;
// Match utc offset
var utcOffset = /([Z+\-])?(\d{2})?:?(\d{2})?$/;
// Match hours HH or HH.xxxxx
var matchHours = /^(\d{2})(\.\d+)?/.source + utcOffset.source;
// Match hours/minutes HH:MM HHMM.xxxxx
var matchHoursMinutes = /^(\d{2}):?(\d{2})(\.\d+)?/.source + utcOffset.source;
// Match hours/minutes HH:MM:SS HHMMSS.xxxxx
var matchHoursMinutesSeconds = /^(\d{2}):?(\d{2}):?(\d{2})(\.\d+)?/.source + utcOffset.source;
var iso8601ErrorMessage = 'Invalid ISO 8601 date.';
/**
* Represents an astronomical Julian date, which is the number of days since noon on January 1, -4712 (4713 BC).
* For increased precision, this class stores the whole number part of the date and the seconds
* part of the date in separate components. In order to be safe for arithmetic and represent
* leap seconds, the date is always stored in the International Atomic Time standard
* {@link TimeStandard.TAI}.
* @alias JulianDate
* @constructor
*
* @param {Number} [julianDayNumber=0.0] The Julian Day Number representing the number of whole days. Fractional days will also be handled correctly.
* @param {Number} [secondsOfDay=0.0] The number of seconds into the current Julian Day Number. Fractional seconds, negative seconds and seconds greater than a day will be handled correctly.
* @param {TimeStandard} [timeStandard=TimeStandard.UTC] The time standard in which the first two parameters are defined.
*/
function JulianDate(julianDayNumber, secondsOfDay, timeStandard) {
/**
* Gets or sets the number of whole days.
* @type {Number}
*/
this.dayNumber = undefined;
/**
* Gets or sets the number of seconds into the current day.
* @type {Number}
*/
this.secondsOfDay = undefined;
julianDayNumber = defaultValue(julianDayNumber, 0.0);
secondsOfDay = defaultValue(secondsOfDay, 0.0);
timeStandard = defaultValue(timeStandard, TimeStandard.UTC);
//If julianDayNumber is fractional, make it an integer and add the number of seconds the fraction represented.
var wholeDays = julianDayNumber | 0;
secondsOfDay = secondsOfDay + (julianDayNumber - wholeDays) * TimeConstants.SECONDS_PER_DAY;
setComponents(wholeDays, secondsOfDay, this);
if (timeStandard === TimeStandard.UTC) {
convertUtcToTai(this);
}
}
/**
* Creates a new instance from a JavaScript Date.
*
* @param {Date} date A JavaScript Date.
* @param {JulianDate} [result] An existing instance to use for the result.
* @returns {JulianDate} The modified result parameter or a new instance if none was provided.
*
* @exception {DeveloperError} date must be a valid JavaScript Date.
*/
JulianDate.fromDate = function(date, result) {
if (!(date instanceof Date) || isNaN(date.getTime())) {
throw new DeveloperError('date must be a valid JavaScript Date.');
}
var components = computeJulianDateComponents(date.getUTCFullYear(), date.getUTCMonth() + 1, date.getUTCDate(), date.getUTCHours(), date.getUTCMinutes(), date.getUTCSeconds(), date.getUTCMilliseconds());
if (!defined(result)) {
return new JulianDate(components[0], components[1], TimeStandard.UTC);
}
setComponents(components[0], components[1], result);
convertUtcToTai(result);
return result;
};
/**
* Creates a new instance from a from an {@link http://en.wikipedia.org/wiki/ISO_8601|ISO 8601} date.
* This method is superior to Date.parse because it will handle all valid formats defined by the ISO 8601
* specification, including leap seconds and sub-millisecond times, which discarded by most JavaScript implementations.
*
* @param {String} iso8601String An ISO 8601 date.
* @param {JulianDate} [result] An existing instance to use for the result.
* @returns {JulianDate} The modified result parameter or a new instance if none was provided.
*
* @exception {DeveloperError} Invalid ISO 8601 date.
*/
JulianDate.fromIso8601 = function(iso8601String, result) {
if (typeof iso8601String !== 'string') {
throw new DeveloperError(iso8601ErrorMessage);
}
//Comma and decimal point both indicate a fractional number according to ISO 8601,
//start out by blanket replacing , with . which is the only valid such symbol in JS.
iso8601String = iso8601String.replace(',', '.');
//Split the string into its date and time components, denoted by a mandatory T
var tokens = iso8601String.split('T');
var year;
var month = 1;
var day = 1;
var hour = 0;
var minute = 0;
var second = 0;
var millisecond = 0;
//Lacking a time is okay, but a missing date is illegal.
var date = tokens[0];
var time = tokens[1];
var tmp;
var inLeapYear;
if (!defined(date)) {
throw new DeveloperError(iso8601ErrorMessage);
}
var dashCount;
//First match the date against possible regular expressions.
tokens = date.match(matchCalendarDate);
if (tokens !== null) {
dashCount = date.split('-').length - 1;
if (dashCount > 0 && dashCount !== 2) {
throw new DeveloperError(iso8601ErrorMessage);
}
year = +tokens[1];
month = +tokens[2];
day = +tokens[3];
} else {
tokens = date.match(matchCalendarMonth);
if (tokens !== null) {
year = +tokens[1];
month = +tokens[2];
} else {
tokens = date.match(matchCalendarYear);
if (tokens !== null) {
year = +tokens[1];
} else {
//Not a year/month/day so it must be an ordinal date.
var dayOfYear;
tokens = date.match(matchOrdinalDate);
if (tokens !== null) {
year = +tokens[1];
dayOfYear = +tokens[2];
inLeapYear = isLeapYear(year);
//This validation is only applicable for this format.
if (dayOfYear < 1 || (inLeapYear && dayOfYear > 366) || (!inLeapYear && dayOfYear > 365)) {
throw new DeveloperError(iso8601ErrorMessage);
}
} else {
tokens = date.match(matchWeekDate);
if (tokens !== null) {
//ISO week date to ordinal date from
//http://en.wikipedia.org/w/index.php?title=ISO_week_date&oldid=474176775
year = +tokens[1];
var weekNumber = +tokens[2];
var dayOfWeek = +tokens[3] || 0;
dashCount = date.split('-').length - 1;
if (dashCount > 0 &&
((!defined(tokens[3]) && dashCount !== 1) ||
(defined(tokens[3]) && dashCount !== 2))) {
throw new DeveloperError(iso8601ErrorMessage);
}
var january4 = new Date(Date.UTC(year, 0, 4));
dayOfYear = (weekNumber * 7) + dayOfWeek - january4.getUTCDay() - 3;
} else {
//None of our regular expressions succeeded in parsing the date properly.
throw new DeveloperError(iso8601ErrorMessage);
}
}
//Split an ordinal date into month/day.
tmp = new Date(Date.UTC(year, 0, 1));
tmp.setUTCDate(dayOfYear);
month = tmp.getUTCMonth() + 1;
day = tmp.getUTCDate();
}
}
}
//Now that we have all of the date components, validate them to make sure nothing is out of range.
inLeapYear = isLeapYear(year);
if (month < 1 || month > 12 || day < 1 || ((month !== 2 || !inLeapYear) && day > daysInMonth[month - 1]) || (inLeapYear && month === 2 && day > daysInLeapFeburary)) {
throw new DeveloperError(iso8601ErrorMessage);
}
//Not move onto the time string, which is much simpler.
var offsetIndex;
if (defined(time)) {
tokens = time.match(matchHoursMinutesSeconds);
if (tokens !== null) {
dashCount = time.split(':').length - 1;
if (dashCount > 0 && dashCount !== 2 && dashCount !== 3) {
throw new DeveloperError(iso8601ErrorMessage);
}
hour = +tokens[1];
minute = +tokens[2];
second = +tokens[3];
millisecond = +(tokens[4] || 0) * 1000.0;
offsetIndex = 5;
} else {
tokens = time.match(matchHoursMinutes);
if (tokens !== null) {
dashCount = time.split(':').length - 1;
if (dashCount > 2) {
throw new DeveloperError(iso8601ErrorMessage);
}
hour = +tokens[1];
minute = +tokens[2];
second = +(tokens[3] || 0) * 60.0;
offsetIndex = 4;
} else {
tokens = time.match(matchHours);
if (tokens !== null) {
hour = +tokens[1];
minute = +(tokens[2] || 0) * 60.0;
offsetIndex = 3;
} else {
throw new DeveloperError(iso8601ErrorMessage);
}
}
}
//Validate that all values are in proper range. Minutes and hours have special cases at 60 and 24.
if (minute >= 60 || second >= 61 || hour > 24 || (hour === 24 && (minute > 0 || second > 0 || millisecond > 0))) {
throw new DeveloperError(iso8601ErrorMessage);
}
//Check the UTC offset value, if no value exists, use local time
//a Z indicates UTC, + or - are offsets.
var offset = tokens[offsetIndex];
var offsetHours = +(tokens[offsetIndex + 1]);
var offsetMinutes = +(tokens[offsetIndex + 2] || 0);
switch (offset) {
case '+':
hour = hour - offsetHours;
minute = minute - offsetMinutes;
break;
case '-':
hour = hour + offsetHours;
minute = minute + offsetMinutes;
break;
case 'Z':
break;
default:
minute = minute + new Date(Date.UTC(year, month - 1, day, hour, minute)).getTimezoneOffset();
break;
}
} else {
//If no time is specified, it is considered the beginning of the day, local time.
minute = minute + new Date(year, month - 1, day).getTimezoneOffset();
}
//ISO8601 denotes a leap second by any time having a seconds component of 60 seconds.
//If that's the case, we need to temporarily subtract a second in order to build a UTC date.
//Then we add it back in after converting to TAI.
var isLeapSecond = second === 60;
if (isLeapSecond) {
second--;
}
//Even if we successfully parsed the string into its components, after applying UTC offset or
//special cases like 24:00:00 denoting midnight, we need to normalize the data appropriately.
//milliseconds can never be greater than 1000, and seconds can't be above 60, so we start with minutes
while (minute >= 60) {
minute -= 60;
hour++;
}
while (hour >= 24) {
hour -= 24;
day++;
}
tmp = (inLeapYear && month === 2) ? daysInLeapFeburary : daysInMonth[month - 1];
while (day > tmp) {
day -= tmp;
month++;
if (month > 12) {
month -= 12;
year++;
}
tmp = (inLeapYear && month === 2) ? daysInLeapFeburary : daysInMonth[month - 1];
}
//If UTC offset is at the beginning/end of the day, minutes can be negative.
while (minute < 0) {
minute += 60;
hour--;
}
while (hour < 0) {
hour += 24;
day--;
}
while (day < 1) {
month--;
if (month < 1) {
month += 12;
year--;
}
tmp = (inLeapYear && month === 2) ? daysInLeapFeburary : daysInMonth[month - 1];
day += tmp;
}
//Now create the JulianDate components from the Gregorian date and actually create our instance.
var components = computeJulianDateComponents(year, month, day, hour, minute, second, millisecond);
if (!defined(result)) {
result = new JulianDate(components[0], components[1], TimeStandard.UTC);
} else {
setComponents(components[0], components[1], result);
convertUtcToTai(result);
}
//If we were on a leap second, add it back.
if (isLeapSecond) {
JulianDate.addSeconds(result, 1, result);
}
return result;
};
/**
* Creates a new instance that represents the current system time.
* This is equivalent to calling JulianDate.fromDate(new Date());.
*
* @param {JulianDate} [result] An existing instance to use for the result.
* @returns {JulianDate} The modified result parameter or a new instance if none was provided.
*/
JulianDate.now = function(result) {
return JulianDate.fromDate(new Date(), result);
};
var toGregorianDateScratch = new JulianDate(0, 0, TimeStandard.TAI);
/**
* Creates a {@link GregorianDate} from the provided instance.
*
* @param {JulianDate} julianDate The date to be converted.
* @param {GregorianDate} [result] An existing instance to use for the result.
* @returns {GregorianDate} The modified result parameter or a new instance if none was provided.
*/
JulianDate.toGregorianDate = function(julianDate, result) {
if (!defined(julianDate)) {
throw new DeveloperError('julianDate is required.');
}
var isLeapSecond = false;
var thisUtc = convertTaiToUtc(julianDate, toGregorianDateScratch);
if (!defined(thisUtc)) {
//Conversion to UTC will fail if we are during a leap second.
//If that's the case, subtract a second and convert again.
//JavaScript doesn't support leap seconds, so this results in second 59 being repeated twice.
JulianDate.addSeconds(julianDate, -1, toGregorianDateScratch);
thisUtc = convertTaiToUtc(toGregorianDateScratch, toGregorianDateScratch);
isLeapSecond = true;
}
var julianDayNumber = thisUtc.dayNumber;
var secondsOfDay = thisUtc.secondsOfDay;
if (secondsOfDay >= 43200.0) {
julianDayNumber += 1;
}
// Algorithm from page 604 of the Explanatory Supplement to the
// Astronomical Almanac (Seidelmann 1992).
var L = (julianDayNumber + 68569) | 0;
var N = (4 * L / 146097) | 0;
L = (L - (((146097 * N + 3) / 4) | 0)) | 0;
var I = ((4000 * (L + 1)) / 1461001) | 0;
L = (L - (((1461 * I) / 4) | 0) + 31) | 0;
var J = ((80 * L) / 2447) | 0;
var day = (L - (((2447 * J) / 80) | 0)) | 0;
L = (J / 11) | 0;
var month = (J + 2 - 12 * L) | 0;
var year = (100 * (N - 49) + I + L) | 0;
var hour = (secondsOfDay / TimeConstants.SECONDS_PER_HOUR) | 0;
var remainingSeconds = secondsOfDay - (hour * TimeConstants.SECONDS_PER_HOUR);
var minute = (remainingSeconds / TimeConstants.SECONDS_PER_MINUTE) | 0;
remainingSeconds = remainingSeconds - (minute * TimeConstants.SECONDS_PER_MINUTE);
var second = remainingSeconds | 0;
var millisecond = ((remainingSeconds - second) / TimeConstants.SECONDS_PER_MILLISECOND);
// JulianDates are noon-based
hour += 12;
if (hour > 23) {
hour -= 24;
}
//If we were on a leap second, add it back.
if (isLeapSecond) {
second += 1;
}
if (!defined(result)) {
return new GregorianDate(year, month, day, hour, minute, second, millisecond, isLeapSecond);
}
result.year = year;
result.month = month;
result.day = day;
result.hour = hour;
result.minute = minute;
result.second = second;
result.millisecond = millisecond;
result.isLeapSecond = isLeapSecond;
return result;
};
/**
* Creates a JavaScript Date from the provided instance.
* Since JavaScript dates are only accurate to the nearest millisecond and
* cannot represent a leap second, consider using {@link JulianDate.toGregorianDate} instead.
* If the provided JulianDate is during a leap second, the previous second is used.
*
* @param {JulianDate} julianDate The date to be converted.
* @returns {Date} A new instance representing the provided date.
*/
JulianDate.toDate = function(julianDate) {
if (!defined(julianDate)) {
throw new DeveloperError('julianDate is required.');
}
var gDate = JulianDate.toGregorianDate(julianDate, gregorianDateScratch);
var second = gDate.second;
if (gDate.isLeapSecond) {
second -= 1;
}
return new Date(Date.UTC(gDate.year, gDate.month - 1, gDate.day, gDate.hour, gDate.minute, second, gDate.millisecond));
};
/**
* Creates an ISO8601 representation of the provided date.
*
* @param {JulianDate} julianDate The date to be converted.
* @param {Number} [precision] The number of fractional digits used to represent the seconds component. By default, the most precise representation is used.
* @returns {String} The ISO8601 representation of the provided date.
*/
JulianDate.toIso8601 = function(julianDate, precision) {
if (!defined(julianDate)) {
throw new DeveloperError('julianDate is required.');
}
var gDate = JulianDate.toGregorianDate(julianDate, gDate);
var millisecondStr;
if (!defined(precision) && gDate.millisecond !== 0) {
//Forces milliseconds into a number with at least 3 digits to whatever the default toString() precision is.
millisecondStr = (gDate.millisecond * 0.01).toString().replace('.', '');
return sprintf("%04d-%02d-%02dT%02d:%02d:%02d.%sZ", gDate.year, gDate.month, gDate.day, gDate.hour, gDate.minute, gDate.second, millisecondStr);
}
//Precision is either 0 or milliseconds is 0 with undefined precision, in either case, leave off milliseconds entirely
if (!defined(precision) || precision === 0) {
return sprintf("%04d-%02d-%02dT%02d:%02d:%02dZ", gDate.year, gDate.month, gDate.day, gDate.hour, gDate.minute, gDate.second);
}
//Forces milliseconds into a number with at least 3 digits to whatever the specified precision is.
millisecondStr = (gDate.millisecond * 0.01).toFixed(precision).replace('.', '').slice(0, precision);
return sprintf("%04d-%02d-%02dT%02d:%02d:%02d.%sZ", gDate.year, gDate.month, gDate.day, gDate.hour, gDate.minute, gDate.second, millisecondStr);
};
/**
* Duplicates a JulianDate instance.
*
* @param {JulianDate} julianDate The date to duplicate.
* @param {JulianDate} [result] An existing instance to use for the result.
* @returns {JulianDate} The modified result parameter or a new instance if none was provided. Returns undefined if julianDate is undefined.
*/
JulianDate.clone = function(julianDate, result) {
if (!defined(julianDate)) {
return undefined;
}
if (!defined(result)) {
return new JulianDate(julianDate.dayNumber, julianDate.secondsOfDay, TimeStandard.TAI);
}
result.dayNumber = julianDate.dayNumber;
result.secondsOfDay = julianDate.secondsOfDay;
return result;
};
/**
* Compares two instances.
*
* @param {JulianDate} left The first instance.
* @param {JulianDate} right The second instance.
* @returns {Number} A negative value if left is less than right, a positive value if left is greater than right, or zero if left and right are equal.
*/
JulianDate.compare = function(left, right) {
if (!defined(left)) {
throw new DeveloperError('left is required.');
}
if (!defined(right)) {
throw new DeveloperError('right is required.');
}
var julianDayNumberDifference = left.dayNumber - right.dayNumber;
if (julianDayNumberDifference !== 0) {
return julianDayNumberDifference;
}
return left.secondsOfDay - right.secondsOfDay;
};
/**
* Compares two instances and returns true if they are equal, false otherwise.
*
* @param {JulianDate} [left] The first instance.
* @param {JulianDate} [right] The second instance.
* @returns {Boolean} true if the dates are equal; otherwise, false.
*/
JulianDate.equals = function(left, right) {
return (left === right) ||
(defined(left) &&
defined(right) &&
left.dayNumber === right.dayNumber &&
left.secondsOfDay === right.secondsOfDay);
};
/**
* Compares two instances and returns true if they are within epsilon seconds of
* each other. That is, in order for the dates to be considered equal (and for
* this function to return true), the absolute value of the difference between them, in
* seconds, must be less than epsilon.
*
* @param {JulianDate} [left] The first instance.
* @param {JulianDate} [right] The second instance.
* @param {Number} epsilon The maximum number of seconds that should separate the two instances.
* @returns {Boolean} true if the two dates are within epsilon seconds of each other; otherwise false.
*/
JulianDate.equalsEpsilon = function(left, right, epsilon) {
if (!defined(epsilon)) {
throw new DeveloperError('epsilon is required.');
}
return (left === right) ||
(defined(left) &&
defined(right) &&
Math.abs(JulianDate.secondsDifference(left, right)) <= epsilon);
};
/**
* Computes the total number of whole and fractional days represented by the provided instance.
*
* @param {JulianDate} julianDate The date.
* @returns {Number} The Julian date as single floating point number.
*/
JulianDate.totalDays = function(julianDate) {
if (!defined(julianDate)) {
throw new DeveloperError('julianDate is required.');
}
return julianDate.dayNumber + (julianDate.secondsOfDay / TimeConstants.SECONDS_PER_DAY);
};
/**
* Computes the difference in seconds between the provided instance.
*
* @param {JulianDate} left The first instance.
* @param {JulianDate} right The second instance.
* @returns {Number} The difference, in seconds, when subtracting right from left.
*/
JulianDate.secondsDifference = function(left, right) {
if (!defined(left)) {
throw new DeveloperError('left is required.');
}
if (!defined(right)) {
throw new DeveloperError('right is required.');
}
var dayDifference = (left.dayNumber - right.dayNumber) * TimeConstants.SECONDS_PER_DAY;
return (dayDifference + (left.secondsOfDay - right.secondsOfDay));
};
/**
* Computes the difference in days between the provided instance.
*
* @param {JulianDate} left The first instance.
* @param {JulianDate} right The second instance.
* @returns {Number} The difference, in days, when subtracting right from left.
*/
JulianDate.daysDifference = function(left, right) {
if (!defined(left)) {
throw new DeveloperError('left is required.');
}
if (!defined(right)) {
throw new DeveloperError('right is required.');
}
var dayDifference = (left.dayNumber - right.dayNumber);
var secondDifference = (left.secondsOfDay - right.secondsOfDay) / TimeConstants.SECONDS_PER_DAY;
return dayDifference + secondDifference;
};
/**
* Computes the number of seconds the provided instance is ahead of UTC.
*
* @param {JulianDate} julianDate The date.
* @returns {Number} The number of seconds the provided instance is ahead of UTC
*/
JulianDate.computeTaiMinusUtc = function(julianDate) {
binarySearchScratchLeapSecond.julianDate = julianDate;
var leapSeconds = JulianDate.leapSeconds;
var index = binarySearch(leapSeconds, binarySearchScratchLeapSecond, compareLeapSecondDates);
if (index < 0) {
index = ~index;
--index;
if (index < 0) {
index = 0;
}
}
return leapSeconds[index].offset;
};
/**
* Adds the provided number of seconds to the provided date instance.
*
* @param {JulianDate} julianDate The date.
* @param {Number} seconds The number of seconds to add or subtract.
* @param {JulianDate} result An existing instance to use for the result.
* @returns {JulianDate} The modified result parameter.
*/
JulianDate.addSeconds = function(julianDate, seconds, result) {
if (!defined(julianDate)) {
throw new DeveloperError('julianDate is required.');
}
if (!defined(seconds)) {
throw new DeveloperError('seconds is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required.');
}
return setComponents(julianDate.dayNumber, julianDate.secondsOfDay + seconds, result);
};
/**
* Adds the provided number of minutes to the provided date instance.
*
* @param {JulianDate} julianDate The date.
* @param {Number} minutes The number of minutes to add or subtract.
* @param {JulianDate} result An existing instance to use for the result.
* @returns {JulianDate} The modified result parameter.
*/
JulianDate.addMinutes = function(julianDate, minutes, result) {
if (!defined(julianDate)) {
throw new DeveloperError('julianDate is required.');
}
if (!defined(minutes)) {
throw new DeveloperError('minutes is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required.');
}
var newSecondsOfDay = julianDate.secondsOfDay + (minutes * TimeConstants.SECONDS_PER_MINUTE);
return setComponents(julianDate.dayNumber, newSecondsOfDay, result);
};
/**
* Adds the provided number of hours to the provided date instance.
*
* @param {JulianDate} julianDate The date.
* @param {Number} hours The number of hours to add or subtract.
* @param {JulianDate} result An existing instance to use for the result.
* @returns {JulianDate} The modified result parameter.
*/
JulianDate.addHours = function(julianDate, hours, result) {
if (!defined(julianDate)) {
throw new DeveloperError('julianDate is required.');
}
if (!defined(hours)) {
throw new DeveloperError('hours is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required.');
}
var newSecondsOfDay = julianDate.secondsOfDay + (hours * TimeConstants.SECONDS_PER_HOUR);
return setComponents(julianDate.dayNumber, newSecondsOfDay, result);
};
/**
* Adds the provided number of days to the provided date instance.
*
* @param {JulianDate} julianDate The date.
* @param {Number} days The number of days to add or subtract.
* @param {JulianDate} result An existing instance to use for the result.
* @returns {JulianDate} The modified result parameter.
*/
JulianDate.addDays = function(julianDate, days, result) {
if (!defined(julianDate)) {
throw new DeveloperError('julianDate is required.');
}
if (!defined(days)) {
throw new DeveloperError('days is required.');
}
if (!defined(result)) {
throw new DeveloperError('result is required.');
}
var newJulianDayNumber = julianDate.dayNumber + days;
return setComponents(newJulianDayNumber, julianDate.secondsOfDay, result);
};
/**
* Compares the provided instances and returns true if left is earlier than right, false otherwise.
*
* @param {JulianDate} left The first instance.
* @param {JulianDate} right The second instance.
* @returns {Boolean} true if left is earlier than right, false otherwise.
*/
JulianDate.lessThan = function(left, right) {
return JulianDate.compare(left, right) < 0;
};
/**
* Compares the provided instances and returns true if left is earlier than or equal to right, false otherwise.
*
* @param {JulianDate} left The first instance.
* @param {JulianDate} right The second instance.
* @returns {Boolean} true if left is earlier than or equal to right, false otherwise.
*/
JulianDate.lessThanOrEquals = function(left, right) {
return JulianDate.compare(left, right) <= 0;
};
/**
* Compares the provided instances and returns true if left is later than right, false otherwise.
*
* @param {JulianDate} left The first instance.
* @param {JulianDate} right The second instance.
* @returns {Boolean} true if left is later than right, false otherwise.
*/
JulianDate.greaterThan = function(left, right) {
return JulianDate.compare(left, right) > 0;
};
/**
* Compares the provided instances and returns true if left is later than or equal to right, false otherwise.
*
* @param {JulianDate} left The first instance.
* @param {JulianDate} right The second instance.
* @returns {Boolean} true if left is later than or equal to right, false otherwise.
*/
JulianDate.greaterThanOrEquals = function(left, right) {
return JulianDate.compare(left, right) >= 0;
};
/**
* Duplicates this instance.
*
* @param {JulianDate} [result] An existing instance to use for the result.
* @returns {JulianDate} The modified result parameter or a new instance if none was provided.
*/
JulianDate.prototype.clone = function(result) {
return JulianDate.clone(this, result);
};
/**
* Compares this and the provided instance and returns true if they are equal, false otherwise.
*
* @param {JulianDate} [right] The second instance.
* @returns {Boolean} true if the dates are equal; otherwise, false.
*/
JulianDate.prototype.equals = function(right) {
return JulianDate.equals(this, right);
};
/**
* Compares this and the provided instance and returns true if they are within epsilon seconds of
* each other. That is, in order for the dates to be considered equal (and for
* this function to return true), the absolute value of the difference between them, in
* seconds, must be less than epsilon.
*
* @param {JulianDate} [right] The second instance.
* @param {Number} epsilon The maximum number of seconds that should separate the two instances.
* @returns {Boolean} true if the two dates are within epsilon seconds of each other; otherwise false.
*/
JulianDate.prototype.equalsEpsilon = function(right, epsilon) {
return JulianDate.equalsEpsilon(this, right, epsilon);
};
/**
* Creates a string representing this date in ISO8601 format.
*
* @returns {String} A string representing this date in ISO8601 format.
*/
JulianDate.prototype.toString = function() {
return JulianDate.toIso8601(this);
};
/**
* Gets or sets the list of leap seconds used throughout Cesium.
* @memberof JulianDate
* @type {LeapSecond[]}
*/
JulianDate.leapSeconds = [
new LeapSecond(new JulianDate(2441317, 43210.0, TimeStandard.TAI), 10), // January 1, 1972 00:00:00 UTC
new LeapSecond(new JulianDate(2441499, 43211.0, TimeStandard.TAI), 11), // July 1, 1972 00:00:00 UTC
new LeapSecond(new JulianDate(2441683, 43212.0, TimeStandard.TAI), 12), // January 1, 1973 00:00:00 UTC
new LeapSecond(new JulianDate(2442048, 43213.0, TimeStandard.TAI), 13), // January 1, 1974 00:00:00 UTC
new LeapSecond(new JulianDate(2442413, 43214.0, TimeStandard.TAI), 14), // January 1, 1975 00:00:00 UTC
new LeapSecond(new JulianDate(2442778, 43215.0, TimeStandard.TAI), 15), // January 1, 1976 00:00:00 UTC
new LeapSecond(new JulianDate(2443144, 43216.0, TimeStandard.TAI), 16), // January 1, 1977 00:00:00 UTC
new LeapSecond(new JulianDate(2443509, 43217.0, TimeStandard.TAI), 17), // January 1, 1978 00:00:00 UTC
new LeapSecond(new JulianDate(2443874, 43218.0, TimeStandard.TAI), 18), // January 1, 1979 00:00:00 UTC
new LeapSecond(new JulianDate(2444239, 43219.0, TimeStandard.TAI), 19), // January 1, 1980 00:00:00 UTC
new LeapSecond(new JulianDate(2444786, 43220.0, TimeStandard.TAI), 20), // July 1, 1981 00:00:00 UTC
new LeapSecond(new JulianDate(2445151, 43221.0, TimeStandard.TAI), 21), // July 1, 1982 00:00:00 UTC
new LeapSecond(new JulianDate(2445516, 43222.0, TimeStandard.TAI), 22), // July 1, 1983 00:00:00 UTC
new LeapSecond(new JulianDate(2446247, 43223.0, TimeStandard.TAI), 23), // July 1, 1985 00:00:00 UTC
new LeapSecond(new JulianDate(2447161, 43224.0, TimeStandard.TAI), 24), // January 1, 1988 00:00:00 UTC
new LeapSecond(new JulianDate(2447892, 43225.0, TimeStandard.TAI), 25), // January 1, 1990 00:00:00 UTC
new LeapSecond(new JulianDate(2448257, 43226.0, TimeStandard.TAI), 26), // January 1, 1991 00:00:00 UTC
new LeapSecond(new JulianDate(2448804, 43227.0, TimeStandard.TAI), 27), // July 1, 1992 00:00:00 UTC
new LeapSecond(new JulianDate(2449169, 43228.0, TimeStandard.TAI), 28), // July 1, 1993 00:00:00 UTC
new LeapSecond(new JulianDate(2449534, 43229.0, TimeStandard.TAI), 29), // July 1, 1994 00:00:00 UTC
new LeapSecond(new JulianDate(2450083, 43230.0, TimeStandard.TAI), 30), // January 1, 1996 00:00:00 UTC
new LeapSecond(new JulianDate(2450630, 43231.0, TimeStandard.TAI), 31), // July 1, 1997 00:00:00 UTC
new LeapSecond(new JulianDate(2451179, 43232.0, TimeStandard.TAI), 32), // January 1, 1999 00:00:00 UTC
new LeapSecond(new JulianDate(2453736, 43233.0, TimeStandard.TAI), 33), // January 1, 2006 00:00:00 UTC
new LeapSecond(new JulianDate(2454832, 43234.0, TimeStandard.TAI), 34), // January 1, 2009 00:00:00 UTC
new LeapSecond(new JulianDate(2456109, 43235.0, TimeStandard.TAI), 35), // July 1, 2012 00:00:00 UTC
new LeapSecond(new JulianDate(2457204, 43236.0, TimeStandard.TAI), 36), // July 1, 2015 00:00:00 UTC
new LeapSecond(new JulianDate(2457754, 43237.0, TimeStandard.TAI), 37) // January 1, 2017 00:00:00 UTC
];
return JulianDate;
});
/*global define*/
define('Core/clone',[
'./defaultValue'
], function(
defaultValue) {
'use strict';
/**
* Clones an object, returning a new object containing the same properties.
*
* @exports clone
*
* @param {Object} object The object to clone.
* @param {Boolean} [deep=false] If true, all properties will be deep cloned recursively.
* @returns {Object} The cloned object.
*/
function clone(object, deep) {
if (object === null || typeof object !== 'object') {
return object;
}
deep = defaultValue(deep, false);
var result = new object.constructor();
for ( var propertyName in object) {
if (object.hasOwnProperty(propertyName)) {
var value = object[propertyName];
if (deep) {
value = clone(value, deep);
}
result[propertyName] = value;
}
}
return result;
}
return clone;
});
/*global define*/
define('Core/parseResponseHeaders',[], function() {
'use strict';
/**
* Parses the result of XMLHttpRequest's getAllResponseHeaders() method into
* a dictionary.
*
* @exports parseResponseHeaders
*
* @param {String} headerString The header string returned by getAllResponseHeaders(). The format is
* described here: http://www.w3.org/TR/XMLHttpRequest/#the-getallresponseheaders()-method
* @returns {Object} A dictionary of key/value pairs, where each key is the name of a header and the corresponding value
* is that header's value.
*
* @private
*/
function parseResponseHeaders(headerString) {
var headers = {};
if (!headerString) {
return headers;
}
var headerPairs = headerString.split('\u000d\u000a');
for (var i = 0; i < headerPairs.length; ++i) {
var headerPair = headerPairs[i];
// Can't use split() here because it does the wrong thing
// if the header value has the string ": " in it.
var index = headerPair.indexOf('\u003a\u0020');
if (index > 0) {
var key = headerPair.substring(0, index);
var val = headerPair.substring(index + 2);
headers[key] = val;
}
}
return headers;
}
return parseResponseHeaders;
});
/*global define*/
define('Core/RequestErrorEvent',[
'./defined',
'./parseResponseHeaders'
], function(
defined,
parseResponseHeaders) {
'use strict';
/**
* An event that is raised when a request encounters an error.
*
* @constructor
* @alias RequestErrorEvent
*
* @param {Number} [statusCode] The HTTP error status code, such as 404.
* @param {Object} [response] The response included along with the error.
* @param {String|Object} [responseHeaders] The response headers, represented either as an object literal or as a
* string in the format returned by XMLHttpRequest's getAllResponseHeaders() function.
*/
function RequestErrorEvent(statusCode, response, responseHeaders) {
/**
* The HTTP error status code, such as 404. If the error does not have a particular
* HTTP code, this property will be undefined.
*
* @type {Number}
*/
this.statusCode = statusCode;
/**
* The response included along with the error. If the error does not include a response,
* this property will be undefined.
*
* @type {Object}
*/
this.response = response;
/**
* The headers included in the response, represented as an object literal of key/value pairs.
* If the error does not include any headers, this property will be undefined.
*
* @type {Object}
*/
this.responseHeaders = responseHeaders;
if (typeof this.responseHeaders === 'string') {
this.responseHeaders = parseResponseHeaders(this.responseHeaders);
}
}
/**
* Creates a string representing this RequestErrorEvent.
* @memberof RequestErrorEvent
*
* @returns {String} A string representing the provided RequestErrorEvent.
*/
RequestErrorEvent.prototype.toString = function() {
var str = 'Request has failed.';
if (defined(this.statusCode)) {
str += ' Status Code: ' + this.statusCode;
}
return str;
};
return RequestErrorEvent;
});
/**
* @license
*
* Grauw URI utilities
*
* See: http://hg.grauw.nl/grauw-lib/file/tip/src/uri.js
*
* @author Laurens Holst (http://www.grauw.nl/)
*
* Copyright 2012 Laurens Holst
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
/*global define*/
define('ThirdParty/Uri',[],function() {
/**
* Constructs a URI object.
* @constructor
* @class Implementation of URI parsing and base URI resolving algorithm in RFC 3986.
* @param {string|URI} uri A string or URI object to create the object from.
*/
function URI(uri) {
if (uri instanceof URI) { // copy constructor
this.scheme = uri.scheme;
this.authority = uri.authority;
this.path = uri.path;
this.query = uri.query;
this.fragment = uri.fragment;
} else if (uri) { // uri is URI string or cast to string
var c = parseRegex.exec(uri);
this.scheme = c[1];
this.authority = c[2];
this.path = c[3];
this.query = c[4];
this.fragment = c[5];
}
}
// Initial values on the prototype
URI.prototype.scheme = null;
URI.prototype.authority = null;
URI.prototype.path = '';
URI.prototype.query = null;
URI.prototype.fragment = null;
// Regular expression from RFC 3986 appendix B
var parseRegex = new RegExp('^(?:([^:/?#]+):)?(?://([^/?#]*))?([^?#]*)(?:\\?([^#]*))?(?:#(.*))?$');
/**
* Returns the scheme part of the URI.
* In "http://example.com:80/a/b?x#y" this is "http".
*/
URI.prototype.getScheme = function() {
return this.scheme;
};
/**
* Returns the authority part of the URI.
* In "http://example.com:80/a/b?x#y" this is "example.com:80".
*/
URI.prototype.getAuthority = function() {
return this.authority;
};
/**
* Returns the path part of the URI.
* In "http://example.com:80/a/b?x#y" this is "/a/b".
* In "mailto:mike@example.com" this is "mike@example.com".
*/
URI.prototype.getPath = function() {
return this.path;
};
/**
* Returns the query part of the URI.
* In "http://example.com:80/a/b?x#y" this is "x".
*/
URI.prototype.getQuery = function() {
return this.query;
};
/**
* Returns the fragment part of the URI.
* In "http://example.com:80/a/b?x#y" this is "y".
*/
URI.prototype.getFragment = function() {
return this.fragment;
};
/**
* Tests whether the URI is an absolute URI.
* See RFC 3986 section 4.3.
*/
URI.prototype.isAbsolute = function() {
return !!this.scheme && !this.fragment;
};
///**
//* Extensive validation of the URI against the ABNF in RFC 3986
//*/
//URI.prototype.validate
/**
* Tests whether the URI is a same-document reference.
* See RFC 3986 section 4.4.
*
* To perform more thorough comparison, you can normalise the URI objects.
*/
URI.prototype.isSameDocumentAs = function(uri) {
return uri.scheme == this.scheme &&
uri.authority == this.authority &&
uri.path == this.path &&
uri.query == this.query;
};
/**
* Simple String Comparison of two URIs.
* See RFC 3986 section 6.2.1.
*
* To perform more thorough comparison, you can normalise the URI objects.
*/
URI.prototype.equals = function(uri) {
return this.isSameDocumentAs(uri) && uri.fragment == this.fragment;
};
/**
* Normalizes the URI using syntax-based normalization.
* This includes case normalization, percent-encoding normalization and path segment normalization.
* XXX: Percent-encoding normalization does not escape characters that need to be escaped.
* (Although that would not be a valid URI in the first place. See validate().)
* See RFC 3986 section 6.2.2.
*/
URI.prototype.normalize = function() {
this.removeDotSegments();
if (this.scheme)
this.scheme = this.scheme.toLowerCase();
if (this.authority)
this.authority = this.authority.replace(authorityRegex, replaceAuthority).
replace(caseRegex, replaceCase);
if (this.path)
this.path = this.path.replace(caseRegex, replaceCase);
if (this.query)
this.query = this.query.replace(caseRegex, replaceCase);
if (this.fragment)
this.fragment = this.fragment.replace(caseRegex, replaceCase);
};
var caseRegex = /%[0-9a-z]{2}/gi;
var percentRegex = /[a-zA-Z0-9\-\._~]/;
var authorityRegex = /(.*@)?([^@:]*)(:.*)?/;
function replaceCase(str) {
var dec = unescape(str);
return percentRegex.test(dec) ? dec : str.toUpperCase();
}
function replaceAuthority(str, p1, p2, p3) {
return (p1 || '') + p2.toLowerCase() + (p3 || '');
}
/**
* Resolve a relative URI (this) against a base URI.
* The base URI must be an absolute URI.
* See RFC 3986 section 5.2
*/
URI.prototype.resolve = function(baseURI) {
var uri = new URI();
if (this.scheme) {
uri.scheme = this.scheme;
uri.authority = this.authority;
uri.path = this.path;
uri.query = this.query;
} else {
uri.scheme = baseURI.scheme;
if (this.authority) {
uri.authority = this.authority;
uri.path = this.path;
uri.query = this.query;
} else {
uri.authority = baseURI.authority;
if (this.path == '') {
uri.path = baseURI.path;
uri.query = this.query || baseURI.query;
} else {
if (this.path.charAt(0) == '/') {
uri.path = this.path;
uri.removeDotSegments();
} else {
if (baseURI.authority && baseURI.path == '') {
uri.path = '/' + this.path;
} else {
uri.path = baseURI.path.substring(0, baseURI.path.lastIndexOf('/') + 1) + this.path;
}
uri.removeDotSegments();
}
uri.query = this.query;
}
}
}
uri.fragment = this.fragment;
return uri;
};
/**
* Remove dot segments from path.
* See RFC 3986 section 5.2.4
* @private
*/
URI.prototype.removeDotSegments = function() {
var input = this.path.split('/'),
output = [],
segment,
absPath = input[0] == '';
if (absPath)
input.shift();
var sFirst = input[0] == '' ? input.shift() : null;
while (input.length) {
segment = input.shift();
if (segment == '..') {
output.pop();
} else if (segment != '.') {
output.push(segment);
}
}
if (segment == '.' || segment == '..')
output.push('');
if (absPath)
output.unshift('');
this.path = output.join('/');
};
// We don't like this function because it builds up a cache that is never cleared.
// /**
// * Resolves a relative URI against an absolute base URI.
// * Convenience method.
// * @param {String} uri the relative URI to resolve
// * @param {String} baseURI the base URI (must be absolute) to resolve against
// */
// URI.resolve = function(sURI, sBaseURI) {
// var uri = cache[sURI] || (cache[sURI] = new URI(sURI));
// var baseURI = cache[sBaseURI] || (cache[sBaseURI] = new URI(sBaseURI));
// return uri.resolve(baseURI).toString();
// };
// var cache = {};
/**
* Serialises the URI to a string.
*/
URI.prototype.toString = function() {
var result = '';
if (this.scheme)
result += this.scheme + ':';
if (this.authority)
result += '//' + this.authority;
result += this.path;
if (this.query)
result += '?' + this.query;
if (this.fragment)
result += '#' + this.fragment;
return result;
};
return URI;
});
/*global define*/
define('Core/TrustedServers',[
'../ThirdParty/Uri',
'./defined',
'./DeveloperError'
], function(
Uri,
defined,
DeveloperError) {
'use strict';
/**
* A singleton that contains all of the servers that are trusted. Credentials will be sent with
* any requests to these servers.
*
* @exports TrustedServers
*
* @see {@link http://www.w3.org/TR/cors/|Cross-Origin Resource Sharing}
*/
var TrustedServers = {};
var _servers = {};
/**
* Adds a trusted server to the registry
*
* @param {String} host The host to be added.
* @param {Number} port The port used to access the host.
*
* @example
* // Add a trusted server
* TrustedServers.add('my.server.com', 80);
*/
TrustedServers.add = function(host, port) {
if (!defined(host)) {
throw new DeveloperError('host is required.');
}
if (!defined(port) || port <= 0) {
throw new DeveloperError('port is required to be greater than 0.');
}
var authority = host.toLowerCase() + ':' + port;
if (!defined(_servers[authority])) {
_servers[authority] = true;
}
};
/**
* Removes a trusted server from the registry
*
* @param {String} host The host to be removed.
* @param {Number} port The port used to access the host.
*
* @example
* // Remove a trusted server
* TrustedServers.remove('my.server.com', 80);
*/
TrustedServers.remove = function(host, port) {
if (!defined(host)) {
throw new DeveloperError('host is required.');
}
if (!defined(port) || port <= 0) {
throw new DeveloperError('port is required to be greater than 0.');
}
var authority = host.toLowerCase() + ':' + port;
if (defined(_servers[authority])) {
delete _servers[authority];
}
};
function getAuthority(url) {
var uri = new Uri(url);
uri.normalize();
// Removes username:password@ so we just have host[:port]
var authority = uri.getAuthority();
if (!defined(authority)) {
return undefined; // Relative URL
}
if (authority.indexOf('@') !== -1) {
var parts = authority.split('@');
authority = parts[1];
}
// If the port is missing add one based on the scheme
if (authority.indexOf(':') === -1) {
var scheme = uri.getScheme();
if (!defined(scheme)) {
scheme = window.location.protocol;
scheme = scheme.substring(0, scheme.length-1);
}
if (scheme === 'http') {
authority += ':80';
} else if (scheme === 'https') {
authority += ':443';
} else {
return undefined;
}
}
return authority;
}
/**
* Tests whether a server is trusted or not. The server must have been added with the port if it is included in the url.
*
* @param {String} url The url to be tested against the trusted list
*
* @returns {boolean} Returns true if url is trusted, false otherwise.
*
* @example
* // Add server
* TrustedServers.add('my.server.com', 81);
*
* // Check if server is trusted
* if (TrustedServers.contains('https://my.server.com:81/path/to/file.png')) {
* // my.server.com:81 is trusted
* }
* if (TrustedServers.contains('https://my.server.com/path/to/file.png')) {
* // my.server.com isn't trusted
* }
*/
TrustedServers.contains = function(url) {
if (!defined(url)) {
throw new DeveloperError('url is required.');
}
var authority = getAuthority(url);
if (defined(authority) && defined(_servers[authority])) {
return true;
}
return false;
};
/**
* Clears the registry
*
* @example
* // Remove a trusted server
* TrustedServers.clear();
*/
TrustedServers.clear = function() {
_servers = {};
};
return TrustedServers;
});
/*global define*/
define('Core/loadWithXhr',[
'../ThirdParty/when',
'./defaultValue',
'./defined',
'./DeveloperError',
'./RequestErrorEvent',
'./RuntimeError',
'./TrustedServers'
], function(
when,
defaultValue,
defined,
DeveloperError,
RequestErrorEvent,
RuntimeError,
TrustedServers) {
'use strict';
/**
* Asynchronously loads the given URL. Returns a promise that will resolve to
* the result once loaded, or reject if the URL failed to load. The data is loaded
* using XMLHttpRequest, which means that in order to make requests to another origin,
* the server must have Cross-Origin Resource Sharing (CORS) headers enabled.
*
* @exports loadWithXhr
*
* @param {Object} options Object with the following properties:
* @param {String|Promise.} options.url The URL of the data, or a promise for the URL.
* @param {String} [options.responseType] The type of response. This controls the type of item returned.
* @param {String} [options.method='GET'] The HTTP method to use.
* @param {String} [options.data] The data to send with the request, if any.
* @param {Object} [options.headers] HTTP headers to send with the request, if any.
* @param {String} [options.overrideMimeType] Overrides the MIME type returned by the server.
* @returns {Promise.